Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29380” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29380400 × 620 × mm | FAG29380-E1-XL-MB400 × 620 × 132 mm | KOYO29380R400 × 620 × 44 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29380 | 29380-E1-XL-MB | 29380R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29380 | — |
| Bore diameterd | 400 mm | 400 mm | 400 mm |
| Outside diameterD | 620 mm | 620 mm | 620 mm |
| WidthB | — | 132 mm | 44 mm |
| HeightH | 132 mm | — | — |
| Basic dynamic load ratingC | 3450 kN | — | — |
| Basic static load ratingC0 | 14600 kN | — | — |
| Fatigue load limitPu | 1200 kN | — | 1080 kN |
| Reference speednref | 530 r/min | 500 r/min | — |
| Limiting speednG | 950 r/min | 990 r/min | 500 r/min |
| Mass≈m | 146 kg | 143.16 kg | 144 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 494 mm | — |
| Bore diameter housing washerD1 | — | 19.449 in | — |
| Rip diameter shaft washerd1 | — | 575 mm | — |
| Rip diameter shaft washerd1 | — | 22.638 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 64 mm | — |
| Height of the housing washerT1 | — | 2.52 in | — |
| Height of shaft washerT2 | — | 48 mm | — |
| Height of shaft washerT2 | — | 1.89 in | — |
| Height of the shaft washerT3 | — | 83 mm | — |
| Height of the shaft washerT3 | — | 3.268 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 127 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 5 in | — |
| Distance of the center pointA | — | 225 mm | — |
| Distance of the center pointA | — | 8.858 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 510 mm | — | — |
| Diameter of housing abutmentD a | max. 550 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 20 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 596 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 494 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 43 mm | — | — |
| Height shaft washer + cageB 1 | 127 mm | — | — |
| Height housing washerC | 64 mm | — | — |
| Distance from shaft washer end side face to pressure points | 225 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 146.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 132 mm | — |
| Section heightT | — | 5.197 in | — |
| Basic dynamic load rating, axialCa | — | 4,550,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,022,931.655 lbf | — |
| Basic static load rating, axialC0a | — | 16,300,000 N | — |
| Basic static load rating, axialC0a | — | 3,664,568.345 lbf | — |
| Fatigue load limit, axialCua | — | 1,720,000 N | — |
| Fatigue load limit, axialCua | — | 386,690.647 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396508 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29380 | — |
| Old Designation | — | ["29380-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390000870000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29380-E1-XL-MB | — |
| Mounting Manager ID | — | 29380-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 510 mm | — |
| Minimum diameter shaft shoulderda min | — | 20.079 in | — |
| Maximum diameter of housing shoulderDa max | — | 557 mm | — |
| Maximum diameter of housing shoulderDa max | — | 21.929 in | — |
| Minimum bore diameter housingDb min | — | 634 mm | — |
| Minimum bore diameter housingDb min | — | 24.961 in | — |
| Maximum distance sleevedb max | — | 429 mm | — |
| Maximum distance sleevedb max | — | 16.89 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 540.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 180.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 620 mm |
| T | — | — | 132 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 4630 kN |
| Bore Diameter (D) | — | 400 mm | — |
| Basic Load Ratings C0A | — | — | 16100 kN |
| Outside Diameter (D) | — | 620 mm | — |
| Fatigue Load Limit : Cu | — | — | 1080 kN |
| Height (T) | — | 132 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 500 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 4,550,000 N | — |
| D1 | — | — | 494 mm |
| Basic Static Load Rating, Axial (C0A) | — | 16,300,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 44 mm |
| Limiting Speed (Ng) | — | 990 1/min | — |
| B1 | — | — | 127 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 64 mm |
| Reference Speed (Nϑr) | — | 500 1/min | — |
| A | — | — | 225 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 634 mm | — |
| Da(Min.) | — | — | 500 mm |
| Bore Diameter Housing Washer (D1) | — | 494 mm | — |
| Da(Max.) | — | — | 550 mm |
| Height Of Shaft Washer (T2) | — | 48 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Height Of The Housing Washer (T1) | — | 64 mm | — |
| Mass(Refer.) | — | — | 144 kg |
| Rip Diameter Shaft Washer (D1) | — | 575 mm | — |
| Height Of The Shaft Washer (T3) | — | 83 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 510 mm | — |
| Distance Of The Center Point (A) | — | 225 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 127 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 557 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 429 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,720,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.