Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“292” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF292/500500 × 670 × mm | FAG292/500-E1-MB500 × 670 × 103 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 292/500 | 292/500-E1-MB |
| Product family | Spherical roller thrust bearings | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings |
| Series | — | 292/500 |
| Bore diameterd | 500 mm | 500 mm |
| Outside diameterD | 670 mm | 670 mm |
| WidthB | — | 103 mm |
| HeightH | 103 mm | — |
| Basic dynamic load ratingC | 2390 kN | — |
| Basic static load ratingC0 | 12500 kN | — |
| Fatigue load limitPu | 1000 kN | — |
| Reference speednref | 560 r/min | 495 r/min |
| Limiting speednG | 900 r/min | 890 r/min |
| Mass≈m | 102 kg | 100 kg |
| Cage | Machined brass | MB — Solid brass cage |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Bore diameter housing washerD1 | — | 574 mm |
| Bore diameter housing washerD1 | — | 22.598 in |
| Rip diameter shaft washerd1 | — | 640 mm |
| Rip diameter shaft washerd1 | — | 25.197 in |
| Minimum chamfer dimensionrmin | — | 5 mm |
| Minimum chamfer dimensionrmin | — | 0.197 in |
| Height of the housing washerT1 | — | 55 mm |
| Height of the housing washerT1 | — | 2.165 in |
| Height of shaft washerT2 | — | 37 mm |
| Height of shaft washerT2 | — | 1.457 in |
| Height of the shaft washerT3 | — | 65 mm |
| Height of the shaft washerT3 | — | 2.559 in |
| Height of shaft washer, inc. lip ringT4 | — | 99 mm |
| Height of shaft washer, inc. lip ringT4 | — | 3.898 in |
| Distance of the center pointA | — | 268 mm |
| Distance of the center pointA | — | 10.551 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 585 mm | — |
| Diameter of housing abutmentD a | max. 615 mm | — |
| Fillet radiusr a | max. 4 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 15 | — |
| Engineering — Dimensions | ||
| Outside diameter of shaft washer end side faced 1 | ≈ 654 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 574 mm | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 33 mm | — |
| Height shaft washer + cageB 1 | 99 mm | — |
| Height housing washerC | 53.5 mm | — |
| Distance from shaft washer end side face to pressure points | 268 mm | — |
| Chamfer dimension shaft washerr 1,2 | min. 5 mm | — |
| Logistics | ||
| Product net weight | 102.0 kg | — |
| eClass code | 23-05-09-11 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Section heightT | — | 103 mm |
| Section heightT | — | 4.055 in |
| Basic dynamic load rating, axialCa | — | 2,750,000 N |
| Basic dynamic load rating, axialCa | — | 618,255.396 lbf |
| Basic static load rating, axialC0a | — | 14,700,000 N |
| Basic static load rating, axialC0a | — | 3,304,856.115 lbf |
| Fatigue load limit, axialCua | — | 1,400,000 N |
| Fatigue load limit, axialCua | — | 314,748.201 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 396433 |
| Base Type | — | 292/500 |
| Old Designation | — | ["292/500E1MB"] |
| Gpsd Group | — | F03 |
| Product Line Id | — | 78 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0389993070000 |
| Base product | — | 2305110301 |
| Bearing X designation | — | 292/500-E1-MB |
| Mounting Manager ID | — | 292/500-E1-MB |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 585 mm |
| Minimum diameter shaft shoulderda min | — | 23.031 in |
| Maximum diameter of housing shoulderDa max | — | 622 mm |
| Maximum diameter of housing shoulderDa max | — | 24.488 in |
| Minimum bore diameter housingDb min | — | 682 mm |
| Minimum bore diameter housingDb min | — | 26.85 in |
| Maximum distance sleevedb max | — | 524 mm |
| Maximum distance sleevedb max | — | 20.63 in |
| Maximum recess radiusra max | — | 4 mm |
| Maximum recess radiusra max | — | 0.157 in |
| Product characteristics | ||
| Heat treatment | — | Standard |
| Locating feature, housing washer | None | Without |
| Handling thread holes | — | Without |
| Constricted width and inclination variation | — | Standard |
| Test certificate | — | Without |
| Product identity | ||
| Official product category | Spherical roller thrust bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — |
| Structure group ID | BHS_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring |
| Short Description | — | Axial spherical roller bearing |
| Properties | ||
| Bore type | Cylindrical | — |
| Tolerance class | Normal | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 377.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 125.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 500 mm |
| Outside Diameter (D) | — | 670 mm |
| Height (T) | — | 103 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 2,750,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 14,700,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 890 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 495 1/min |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 682 mm |
| Bore Diameter Housing Washer (D1) | — | 574 mm |
| Height Of Shaft Washer (T2) | — | 37 mm |
| Height Of The Housing Washer (T1) | — | 55 mm |
| Rip Diameter Shaft Washer (D1) | — | 640 mm |
| Height Of The Shaft Washer (T3) | — | 65 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 585 mm |
| Distance Of The Center Point (A) | — | 268 mm |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 99 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 622 mm |
| Maximum Distance Sleeve (Db Max) | — | 524 mm |
| Minimum Chamfer Dimension (Rmin) | — | 5 mm |
| Maximum Fillet Radius (Ra Max) | — | 4 mm |
| Fatigue Load Limit, Axial (Cua) | — | 1,400,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.