Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29376” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29376380 × 600 × mm | FAG29376-E1-XL-MB380 × 600 × 132 mm | KOYO29376R380 × 600 × 44 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29376 | 29376-E1-XL-MB | 29376R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29376 | — |
| Bore diameterd | 380 mm | 380 mm | 380 mm |
| Outside diameterD | 600 mm | 600 mm | 600 mm |
| WidthB | — | 132 mm | 44 mm |
| HeightH | 132 mm | — | — |
| Basic dynamic load ratingC | 3340 kN | — | — |
| Basic static load ratingC0 | 14000 kN | — | — |
| Fatigue load limitPu | 1160 kN | — | 1030 kN |
| Reference speednref | 530 r/min | 530 r/min | — |
| Limiting speednG | 1000 r/min | 1030 r/min | 500 r/min |
| Mass≈m | 150 kg | 135.8 kg | 141 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 477 mm | — |
| Bore diameter housing washerD1 | — | 18.78 in | — |
| Rip diameter shaft washerd1 | — | 555 mm | — |
| Rip diameter shaft washerd1 | — | 21.85 in | — |
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Height of the housing washerT1 | — | 63.5 mm | — |
| Height of the housing washerT1 | — | 2.5 in | — |
| Height of shaft washerT2 | — | 48 mm | — |
| Height of shaft washerT2 | — | 1.89 in | — |
| Height of the shaft washerT3 | — | 83 mm | — |
| Height of the shaft washerT3 | — | 3.268 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 127 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 5 in | — |
| Distance of the center pointA | — | 216 mm | — |
| Distance of the center pointA | — | 8.504 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 495 mm | — | — |
| Diameter of housing abutmentD a | max. 535 mm | — | — |
| Fillet radiusr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 19 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 580 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 477 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 45 mm | — | — |
| Height shaft washer + cageB 1 | 127 mm | — | — |
| Height housing washerC | 63.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 216 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — | — |
| Logistics | |||
| Product net weight | 150.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 132 mm | — |
| Section heightT | — | 5.197 in | — |
| Basic dynamic load rating, axialCa | — | 4,500,000 N | — |
| Basic dynamic load rating, axialCa | — | 1,011,690.647 lbf | — |
| Basic static load rating, axialC0a | — | 15,400,000 N | — |
| Basic static load rating, axialC0a | — | 3,462,230.216 lbf | — |
| Fatigue load limit, axialCua | — | 1,650,000 N | — |
| Fatigue load limit, axialCua | — | 370,953.237 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396506 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29376 | — |
| Old Designation | — | ["29376-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390000790000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29376-E1-XL-MB | — |
| Mounting Manager ID | — | 29376-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 485 mm | — |
| Minimum diameter shaft shoulderda min | — | 19.094 in | — |
| Maximum diameter of housing shoulderDa max | — | 538 mm | — |
| Maximum diameter of housing shoulderDa max | — | 21.181 in | — |
| Minimum bore diameter housingDb min | — | 612 mm | — |
| Minimum bore diameter housingDb min | — | 24.094 in | — |
| Maximum distance sleevedb max | — | 404 mm | — |
| Maximum distance sleevedb max | — | 15.906 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 555.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 185.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 600 mm |
| T | — | — | 132 mm |
| R(Min.) | — | — | 6 mm |
| Basic Load Ratings Ca | — | — | 4430 kN |
| Bore Diameter (D) | — | 380 mm | — |
| Basic Load Ratings C0A | — | — | 15000 kN |
| Outside Diameter (D) | — | 600 mm | — |
| Fatigue Load Limit : Cu | — | — | 1030 kN |
| Height (T) | — | 132 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 500 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 4,500,000 N | — |
| D1 | — | — | 477 mm |
| Basic Static Load Rating, Axial (C0A) | — | 15,400,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 44 mm |
| Limiting Speed (Ng) | — | 1,030 1/min | — |
| B1 | — | — | 127 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 63 mm |
| Reference Speed (Nϑr) | — | 530 1/min | — |
| A | — | — | 216 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 612 mm | — |
| Da(Min.) | — | — | 480 mm |
| Bore Diameter Housing Washer (D1) | — | 477 mm | — |
| Da(Max.) | — | — | 525 mm |
| Height Of Shaft Washer (T2) | — | 48 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Height Of The Housing Washer (T1) | — | 63.5 mm | — |
| Mass(Refer.) | — | — | 141 kg |
| Rip Diameter Shaft Washer (D1) | — | 555 mm | — |
| Height Of The Shaft Washer (T3) | — | 83 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 485 mm | — |
| Distance Of The Center Point (A) | — | 216 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 127 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 538 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 404 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,650,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.