Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29336-E1-XL. This table explores the base group 29336; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29336” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29336 E180 × 300 × mm | FAG29336-E1-XL180 × 300 × 73 mm | KOYO29336R180 × 300 × 25 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29336 E | 29336-E1-XL | 29336R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29336 | — |
| Bore diameterd | 180 mm | 180 mm | 180 mm |
| Outside diameterD | 300 mm | 300 mm | 300 mm |
| WidthB | — | 73 mm | 25 mm |
| HeightH | 73 mm | — | — |
| Basic dynamic load ratingC | 1430 kN | — | — |
| Basic static load ratingC0 | 4300 kN | — | — |
| Fatigue load limitPu | 440 kN | — | 330 kN |
| Reference speednref | 1200 r/min | 1170 r/min | — |
| Limiting speednG | 2000 r/min | 2240 r/min | 1250 r/min |
| Mass≈m | 19 kg | 17.994 kg | 20.7 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 227 mm | — |
| Bore diameter housing washerD1 | — | 8.937 in | — |
| Rip diameter shaft washerd1 | — | 274.5 mm | — |
| Rip diameter shaft washerd1 | — | 10.807 in | — |
| Minimum chamfer dimensionrmin | — | 3 mm | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — |
| Height of the housing washerT1 | — | 35.5 mm | — |
| Height of the housing washerT1 | — | 1.398 in | — |
| Height of the shaft washerT3 | — | 46 mm | — |
| Height of the shaft washerT3 | — | 1.811 in | — |
| Distance shaft washer - cageT5 | — | 64.5 mm | — |
| Distance shaft washer - cageT5 | — | 2.539 in | — |
| Distance of the center pointA | — | 103 mm | — |
| Distance of the center pointA | — | 4.055 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 235 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 189 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 195 mm | — | — |
| Diameter of housing abutmentD a | max. 262 mm | — | — |
| Fillet radiusr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 1.8 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 270 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 227 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 46 mm | — | — |
| Height shaft washer + cageB 1 | 66.2 mm | — | — |
| Height housing washerC | 35.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 103 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 3 mm | — | — |
| Logistics | |||
| Product net weight | 19.0 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 1,460,000 N | — |
| Basic dynamic load rating, axialCa | — | 328,237.41 lbf | — |
| Basic static load rating, axialC0a | — | 4,300,000 N | — |
| Basic static load rating, axialC0a | — | 966,726.619 lbf | — |
| Fatigue load limit, axialCua | — | 530,000 N | — |
| Fatigue load limit, axialCua | — | 119,154.676 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396618 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29336 | — |
| Old Designation | — | ["29336-E1"] | — |
| Gpsd Group | — | F02 | — |
| Product Line Id | — | 37 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0389998970000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29336-E1-XL | — |
| Mounting Manager ID | — | 29336-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 235 mm | — |
| Minimum diameter shaft shoulderda min | — | 9.252 in | — |
| Maximum diameter of housing shoulderDa max | — | 263 mm | — |
| Maximum diameter of housing shoulderDa max | — | 10.354 in | — |
| Minimum bore diameter housingDb min | — | 304 mm | — |
| Minimum bore diameter housingDb min | — | 11.969 in | — |
| Maximum distance sleevedb max | — | 195 mm | — |
| Maximum distance sleevedb max | — | 7.677 in | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 190 mm | — |
| Maximum champfer diameter of distance sleevedb1 max | — | 7.48 in | — |
| Maximum recess radiusra max | — | 2.5 mm | — |
| Maximum recess radiusra max | — | 0.098 in | — |
| Angle of champfer of the distance sleeve | — | 30 ° | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 70.4 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 23.4 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 300 mm |
| T | — | — | 73 mm |
| R(Min.) | — | — | 3 mm |
| Basic Load Ratings Ca | — | — | 1380 kN |
| Bore Diameter (D) | — | 180 mm | — |
| Basic Load Ratings C0A | — | — | 3170 kN |
| Outside Diameter (D) | — | 300 mm | — |
| Fatigue Load Limit : Cu | — | — | 330 kN |
| Height (T) | — | 73 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 1250 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 1,460,000 N | — |
| D1 | — | — | 232 mm |
| Basic Static Load Rating, Axial (C0A) | — | 4,300,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 25 mm |
| Limiting Speed (Ng) | — | 2,240 1/min | — |
| B1 | — | — | 69 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 35 mm |
| Reference Speed (Nϑr) | — | 1,170 1/min | — |
| A | — | — | 103 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 304 mm | — |
| Da(Min.) | — | — | 235 mm |
| Bore Diameter Housing Washer (D1) | — | 227 mm | — |
| Da(Max.) | — | — | 260 mm |
| Height Of The Housing Washer (T1) | — | 35.5 mm | — |
| Ra(Max.) | — | — | 2.5 mm |
| Rip Diameter Shaft Washer (D1) | — | 274.5 mm | — |
| Mass(Refer.) | — | — | 20.7 kg |
| Angle Of Champfer Of The Distance Sleeve (Angle Of Cha) | — | 30 ° | — |
| Height Of The Shaft Washer (T3) | — | 46 mm | — |
| Distance Shaft Washer Cage (T5) | — | 64.5 mm | — |
| Maximum Champfer Diameter Of Distance Sleeve (Db1 Max) | — | 190 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 235 mm | — |
| Distance Of The Center Point (A) | — | 103 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 263 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 195 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 530,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.