Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29292-E1-MB. This table explores the base group 29292; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29292” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29292460 × 620 × mm | FAG29292-E1-MB460 × 620 × 95 mm | KOYO29292460 × 620 × 30 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29292 | 29292-E1-MB | 29292 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29292 | — |
| Bore diameterd | 460 mm | 460 mm | 460 mm |
| Outside diameterD | 620 mm | 620 mm | 620 mm |
| WidthB | — | 95 mm | 30 mm |
| HeightH | 95 mm | — | — |
| Basic dynamic load ratingC | 2070 kN | — | — |
| Basic static load ratingC0 | 10600 kN | — | — |
| Fatigue load limitPu | 865 kN | — | 440 kN |
| Reference speednref | 600 r/min | 540 r/min | — |
| Limiting speednG | 950 r/min | 970 r/min | 550 r/min |
| Mass≈m | 81 kg | 77.98 kg | 81 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 530 mm | — |
| Bore diameter housing washerD1 | — | 20.866 in | — |
| Rip diameter shaft washerd1 | — | 585 mm | — |
| Rip diameter shaft washerd1 | — | 23.031 in | — |
| Minimum chamfer dimensionrmin | — | 5 mm | — |
| Minimum chamfer dimensionrmin | — | 0.197 in | — |
| Height of the housing washerT1 | — | 46 mm | — |
| Height of the housing washerT1 | — | 1.811 in | — |
| Height of shaft washerT2 | — | 34 mm | — |
| Height of shaft washerT2 | — | 1.339 in | — |
| Height of the shaft washerT3 | — | 59 mm | — |
| Height of the shaft washerT3 | — | 2.323 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 91 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 3.583 in | — |
| Distance of the center pointA | — | 245 mm | — |
| Distance of the center pointA | — | 9.646 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 540 mm | — | — |
| Diameter of housing abutmentD a | max. 565 mm | — | — |
| Fillet radiusr a | max. 4 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 11 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 605 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 530 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 30 mm | — | — |
| Height shaft washer + cageB 1 | 91 mm | — | — |
| Height housing washerC | 46 mm | — | — |
| Distance from shaft washer end side face to pressure points | 245 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — | — |
| Logistics | |||
| Product net weight | 81.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 95 mm | — |
| Section heightT | — | 3.74 in | — |
| Basic dynamic load rating, axialCa | — | 2,550,000 N | — |
| Basic dynamic load rating, axialCa | — | 573,291.367 lbf | — |
| Basic static load rating, axialC0a | — | 12,200,000 N | — |
| Basic static load rating, axialC0a | — | 2,742,805.755 lbf | — |
| Fatigue load limit, axialCua | — | 1,240,000 N | — |
| Fatigue load limit, axialCua | — | 278,776.978 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396494 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29292 | — |
| Old Designation | — | ["29292E1MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0389995870000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29292-E1-MB | — |
| Mounting Manager ID | — | 29292-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 535 mm | — |
| Minimum diameter shaft shoulderda min | — | 21.063 in | — |
| Maximum diameter of housing shoulderDa max | — | 575 mm | — |
| Maximum diameter of housing shoulderDa max | — | 22.638 in | — |
| Minimum bore diameter housingDb min | — | 632 mm | — |
| Minimum bore diameter housingDb min | — | 24.882 in | — |
| Maximum distance sleevedb max | — | 479 mm | — |
| Maximum distance sleevedb max | — | 18.858 in | — |
| Maximum recess radiusra max | — | 4 mm | — |
| Maximum recess radiusra max | — | 0.157 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 300.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 99.6 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 620 mm |
| T | — | — | 95 mm |
| R(Min.) | — | — | 5 mm |
| Basic Load Ratings Ca | — | — | 2460 kN |
| Bore Diameter (D) | — | 460 mm | — |
| Basic Load Ratings C0A | — | — | 9620 kN |
| Outside Diameter (D) | — | 620 mm | — |
| Fatigue Load Limit : Cu | — | — | 440 kN |
| Height (T) | — | 95 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 550 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 2,550,000 N | — |
| D1 | — | — | 530 mm |
| Basic Static Load Rating, Axial (C0A) | — | 12,200,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 30 mm |
| Limiting Speed (Ng) | — | 970 1/min | — |
| B1 | — | — | 91 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 46 mm |
| Reference Speed (Nϑr) | — | 540 1/min | — |
| A | — | — | 245 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 632 mm | — |
| Da(Min.) | — | — | 530 mm |
| Bore Diameter Housing Washer (D1) | — | 530 mm | — |
| Da(Max.) | — | — | 570 mm |
| Height Of Shaft Washer (T2) | — | 34 mm | — |
| Ra(Max.) | — | — | 4 mm |
| Height Of The Housing Washer (T1) | — | 46 mm | — |
| Mass(Refer.) | — | — | 81.0 kg |
| Rip Diameter Shaft Washer (D1) | — | 585 mm | — |
| Height Of The Shaft Washer (T3) | — | 59 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 535 mm | — |
| Distance Of The Center Point (A) | — | 245 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 91 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 575 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 479 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 4 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 1,240,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.