Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29244” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29244 E220 × 300 × mm | FAG29244-E1-MB220 × 300 × 48 mm | KOYO29244220 × 300 × 15 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29244 E | 29244-E1-MB | 29244 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29244 | — |
| Bore diameterd | 220 mm | 220 mm | 220 mm |
| Outside diameterD | 300 mm | 300 mm | 300 mm |
| WidthB | — | 48 mm | 15 mm |
| HeightH | 48 mm | — | — |
| Basic dynamic load ratingC | 690 kN | — | — |
| Basic static load ratingC0 | 3000 kN | — | — |
| Fatigue load limitPu | 310 kN | — | 148 kN |
| Reference speednref | 1300 r/min | 1160 r/min | — |
| Limiting speednG | 2200 r/min | 2170 r/min | 1550 r/min |
| Mass≈m | 9.24 kg | 9.5 kg | 10 kg |
| Cage | Sheet metal | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 251.5 mm | — |
| Bore diameter housing washerD1 | — | 9.902 in | — |
| Rip diameter shaft washerd1 | — | 285 mm | — |
| Rip diameter shaft washerd1 | — | 11.22 in | — |
| Minimum chamfer dimensionrmin | — | 2 mm | — |
| Minimum chamfer dimensionrmin | — | 0.079 in | — |
| Height of the housing washerT1 | — | 24.5 mm | — |
| Height of the housing washerT1 | — | 0.965 in | — |
| Height of shaft washerT2 | — | 17 mm | — |
| Height of shaft washerT2 | — | 0.669 in | — |
| Height of the shaft washerT3 | — | 30 mm | — |
| Height of the shaft washerT3 | — | 1.181 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 45 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 1.772 in | — |
| Distance of the center pointA | — | 117 mm | — |
| Distance of the center pointA | — | 4.606 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 255 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 224.5 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 227 mm | — | — |
| Length of spacer ringH a | min. 17 mm | — | — |
| Diameter of housing abutmentD a | max. 271 mm | — | — |
| Fillet radiusr a | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 0.86 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 280 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 252 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 30 mm | — | — |
| Height shaft washer + cageB 1 | 43.4 mm | — | — |
| Height housing washerC | 24.5 mm | — | — |
| Distance from shaft washer end side face to pressure points | 117 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 2 mm | — | — |
| Logistics | |||
| Product net weight | 9.24 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 48 mm | — |
| Section heightT | — | 1.89 in | — |
| Basic dynamic load rating, axialCa | — | 690,000 N | — |
| Basic dynamic load rating, axialCa | — | 155,125.899 lbf | — |
| Basic static load rating, axialC0a | — | 3,000,000 N | — |
| Basic static load rating, axialC0a | — | 674,460.432 lbf | — |
| Fatigue load limit, axialCua | — | 355,000 N | — |
| Fatigue load limit, axialCua | — | 79,811.151 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396467 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29244 | — |
| Old Designation | — | ["29244E1MB"] | — |
| Gpsd Group | — | F02 | — |
| Product Line Id | — | 37 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0389994470000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29244-E1-MB | — |
| Mounting Manager ID | — | 29244-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 260 mm | — |
| Minimum diameter shaft shoulderda min | — | 10.236 in | — |
| Maximum diameter of housing shoulderDa max | — | 277 mm | — |
| Maximum diameter of housing shoulderDa max | — | 10.906 in | — |
| Minimum bore diameter housingDb min | — | 304 mm | — |
| Minimum bore diameter housingDb min | — | 11.969 in | — |
| Maximum distance sleevedb max | — | 229 mm | — |
| Maximum distance sleevedb max | — | 9.016 in | — |
| Maximum recess radiusra max | — | 2 mm | — |
| Maximum recess radiusra max | — | 0.079 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 34.2 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 11.4 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 300 mm |
| T | — | — | 48 mm |
| R(Min.) | — | — | 2 mm |
| Basic Load Ratings Ca | — | — | 670 kN |
| Bore Diameter (D) | — | 220 mm | — |
| Basic Load Ratings C0A | — | — | 2340 kN |
| Outside Diameter (D) | — | 300 mm | — |
| Fatigue Load Limit : Cu | — | — | 148 kN |
| Height (T) | — | 48 mm | — |
| Limiting Speeds(Oil Lub.) | — | — | 1550 min-1 |
| Basic Dynamic Load Rating, Axial (Ca) | — | 690,000 N | — |
| D1 | — | — | 254 mm |
| Basic Static Load Rating, Axial (C0A) | — | 3,000,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| B | — | — | 15 mm |
| Limiting Speed (Ng) | — | 2,170 1/min | — |
| B1 | — | — | 45 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| C | — | — | 24 mm |
| Reference Speed (Nϑr) | — | 1,160 1/min | — |
| A | — | — | 117 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 304 mm | — |
| Da(Min.) | — | — | 260 mm |
| Bore Diameter Housing Washer (D1) | — | 251.5 mm | — |
| Da(Max.) | — | — | 275 mm |
| Height Of Shaft Washer (T2) | — | 17 mm | — |
| Ra(Max.) | — | — | 2 mm |
| Height Of The Housing Washer (T1) | — | 24.5 mm | — |
| Mass(Refer.) | — | — | 10.0 kg |
| Rip Diameter Shaft Washer (D1) | — | 285 mm | — |
| Height Of The Shaft Washer (T3) | — | 30 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 260 mm | — |
| Distance Of The Center Point (A) | — | 117 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 45 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 277 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 229 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 355,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.