Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 29236-E1-MB. This table explores the base group 29236; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“29236” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29236 E180 × 250 × mm | FAG29236-E1-MB180 × 250 × 42 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 29236 E | 29236-E1-MB |
| Product family | Spherical roller thrust bearings | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings |
| Series | — | 29236 |
| Bore diameterd | 180 mm | 180 mm |
| Outside diameterD | 250 mm | 250 mm |
| WidthB | — | 42 mm |
| HeightH | 42 mm | — |
| Basic dynamic load ratingC | 495 kN | — |
| Basic static load ratingC0 | 2040 kN | — |
| Fatigue load limitPu | 212 kN | — |
| Reference speednref | 1600 r/min | 1350 r/min |
| Limiting speednG | 2600 r/min | 2650 r/min |
| Mass≈m | 5.83 kg | 6.187 kg |
| Cage | Sheet metal | MB — Solid brass cage |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Bore diameter housing washerD1 | — | 208 mm |
| Bore diameter housing washerD1 | — | 8.189 in |
| Rip diameter shaft washerd1 | — | 235 mm |
| Rip diameter shaft washerd1 | — | 9.252 in |
| Minimum chamfer dimensionrmin | — | 1.5 mm |
| Minimum chamfer dimensionrmin | — | 0.059 in |
| Height of the housing washerT1 | — | 22 mm |
| Height of the housing washerT1 | — | 0.866 in |
| Height of shaft washerT2 | — | 15 mm |
| Height of shaft washerT2 | — | 0.591 in |
| Height of the shaft washerT3 | — | 26 mm |
| Height of the shaft washerT3 | — | 1.024 in |
| Height of shaft washer, inc. lip ringT4 | — | 40 mm |
| Height of shaft washer, inc. lip ringT4 | — | 1.575 in |
| Distance of the center pointA | — | 97 mm |
| Distance of the center pointA | — | 3.819 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 210 mm | — |
| Abutment diameter of spacer ringd b1 | max. 187 mm | — |
| Outside diameter of spacer ringd b2 | max. 187 mm | — |
| Length of spacer ringH a | min. 14 mm | — |
| Diameter of housing abutmentD a | max. 226 mm | — |
| Fillet radiusr a | max. 1.5 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 0.4 | — |
| Engineering — Dimensions | ||
| Outside diameter of shaft washer end side faced 1 | ≈ 234 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 208 mm | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 26 mm | — |
| Height shaft washer + cageB 1 | 36.9 mm | — |
| Height housing washerC | 22 mm | — |
| Distance from shaft washer end side face to pressure points | 97 mm | — |
| Chamfer dimension shaft washerr 1,2 | min. 1.5 mm | — |
| Logistics | ||
| Product net weight | 5.83 kg | — |
| eClass code | 23-05-11-03 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Section heightT | — | 42 mm |
| Section heightT | — | 1.654 in |
| Basic dynamic load rating, axialCa | — | 485,000 N |
| Basic dynamic load rating, axialCa | — | 109,037.77 lbf |
| Basic static load rating, axialC0a | — | 2,070,000 N |
| Basic static load rating, axialC0a | — | 465,377.698 lbf |
| Fatigue load limit, axialCua | — | 255,000 N |
| Fatigue load limit, axialCua | — | 57,329.137 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 396461 |
| Base Type | — | 29236 |
| Old Designation | — | ["29236E1MB"] |
| Gpsd Group | — | F02 |
| Product Line Id | — | 37 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0389994120000 |
| Base product | — | 2305110301 |
| Bearing X designation | — | 29236-E1-MB |
| Mounting Manager ID | — | 29236-E1-MB |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 215 mm |
| Minimum diameter shaft shoulderda min | — | 8.465 in |
| Maximum diameter of housing shoulderDa max | — | 226 mm |
| Maximum diameter of housing shoulderDa max | — | 8.898 in |
| Minimum bore diameter housingDb min | — | 254 mm |
| Minimum bore diameter housingDb min | — | 10 in |
| Maximum distance sleevedb max | — | 190 mm |
| Maximum distance sleevedb max | — | 7.48 in |
| Maximum recess radiusra max | — | 1.5 mm |
| Maximum recess radiusra max | — | 0.059 in |
| Product characteristics | ||
| Heat treatment | — | Standard |
| Locating feature, housing washer | None | Without |
| Handling thread holes | — | Without |
| Constricted width and inclination variation | — | Standard |
| Test certificate | — | Without |
| Product identity | ||
| Official product category | Spherical roller thrust bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — |
| Structure group ID | BHS_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring |
| Short Description | — | Axial spherical roller bearing |
| Properties | ||
| Bore type | Cylindrical | — |
| Tolerance class | Normal | — |
| Indicative carbon footprint for new product | 21.6 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 180 mm |
| Outside Diameter (D) | — | 250 mm |
| Height (T) | — | 42 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 485,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 2,070,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 2,650 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 1,350 1/min |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 254 mm |
| Bore Diameter Housing Washer (D1) | — | 208 mm |
| Height Of Shaft Washer (T2) | — | 15 mm |
| Height Of The Housing Washer (T1) | — | 22 mm |
| Rip Diameter Shaft Washer (D1) | — | 235 mm |
| Height Of The Shaft Washer (T3) | — | 26 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 215 mm |
| Distance Of The Center Point (A) | — | 97 mm |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 40 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 226 mm |
| Maximum Distance Sleeve (Db Max) | — | 190 mm |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm |
| Maximum Fillet Radius (Ra Max) | — | 1.5 mm |
| Fatigue Load Limit, Axial (Cua) | — | 255,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.