Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29372” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29372360 × 560 × mm | FAG29372-E1-XL-MB360 × 560 × 122 mm | KOYO29372R360 × 560 × 41 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29372 | 29372-E1-XL-MB | 29372R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29372 | — |
| Bore diameterd | 360 mm | 360 mm | 360 mm |
| Outside diameterD | 560 mm | 560 mm | 560 mm |
| WidthB | — | 122 mm | 41 mm |
| HeightH | 122 mm | — | — |
| Basic dynamic load ratingC | 2760 kN | — | — |
| Basic static load ratingC0 | 11600 kN | — | — |
| Fatigue load limitPu | 980 kN | — | 923 kN |
| Reference speednref | 600 r/min | 570 r/min | — |
| Limiting speednG | 1100 r/min | 1110 r/min | 550 r/min |
| Mass≈m | 110 kg | 109.34 kg | 110 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 448 mm | — |
| Bore diameter housing washerD1 | — | 17.638 in | — |
| Rip diameter shaft washerd1 | — | 520 mm | — |
| Rip diameter shaft washerd1 | — | 20.472 in | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Height of the housing washerT1 | — | 59.5 mm | — |
| Height of the housing washerT1 | — | 2.343 in | — |
| Height of shaft washerT2 | — | 44 mm | — |
| Height of shaft washerT2 | — | 1.732 in | — |
| Height of the shaft washerT3 | — | 75 mm | — |
| Height of the shaft washerT3 | — | 2.953 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 117 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 4.606 in | — |
| Distance of the center pointA | — | 202 mm | — |
| Distance of the center pointA | — | 7.953 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 460 mm | — | — |
| Diameter of housing abutmentD a | max. 500 mm | — | — |
| Fillet radiusr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 13 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 540 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 448 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 40.5 mm | — | — |
| Height shaft washer + cageB 1 | 117 mm | — | — |
| Height housing washerC | 59.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 202 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — | — |
| Logistics | |||
| Product net weight | 110.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 122 mm | — |
| Section heightT | — | 4.803 in | — |
| Basic dynamic load rating, axialCa | — | 3,750,000 N | — |
| Basic dynamic load rating, axialCa | — | 843,075.54 lbf | — |
| Basic static load rating, axialC0a | — | 13,000,000 N | — |
| Basic static load rating, axialC0a | — | 2,922,661.871 lbf | — |
| Fatigue load limit, axialCua | — | 1,430,000 N | — |
| Fatigue load limit, axialCua | — | 321,492.806 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396504 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29372 | — |
| Old Designation | — | ["29372-E1-MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390000600000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29372-E1-XL-MB | — |
| Mounting Manager ID | — | 29372-E1-XL-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 455 mm | — |
| Minimum diameter shaft shoulderda min | — | 17.913 in | — |
| Maximum diameter of housing shoulderDa max | — | 504 mm | — |
| Maximum diameter of housing shoulderDa max | — | 19.843 in | — |
| Minimum bore diameter housingDb min | — | 572 mm | — |
| Minimum bore diameter housingDb min | — | 22.52 in | — |
| Maximum distance sleevedb max | — | 385 mm | — |
| Maximum distance sleevedb max | — | 15.157 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 407.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 135.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 560 mm |
| T | — | — | 122 mm |
| R(Min.) | — | — | 5 mm |
| Basic Load Ratings Ca | — | — | 3890 kN |
| Bore Diameter (D) | — | 360 mm | — |
| Basic Load Ratings C0A | — | — | 13200 kN |
| Outside Diameter (D) | — | 560 mm | — |
| Fatigue Load Limit : Cu | — | — | 923 kN |
| Height (T) | — | 122 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 550 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 3,750,000 N | — |
| D1 | — | — | 448 mm |
| Basic Static Load Rating, Axial (C0A) | — | 13,000,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 41 mm |
| Limiting Speed (Ng) | — | 1,110 1/min | — |
| B1 | — | — | 117 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 59 mm |
| Reference Speed (Nϑr) | — | 570 1/min | — |
| A | — | — | 202 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 572 mm | — |
| Da(Min.) | — | — | 450 mm |
| Bore Diameter Housing Washer (D1) | — | 448 mm | — |
| Da(Max.) | — | — | 495 mm |
| Height Of Shaft Washer (T2) | — | 44 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Height Of The Housing Washer (T1) | — | 59.5 mm | — |
| Mass(Refer.) | — | — | 110 kg |
| Rip Diameter Shaft Washer (D1) | — | 520 mm | — |
| Height Of The Shaft Washer (T3) | — | 75 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 455 mm | — |
| Distance Of The Center Point (A) | — | 202 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 117 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 504 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 385 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,430,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.