Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29340-E1-XL. This table explores the base group 29340; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29340” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29340 E200 × 340 × mm | FAG29340-E1-XL200 × 340 × 85 mm | KOYO29340R200 × 340 × 29 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29340 E | 29340-E1-XL | 29340R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29340 | — |
| Bore diameterd | 200 mm | 200 mm | 200 mm |
| Outside diameterD | 340 mm | 340 mm | 340 mm |
| WidthB | — | 85 mm | 29 mm |
| HeightH | 85 mm | — | — |
| Basic dynamic load ratingC | 1860 kN | — | — |
| Basic static load ratingC0 | 5500 kN | — | — |
| Fatigue load limitPu | 550 kN | — | 415 kN |
| Reference speednref | 1000 r/min | 1030 r/min | — |
| Limiting speednG | 1700 r/min | 1940 r/min | 1050 r/min |
| Mass≈m | 28.4 kg | 27.14 kg | 31.2 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 257 mm | — |
| Bore diameter housing washerD1 | — | 10.118 in | — |
| Rip diameter shaft washerd1 | — | 308.8 mm | — |
| Rip diameter shaft washerd1 | — | 12.157 in | — |
| Minimum chamfer dimensionrmin | — | 4 mm | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — |
| Height of the housing washerT1 | — | 40 mm | — |
| Height of the housing washerT1 | — | 1.575 in | — |
| Height of the shaft washerT3 | — | 53.5 mm | — |
| Height of the shaft washerT3 | — | 2.106 in | — |
| Distance shaft washer - cageT5 | — | 75.5 mm | — |
| Distance shaft washer - cageT5 | — | 2.972 in | — |
| Distance of the center pointA | — | 116 mm | — |
| Distance of the center pointA | — | 4.567 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 265 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 211 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 224 mm | — | — |
| Diameter of housing abutmentD a | max. 297 mm | — | — |
| Fillet radiusr a | max. 3 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 2.9 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 304 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 257 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 53.5 mm | — | — |
| Height shaft washer + cageB 1 | 76.7 mm | — | — |
| Height housing washerC | 40 mm | — | — |
| Distance from shaft washer end side face to pressure points | 116 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 4 mm | — | — |
| Logistics | |||
| Product net weight | 28.4 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 1,900,000 N | — |
| Basic dynamic load rating, axialCa | — | 427,158.273 lbf | — |
| Basic static load rating, axialC0a | — | 5,600,000 N | — |
| Basic static load rating, axialC0a | — | 1,258,992.806 lbf | — |
| Fatigue load limit, axialCua | — | 670,000 N | — |
| Fatigue load limit, axialCua | — | 150,629.496 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396624 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29340 | — |
| Old Designation | — | ["29340-E1"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0389999350000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29340-E1-XL | — |
| Mounting Manager ID | — | 29340-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 265 mm | — |
| Minimum diameter shaft shoulderda min | — | 10.433 in | — |
| Maximum diameter of housing shoulderDa max | — | 298 mm | — |
| Maximum diameter of housing shoulderDa max | — | 11.732 in | — |
| Minimum bore diameter housingDb min | — | 348 mm | — |
| Minimum bore diameter housingDb min | — | 13.701 in | — |
| Maximum distance sleevedb max | — | 224 mm | — |
| Maximum distance sleevedb max | — | 8.819 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 213 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 8.386 in | — |
| Maximum recess radiusra max | — | 3 mm | — |
| Maximum recess radiusra max | — | 0.118 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 105.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 35.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 340 mm |
| T | — | — | 85 mm |
| R(Min.) | — | — | 4 mm |
| Basic Load Ratings Ca | — | — | 1810 kN |
| Bore Diameter (D) | — | 200 mm | — |
| Basic Load Ratings C0A | — | — | 5040 kN |
| Outside Diameter (D) | — | 340 mm | — |
| Fatigue Load Limit : Cu | — | — | 415 kN |
| Height (T) | — | 85 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 1050 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 1,900,000 N | — |
| D1 | — | — | 261 mm |
| Basic Static Load Rating, Axial (C0A) | — | 5,600,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 29 mm |
| Limiting Speed (Ng) | — | 1,940 1/min | — |
| B1 | — | — | 81 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 41 mm |
| Reference Speed (Nϑr) | — | 1,030 1/min | — |
| A | — | — | 116 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 348 mm | — |
| Da(Min.) | — | — | 265 mm |
| Bore Diameter Housing Washer (D1) | — | 257 mm | — |
| Da(Max.) | — | — | 295 mm |
| Height Of The Housing Washer (T1) | — | 40 mm | — |
| Ra(Max.) | — | — | 3 mm |
| Rip Diameter Shaft Washer (D1) | — | 308.8 mm | — |
| Mass(Refer.) | — | — | 31.2 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 53.5 mm | — |
| Distance Shaft Washer Cage (T5) | — | 75.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 213 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 265 mm | — |
| Distance Of The Center Point (A) | — | 116 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 298 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 224 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 670,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.