Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29360” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29360 E300 × 480 × mm | FAG29360-E1-XL300 × 480 × 109 mm | KOYO29360300 × 480 × 37 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29360 E | 29360-E1-XL | 29360 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29360 | — |
| Bore diameterd | 300 mm | 300 mm | 300 mm |
| Outside diameterD | 480 mm | 480 mm | 480 mm |
| WidthB | — | 109 mm | 37 mm |
| HeightH | 109 mm | — | — |
| Basic dynamic load ratingC | 3100 kN | — | — |
| Basic static load ratingC0 | 10600 kN | — | — |
| Fatigue load limitPu | 930 kN | — | 496 kN |
| Reference speednref | 750 r/min | 680 r/min | — |
| Limiting speednG | 1200 r/min | 1320 r/min | 700 r/min |
| Mass≈m | 66 kg | 66.1 kg | 74.9 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 372 mm | — |
| Bore diameter housing washerD1 | — | 14.646 in | — |
| Rip diameter shaft washerd1 | — | 439.6 mm | — |
| Rip diameter shaft washerd1 | — | 17.307 in | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Height of the housing washerT1 | — | 51 mm | — |
| Height of the housing washerT1 | — | 2.008 in | — |
| Height of the shaft washerT3 | — | 70 mm | — |
| Height of the shaft washerT3 | — | 2.756 in | — |
| Distance shaft washer - cageT5 | — | 97.9 mm | — |
| Distance shaft washer - cageT5 | — | 3.854 in | — |
| Distance of the center pointA | — | 168 mm | — |
| Distance of the center pointA | — | 6.614 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 385 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 313 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 329 mm | — | — |
| Diameter of housing abutmentD a | max. 423 mm | — | — |
| Fillet radiusr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 11 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 434 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 372 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 70 mm | — | — |
| Height shaft washer + cageB 1 | 98.9 mm | — | — |
| Height housing washerC | 51 mm | — | — |
| Distance from shaft washer end side face to pressure points | 168 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — | — |
| Logistics | |||
| Product net weight | 66.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 3,200,000 N | — |
| Basic dynamic load rating, axialCa | — | 719,424.46 lbf | — |
| Basic static load rating, axialC0a | — | 10,500,000 N | — |
| Basic static load rating, axialC0a | — | 2,360,611.511 lbf | — |
| Fatigue load limit, axialCua | — | 1,160,000 N | — |
| Fatigue load limit, axialCua | — | 260,791.367 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396639 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29360 | — |
| Old Designation | — | ["29360-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0390000280000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29360-E1-XL | — |
| Mounting Manager ID | — | 29360-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 385 mm | — |
| Minimum diameter shaft shoulderda min | — | 15.157 in | — |
| Maximum diameter of housing shoulderDa max | — | 429 mm | — |
| Maximum diameter of housing shoulderDa max | — | 16.89 in | — |
| Minimum bore diameter housingDb min | — | 490 mm | — |
| Minimum bore diameter housingDb min | — | 19.291 in | — |
| Maximum distance sleevedb max | — | 329 mm | — |
| Maximum distance sleevedb max | — | 12.953 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 318 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 12.52 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 244.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 81.2 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 480 mm |
| T | — | — | 109 mm |
| R(Min.) | — | — | 5 mm |
| Basic Load Ratings Ca | — | — | 2470 kN |
| Bore Diameter (D) | — | 300 mm | — |
| Basic Load Ratings C0A | — | — | 7780 kN |
| Outside Diameter (D) | — | 480 mm | — |
| Fatigue Load Limit : Cu | — | — | 496 kN |
| Height (T) | — | 109 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 700 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 3,200,000 N | — |
| D1 | — | — | 379 mm |
| Basic Static Load Rating, Axial (C0A) | — | 10,500,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 37 mm |
| Limiting Speed (Ng) | — | 1,320 1/min | — |
| B1 | — | — | 105 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 50 mm |
| Reference Speed (Nϑr) | — | 680 1/min | — |
| A | — | — | 168 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 490 mm | — |
| Da(Min.) | — | — | 380 mm |
| Bore Diameter Housing Washer (D1) | — | 372 mm | — |
| Da(Max.) | — | — | 420 mm |
| Height Of The Housing Washer (T1) | — | 51 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Rip Diameter Shaft Washer (D1) | — | 439.6 mm | — |
| Mass(Refer.) | — | — | 74.9 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 70 mm | — |
| Distance Shaft Washer Cage (T5) | — | 97.9 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 318 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 385 mm | — |
| Distance Of The Center Point (A) | — | 168 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 429 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 329 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,160,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.