Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29296” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29296480 × 650 × mm | FAG29296-E1-MB480 × 650 × 103 mm | KOYO29296480 × 650 × 33 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29296 | 29296-E1-MB | 29296 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29296 | — |
| Bore diameterd | 480 mm | 480 mm | 480 mm |
| Outside diameterD | 650 mm | 650 mm | 650 mm |
| WidthB | — | 103 mm | 33 mm |
| HeightH | 103 mm | — | — |
| Basic dynamic load ratingC | 2350 kN | — | — |
| Basic static load ratingC0 | 11800 kN | — | — |
| Fatigue load limitPu | 950 kN | — | 531 kN |
| Reference speednref | 560 r/min | 520 r/min | — |
| Limiting speednG | 900 r/min | 920 r/min | 500 r/min |
| Mass≈m | 100 kg | 96 kg | 89 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 556 mm | — |
| Bore diameter housing washerD1 | — | 21.89 in | — |
| Rip diameter shaft washerd1 | — | 620 mm | — |
| Rip diameter shaft washerd1 | — | 24.409 in | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Height of the housing washerT1 | — | 55 mm | — |
| Height of the housing washerT1 | — | 2.165 in | — |
| Height of shaft washerT2 | — | 37 mm | — |
| Height of shaft washerT2 | — | 1.457 in | — |
| Height of the shaft washerT3 | — | 62 mm | — |
| Height of the shaft washerT3 | — | 2.441 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 99 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 3.898 in | — |
| Distance of the center pointA | — | 259 mm | — |
| Distance of the center pointA | — | 10.197 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 570 mm | — | — |
| Diameter of housing abutmentD a | max. 595 mm | — | — |
| Fillet radiusr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 13 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 635 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 556 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 33 mm | — | — |
| Height shaft washer + cageB 1 | 99 mm | — | — |
| Height housing washerC | 53.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 259 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — | — |
| Logistics | |||
| Product net weight | 100.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 103 mm | — |
| Section heightT | — | 4.055 in | — |
| Basic dynamic load rating, axialCa | — | 2,650,000 N | — |
| Basic dynamic load rating, axialCa | — | 595,773.381 lbf | — |
| Basic static load rating, axialC0a | — | 13,700,000 N | — |
| Basic static load rating, axialC0a | — | 3,080,035.971 lbf | — |
| Fatigue load limit, axialCua | — | 1,330,000 N | — |
| Fatigue load limit, axialCua | — | 299,010.791 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396496 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29296 | — |
| Old Designation | — | ["29296E1MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0389995950000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29296-E1-MB | — |
| Mounting Manager ID | — | 29296-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 565 mm | — |
| Minimum diameter shaft shoulderda min | — | 22.244 in | — |
| Maximum diameter of housing shoulderDa max | — | 603 mm | — |
| Maximum diameter of housing shoulderDa max | — | 23.74 in | — |
| Minimum bore diameter housingDb min | — | 662 mm | — |
| Minimum bore diameter housingDb min | — | 26.063 in | — |
| Maximum distance sleevedb max | — | 507 mm | — |
| Maximum distance sleevedb max | — | 19.961 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 370.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 123.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 650 mm |
| T | — | — | 103 mm |
| R(Min.) | — | — | 5 mm |
| Basic Load Ratings Ca | — | — | 2880 kN |
| Bore Diameter (D) | — | 480 mm | — |
| Basic Load Ratings C0A | — | — | 11600 kN |
| Outside Diameter (D) | — | 650 mm | — |
| Fatigue Load Limit : Cu | — | — | 531 kN |
| Height (T) | — | 103 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 500 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 2,650,000 N | — |
| D1 | — | — | 556 mm |
| Basic Static Load Rating, Axial (C0A) | — | 13,700,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 33 mm |
| Limiting Speed (Ng) | — | 920 1/min | — |
| B1 | — | — | 99 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 55 mm |
| Reference Speed (Nϑr) | — | 520 1/min | — |
| A | — | — | 259 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 662 mm | — |
| Da(Min.) | — | — | 555 mm |
| Bore Diameter Housing Washer (D1) | — | 556 mm | — |
| Da(Max.) | — | — | 595 mm |
| Height Of Shaft Washer (T2) | — | 37 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Height Of The Housing Washer (T1) | — | 55 mm | — |
| Mass(Refer.) | — | — | 89.0 kg |
| Rip Diameter Shaft Washer (D1) | — | 620 mm | — |
| Height Of The Shaft Washer (T3) | — | 62 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 565 mm | — |
| Distance Of The Center Point (A) | — | 259 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 99 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 603 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 507 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,330,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.