Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29320-E1-XL. This table explores the base group 29320; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29320” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29320 E100 × 170 × mm | FAG29320-E1-XL100 × 170 × 42 mm | KOYO29320R100 × 170 × 14 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29320 E | 29320-E1-XL | 29320R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29320 | — |
| Bore diameterd | 100 mm | 100 mm | 100 mm |
| Outside diameterD | 170 mm | 170 mm | 170 mm |
| WidthB | — | 42 mm | 14 mm |
| HeightH | 42 mm | — | — |
| Basic dynamic load ratingC | 465 kN | — | — |
| Basic static load ratingC0 | 1290 kN | — | — |
| Fatigue load limitPu | 156 kN | — | 118 kN |
| Reference speednref | 2200 r/min | 1960 r/min | — |
| Limiting speednG | 3600 r/min | 4200 r/min | 2300 r/min |
| Mass≈m | 3.58 kg | 3.496 kg | 3.91 kg |
| Cage | Sheet metal | JP — Sheet metal cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 127.5 mm | — |
| Bore diameter housing washerD1 | — | 5.02 in | — |
| Rip diameter shaft washerd1 | — | 156 mm | — |
| Rip diameter shaft washerd1 | — | 6.142 in | — |
| Minimum chamfer dimensionrmin | — | 1.5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.059 in | — |
| Height of the housing washerT1 | — | 20.5 mm | — |
| Height of the housing washerT1 | — | 0.807 in | — |
| Height of the shaft washerT3 | — | 26.2 mm | — |
| Height of the shaft washerT3 | — | 1.031 in | — |
| Distance shaft washer - cageT5 | — | 37.5 mm | — |
| Distance shaft washer - cageT5 | — | 1.476 in | — |
| Distance of the center pointA | — | 58 mm | — |
| Distance of the center pointA | — | 2.283 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 130 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 107 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 107 mm | — | — |
| Diameter of housing abutmentD a | max. 147 mm | — | — |
| Fillet radiusr a | max. 1.5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 0.16 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 152 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 128 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 26.2 mm | — | — |
| Height shaft washer + cageB 1 | 36.3 mm | — | — |
| Height housing washerC | 20.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 58 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 1.5 mm | — | — |
| Logistics | |||
| Product net weight | 3.58 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, axialCa | — | 495,000 N | — |
| Basic dynamic load rating, axialCa | — | 111,285.971 lbf | — |
| Basic static load rating, axialC0a | — | 1,340,000 N | — |
| Basic static load rating, axialC0a | — | 301,258.993 lbf | — |
| Fatigue load limit, axialCua | — | 194,000 N | — |
| Fatigue load limit, axialCua | — | 43,615.108 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396594 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29320 | — |
| Old Designation | — | ["29320-E1"] | — |
| Gpsd Group | — | F02 | — |
| Product Line Id | — | 37 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0389997300000 | — |
| Base product | — | 2305110302 | — |
| Bearing X designation | — | 29320-E1-XL | — |
| Mounting Manager ID | — | 29320-E1-XL | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 135 mm | — |
| Minimum diameter shaft shoulderda min | — | 5.315 in | — |
| Maximum diameter of housing shoulderDa max | — | 148 mm | — |
| Maximum diameter of housing shoulderDa max | — | 5.827 in | — |
| Minimum bore diameter housingDb min | — | 173 mm | — |
| Minimum bore diameter housingDb min | — | 6.811 in | — |
| Maximum distance sleevedb max | — | 107 mm | — |
| Maximum distance sleevedb max | — | 4.213 in | — |
| Maximum recess radiusra max | — | 1.5 mm | — |
| Maximum recess radiusra max | — | 0.059 in | — |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 293..-E1-XL, no flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Indicative carbon footprint for new product | 13.2 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 170 mm |
| T | — | — | 42 mm |
| R(Min.) | — | — | 1.5 mm |
| Basic Load Ratings Ca | — | — | 481 kN |
| Bore Diameter (D) | — | 100 mm | — |
| Basic Load Ratings C0A | — | — | 1270 kN |
| Outside Diameter (D) | — | 170 mm | — |
| Fatigue Load Limit : Cu | — | — | 118 kN |
| Height (T) | — | 42 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 2300 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 495,000 N | — |
| D1 | — | — | 129 mm |
| Basic Static Load Rating, Axial (C0A) | — | 1,340,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 14 mm |
| Limiting Speed (Ng) | — | 4,200 1/min | — |
| B1 | — | — | 40 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 20.8 mm |
| Reference Speed (Nϑr) | — | 1,960 1/min | — |
| A | — | — | 58 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 173 mm | — |
| Da(Min.) | — | — | 130 mm |
| Bore Diameter Housing Washer (D1) | — | 127.5 mm | — |
| Da(Max.) | — | — | 150 mm |
| Height Of The Housing Washer (T1) | — | 20.5 mm | — |
| Ra(Max.) | — | — | 1.5 mm |
| Rip Diameter Shaft Washer (D1) | — | 156 mm | — |
| Mass(Refer.) | — | — | 3.91 kg |
| Height Of The Shaft Washer (T3) | — | 26.2 mm | — |
| Distance Shaft Washer Cage (T5) | — | 37.5 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 135 mm | — |
| Distance Of The Center Point (A) | — | 58 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 148 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 107 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 194,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.