Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29260” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29260300 × 420 × mm | FAG29260-E1-MB300 × 420 × 73 mm | KOYO29260300 × 420 × 21 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29260 | 29260-E1-MB | 29260 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29260 | — |
| Bore diameterd | 300 mm | 300 mm | 300 mm |
| Outside diameterD | 420 mm | 420 mm | 420 mm |
| WidthB | — | 73 mm | 21 mm |
| HeightH | 73 mm | — | — |
| Basic dynamic load ratingC | 1070 kN | — | — |
| Basic static load ratingC0 | 4800 kN | — | — |
| Fatigue load limitPu | 465 kN | — | 302 kN |
| Reference speednref | 900 r/min | 840 r/min | — |
| Limiting speednG | 1400 r/min | 1500 r/min | 950 r/min |
| Mass≈m | 30.5 kg | 30.32 kg | 30.5 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 353 mm | — |
| Bore diameter housing washerD1 | — | 13.898 in | — |
| Rip diameter shaft washerd1 | — | 395 mm | — |
| Rip diameter shaft washerd1 | — | 15.551 in | — |
| Minimum chamfer dimensionrmin | — | 3 mm | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — |
| Height of the housing washerT1 | — | 38 mm | — |
| Height of the housing washerT1 | — | 1.496 in | — |
| Height of shaft washerT2 | — | 26 mm | — |
| Height of shaft washerT2 | — | 1.024 in | — |
| Height of the shaft washerT3 | — | 44 mm | — |
| Height of the shaft washerT3 | — | 1.732 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 69 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 2.717 in | — |
| Distance of the center pointA | — | 162 mm | — |
| Distance of the center pointA | — | 6.378 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 360 mm | — | — |
| Diameter of housing abutmentD a | max. 380 mm | — | — |
| Fillet radiusr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 2.2 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 405 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 353 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 21 mm | — | — |
| Height shaft washer + cageB 1 | 69 mm | — | — |
| Height housing washerC | 38 mm | — | — |
| Distance from shaft washer end side face to pressure points | 162 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 3 mm | — | — |
| Logistics | |||
| Product net weight | 30.5 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 73 mm | — |
| Section heightT | — | 2.874 in | — |
| Basic dynamic load rating, axialCa | — | 1,400,000 N | — |
| Basic dynamic load rating, axialCa | — | 314,748.201 lbf | — |
| Basic static load rating, axialC0a | — | 6,200,000 N | — |
| Basic static load rating, axialC0a | — | 1,393,884.892 lbf | — |
| Fatigue load limit, axialCua | — | 660,000 N | — |
| Fatigue load limit, axialCua | — | 148,381.295 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396477 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29260 | — |
| Old Designation | — | ["29260E1MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0389994980000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29260-E1-MB | — |
| Mounting Manager ID | — | 29260-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 360 mm | — |
| Minimum diameter shaft shoulderda min | — | 14.173 in | — |
| Maximum diameter of housing shoulderDa max | — | 386 mm | — |
| Maximum diameter of housing shoulderDa max | — | 15.197 in | — |
| Minimum bore diameter housingDb min | — | 426 mm | — |
| Minimum bore diameter housingDb min | — | 16.772 in | — |
| Maximum distance sleevedb max | — | 315 mm | — |
| Maximum distance sleevedb max | — | 12.402 in | — |
| Maximum recess radiusra max | — | 2.5 mm | — |
| Maximum recess radiusra max | — | 0.098 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 113.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 37.5 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 420 mm |
| T | — | — | 73 mm |
| R(Min.) | — | — | 3 mm |
| Basic Load Ratings Ca | — | — | 1330 kN |
| Bore Diameter (D) | — | 300 mm | — |
| Basic Load Ratings C0A | — | — | 4880 kN |
| Outside Diameter (D) | — | 420 mm | — |
| Fatigue Load Limit : Cu | — | — | 302 kN |
| Height (T) | — | 73 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 950 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 1,400,000 N | — |
| D1 | — | — | 353 mm |
| Basic Static Load Rating, Axial (C0A) | — | 6,200,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 21 mm |
| Limiting Speed (Ng) | — | 1,500 1/min | — |
| B1 | — | — | 69 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 38 mm |
| Reference Speed (Nϑr) | — | 840 1/min | — |
| A | — | — | 162 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 426 mm | — |
| Da(Min.) | — | — | 355 mm |
| Bore Diameter Housing Washer (D1) | — | 353 mm | — |
| Da(Max.) | — | — | 380 mm |
| Height Of Shaft Washer (T2) | — | 26 mm | — |
| Ra(Max.) | — | — | 2.5 mm |
| Height Of The Housing Washer (T1) | — | 38 mm | — |
| Mass(Refer.) | — | — | 30.5 kg |
| Rip Diameter Shaft Washer (D1) | — | 395 mm | — |
| Height Of The Shaft Washer (T3) | — | 44 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 360 mm | — |
| Distance Of The Center Point (A) | — | 162 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 69 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 386 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 315 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 660,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.