Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29248” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29248240 × 340 × mm | FAG29248-E1-MB240 × 340 × 60 mm | KOYO29248240 × 340 × 19 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29248 | 29248-E1-MB | 29248 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29248 | — |
| Bore diameterd | 240 mm | 240 mm | 240 mm |
| Outside diameterD | 340 mm | 340 mm | 340 mm |
| WidthB | — | 60 mm | 19 mm |
| HeightH | 60 mm | — | — |
| Basic dynamic load ratingC | 799 kN | — | — |
| Basic static load ratingC0 | 3450 kN | — | — |
| Fatigue load limitPu | 335 kN | — | 233 kN |
| Reference speednref | 1100 r/min | 1060 r/min | — |
| Limiting speednG | 1800 r/min | 1890 r/min | 1250 r/min |
| Mass≈m | 17.1 kg | 16.913 kg | 16.7 kg |
| Cage | Machined brass | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 283 mm | — |
| Bore diameter housing washerD1 | — | 11.142 in | — |
| Rip diameter shaft washerd1 | — | 320 mm | — |
| Rip diameter shaft washerd1 | — | 12.598 in | — |
| Minimum chamfer dimensionrmin | — | 2.1 mm | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — |
| Height of the housing washerT1 | — | 30 mm | — |
| Height of the housing washerT1 | — | 1.181 in | — |
| Height of shaft washerT2 | — | 22 mm | — |
| Height of shaft washerT2 | — | 0.866 in | — |
| Height of the shaft washerT3 | — | 37 mm | — |
| Height of the shaft washerT3 | — | 1.457 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 57 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 2.244 in | — |
| Distance of the center pointA | — | 130 mm | — |
| Distance of the center pointA | — | 5.118 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 290 mm | — | — |
| Diameter of housing abutmentD a | max. 308 mm | — | — |
| Fillet radiusr a | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 1.1 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 330 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 283 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 19 mm | — | — |
| Height shaft washer + cageB 1 | 57 mm | — | — |
| Height housing washerC | 30 mm | — | — |
| Distance from shaft washer end side face to pressure points | 130 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 2.1 mm | — | — |
| Logistics | |||
| Product net weight | 17.1 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 60 mm | — |
| Section heightT | — | 2.362 in | — |
| Basic dynamic load rating, axialCa | — | 1,010,000 N | — |
| Basic dynamic load rating, axialCa | — | 227,068.345 lbf | — |
| Basic static load rating, axialC0a | — | 4,150,000 N | — |
| Basic static load rating, axialC0a | — | 933,003.597 lbf | — |
| Fatigue load limit, axialCua | — | 470,000 N | — |
| Fatigue load limit, axialCua | — | 105,665.468 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396469 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29248 | — |
| Old Designation | — | ["29248E1MB"] | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0389994550000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29248-E1-MB | — |
| Mounting Manager ID | — | 29248-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 290 mm | — |
| Minimum diameter shaft shoulderda min | — | 11.417 in | — |
| Maximum diameter of housing shoulderDa max | — | 311 mm | — |
| Maximum diameter of housing shoulderDa max | — | 12.244 in | — |
| Minimum bore diameter housingDb min | — | 344 mm | — |
| Minimum bore diameter housingDb min | — | 13.543 in | — |
| Maximum distance sleevedb max | — | 250 mm | — |
| Maximum distance sleevedb max | — | 9.843 in | — |
| Maximum recess radiusra max | — | 2.1 mm | — |
| Maximum recess radiusra max | — | 0.083 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 63.3 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 21.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 340 mm |
| T | — | — | 60 mm |
| R(Min.) | — | — | 2.1 mm |
| Basic Load Ratings Ca | — | — | 1030 kN |
| Bore Diameter (D) | — | 240 mm | — |
| Basic Load Ratings C0A | — | — | 3670 kN |
| Outside Diameter (D) | — | 340 mm | — |
| Fatigue Load Limit : Cu | — | — | 233 kN |
| Height (T) | — | 60 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 1250 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 1,010,000 N | — |
| D1 | — | — | 283 mm |
| Basic Static Load Rating, Axial (C0A) | — | 4,150,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 19 mm |
| Limiting Speed (Ng) | — | 1,890 1/min | — |
| B1 | — | — | 57 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 30 mm |
| Reference Speed (Nϑr) | — | 1,060 1/min | — |
| A | — | — | 130 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 344 mm | — |
| Da(Min.) | — | — | 285 mm |
| Bore Diameter Housing Washer (D1) | — | 283 mm | — |
| Da(Max.) | — | — | 305 mm |
| Height Of Shaft Washer (T2) | — | 22 mm | — |
| Ra(Max.) | — | — | 2 mm |
| Height Of The Housing Washer (T1) | — | 30 mm | — |
| Mass(Refer.) | — | — | 16.7 kg |
| Rip Diameter Shaft Washer (D1) | — | 320 mm | — |
| Height Of The Shaft Washer (T3) | — | 37 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 290 mm | — |
| Distance Of The Center Point (A) | — | 130 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 57 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 311 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 250 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.1 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 470,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.