Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29264” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29264320 × 440 × mm | FAG29264-E1-MB320 × 440 × 73 mm | KOYO29264R320 × 440 × 21 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29264 | 29264-E1-MB | 29264R |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29264 | — |
| Bore diameterd | 320 mm | 320 mm | 320 mm |
| Outside diameterD | 440 mm | 440 mm | 440 mm |
| WidthB | — | 73 mm | 21 mm |
| HeightH | 73 mm | — | — |
| Basic dynamic load ratingC | 1110 kN | — | — |
| Basic static load ratingC0 | 5100 kN | — | — |
| Fatigue load limitPu | 465 kN | — | 321 kN |
| Reference speednref | 850 r/min | 780 r/min | — |
| Limiting speednG | 1400 r/min | 1420 r/min | 900 r/min |
| Mass≈m | 33.5 kg | 31.52 kg | 32.7 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 372 mm | — |
| Bore diameter housing washerD1 | — | 14.646 in | — |
| Rip diameter shaft washerd1 | — | 415 mm | — |
| Rip diameter shaft washerd1 | — | 16.339 in | — |
| Minimum chamfer dimensionrmin | — | 3 mm | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — |
| Height of the housing washerT1 | — | 38 mm | — |
| Height of the housing washerT1 | — | 1.496 in | — |
| Height of shaft washerT2 | — | 26 mm | — |
| Height of shaft washerT2 | — | 1.024 in | — |
| Height of the shaft washerT3 | — | 44.5 mm | — |
| Height of the shaft washerT3 | — | 1.752 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 69 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 2.717 in | — |
| Distance of the center pointA | — | 172 mm | — |
| Distance of the center pointA | — | 6.772 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 380 mm | — | — |
| Diameter of housing abutmentD a | max. 400 mm | — | — |
| Fillet radiusr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 2.5 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 430 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 372 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 21 mm | — | — |
| Height shaft washer + cageB 1 | 69 mm | — | — |
| Height housing washerC | 38 mm | — | — |
| Distance from shaft washer end side face to pressure points | 172 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 3 mm | — | — |
| Logistics | |||
| Product net weight | 33.5 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 73 mm | — |
| Section heightT | — | 2.874 in | — |
| Basic dynamic load rating, axialCa | — | 1,410,000 N | — |
| Basic dynamic load rating, axialCa | — | 316,996.403 lbf | — |
| Basic static load rating, axialC0a | — | 6,500,000 N | — |
| Basic static load rating, axialC0a | — | 1,461,330.935 lbf | — |
| Fatigue load limit, axialCua | — | 690,000 N | — |
| Fatigue load limit, axialCua | — | 155,125.899 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396479 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29264 | — |
| Old Designation | — | ["29264E1MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0389995010000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29264-E1-MB | — |
| Mounting Manager ID | — | 29264-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 380 mm | — |
| Minimum diameter shaft shoulderda min | — | 14.961 in | — |
| Maximum diameter of housing shoulderDa max | — | 406 mm | — |
| Maximum diameter of housing shoulderDa max | — | 15.984 in | — |
| Minimum bore diameter housingDb min | — | 450 mm | — |
| Minimum bore diameter housingDb min | — | 17.717 in | — |
| Maximum distance sleevedb max | — | 336 mm | — |
| Maximum distance sleevedb max | — | 13.228 in | — |
| Maximum recess radiusra max | — | 2.5 mm | — |
| Maximum recess radiusra max | — | 0.098 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 124.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 41.2 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 440 mm |
| T | — | — | 73 mm |
| R(Min.) | — | — | 3 mm |
| Basic Load Ratings Ca | — | — | 1780 kN |
| Bore Diameter (D) | — | 320 mm | — |
| Basic Load Ratings C0A | — | — | 6480 kN |
| Outside Diameter (D) | — | 440 mm | — |
| Fatigue Load Limit : Cu | — | — | 321 kN |
| Height (T) | — | 73 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 900 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 1,410,000 N | — |
| D1 | — | — | 372 mm |
| Basic Static Load Rating, Axial (C0A) | — | 6,500,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 21 mm |
| Limiting Speed (Ng) | — | 1,420 1/min | — |
| B1 | — | — | 69 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 38 mm |
| Reference Speed (Nϑr) | — | 780 1/min | — |
| A | — | — | 172 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 450 mm | — |
| Da(Min.) | — | — | 375 mm |
| Bore Diameter Housing Washer (D1) | — | 372 mm | — |
| Da(Max.) | — | — | 400 mm |
| Height Of Shaft Washer (T2) | — | 26 mm | — |
| Ra(Max.) | — | — | 2.5 mm |
| Height Of The Housing Washer (T1) | — | 38 mm | — |
| Mass(Refer.) | — | — | 32.7 kg |
| Rip Diameter Shaft Washer (D1) | — | 415 mm | — |
| Height Of The Shaft Washer (T3) | — | 44.5 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 380 mm | — |
| Distance Of The Center Point (A) | — | 172 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 69 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 406 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 336 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 690,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.