Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“249” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF249/750 CA/W33750 × 1000 × 250 mm | FAG249/750-B-MB750 × 1000 × 250 mm | TIMKEN249/750YMBW33W45AC3750 × 1000 × 250 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | 249/750 CA/W33 | 249/750-B-MB | 249/750YMBW33W45AC3 |
| Product family | Spherical roller bearings | — | Radial SRB |
| Detailed type | Spherical roller bearing with relubrication features | Spherical roller bearings | Spherical roller bearings |
| Series | — | 249/750 | NSS-630833 |
| Bore diameterd | 750 mm | 750 mm | 750 mm |
| Outside diameterD | 1000 mm | 1000 mm | 1000 mm |
| WidthB | 250 mm | 250 mm | 250 mm |
| Basic dynamic load ratingC | 7699 kN | 7200 kN | 7030 kN |
| Basic static load ratingC0 | 18000 kN | 18900 kN | 17000 kN |
| Fatigue load limitPu | 1100 kN | 1200 kN | — |
| Reference speednref | 260 r/min | 143 r/min | — |
| Limiting speednG | 480 r/min | 510 r/min | — |
| Mass≈m | 560 kg | 553.8 kg | 541.89 kg |
| Precision class | Normal | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | — | Open |
| Cage | Machined brass | MB — Solid brass cage | Brass cage |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 3.31 |
| Y2 Factor | — | — | 4.92 |
| Y0 Factor | — | — | 3.23 |
| E Factor | — | — | 0.20 |
| Cg Factor | — | — | 0.1306 |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.22 | — |
| Dynamic axial load factorY1 | — | 3.1 | — |
| Dynamic axial load factorY2 | — | 4.62 | — |
| Static axial load factorY0 | — | 3.03 | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Bore diameter outer ringD1 | — | 921.7 mm | — |
| Bore diameter outer ringD1 | — | 36.287 in | — |
| Diameter lubrication holeds | — | 12.5 mm | — |
| Diameter lubrication holeds | — | 0.492 in | — |
| Width of lubricating groovens | — | 23.5 mm | — |
| Width of lubricating groovens | — | 0.925 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 773 mm | — | — |
| Diameter of housing abutmentD a | max. 977 mm | — | — |
| Radius of filletr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| SKF performance class | SKF Explorer | — | — |
| Limiting valuee | 0.22 | — | — |
| Calculation factorY 1 | 3 | — | — |
| Calculation factorY 2 | 4.6 | — | — |
| Calculation factorY 0 | 2.8 | — | — |
| Engineering — Dimensions | |||
| Deviation limits of mid-range bore diametert Δdmp | -0.075 to 0 mm | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.1 to 0 mm | — | — |
| Deviation limits of ring widtht ΔBs | -0.75 to 0 mm | — | — |
| Shoulder diameter of inner ringd 2 | ≈ 830 mm | — | — |
| Shoulder/recess diameter of outer ringD 1 | ≈ 916 mm | — | — |
| Width of lubrication grooveb | 22.3 mm | — | — |
| Diameter of lubrication holeK | 12 mm | — | — |
| Chamfer dimensionr 1,2 | min. 6 mm | — | — |
| ISO tolerance class for dimensions | Normal | — | — |
| Engineering — Engineering specifications | |||
| Bore type | Cylindrical | — | — |
| Engineering — Radial internal clearance | |||
| Minimum initial clearance | 390 µm | — | — |
| Maximum initial clearance | 580 µm | — | — |
| Engineering — Tolerances of run-out | |||
| Range of section height at inner ring of assembled bearingt Kia | 80 µm | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 140 µm | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — |
| Logistics | |||
| Product net weight | 560.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171510 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 7,200,000 N | — |
| Basic dynamic load rating, radialCr | — | 1,618,705.036 lbf | — |
| Basic static load rating, radialC0r | — | 18,900,000 N | — |
| Basic static load rating, radialC0r | — | 4,249,100.719 lbf | — |
| Fatigue load limit, radialCur | — | 1,200,000 N | — |
| Fatigue load limit, radialCur | — | 269,784.173 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1537656 | — |
| Material Number | — | — | 000000000190051901 |
| Base Type | — | 249/750 | — |
| World Assembly Part Number | — | — | 249/750YMBW33W45A |
| Gpsd Group | — | F03 | — |
| Inner Ring Part Number | — | — | 750ASDY49 |
| Product Line Id | — | 78 | — |
| Outer Ring Part Number | — | — | 750ESDC49W33W45 |
| X Life Marking | — | n.r. | — |
| Drawing Number | — | — | M957220 |
| Upc | — | — | 0087796370791 |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:47.927 |
| SAP material number | — | 0850270300000 | — |
| Base product | — | 2305091131 | — |
| Bearing X designation | — | 249/750-B-MB | — |
| Mounting Manager ID | — | 249/750-B-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 773 mm | — |
| Minimum diameter shaft shoulderda min | — | 30.433 in | — |
| Maximum diameter of housing shoulderDa max | — | 977 mm | — |
| Maximum diameter of housing shoulderDa max | — | 38.465 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Product characteristics | |||
| DesignB | — | With fixed central rib | — |
| Bore typeZ | — | Cylindrical | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Relubrication feature | With | Standard | — |
| Product identity | |||
| Official product category | Spherical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — |
| Structure group ID | BS2_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Spherical roller bearing 249..-B-MB, symmetric 3 ribs | Spherical Roller Bearing | Imperial Series | 29.5276 in Bore | 39.3701 in OD | 9.8425 in Width | Open | Cylindrical Bore | Brass Cage | C3 Clearance | Bearing contains application features |
| Short Description | — | Spherical Roller Bearing | — |
| Type Description | — | — | Radial SRB |
| Number Of Rows | 2 | — | 2 |
| Tapered Bore | — | — | N |
| Properties | |||
| Locating feature, bearing outer ring | Without | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class for dimensions | Normal | — | — |
| Tolerance class for run-out | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 2072.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 689.0 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 750 mm | — |
| Outside Diamater (D) | — | 1,000 mm | — |
| Overall Width | — | — | 0.000 mm |
| Total Width (B) | — | 250 mm | — |
| Radial Rating | — | — | 7,030,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | — | 7,200,000 N | — |
| Axial Rating | — | — | 0 N |
| Basic Static Load Rating, Radial (C0R) | — | 18,900,000 N | — |
| Dynamic Rating C1 | — | — | 7,030,000 N |
| Diameter Lubrication Hole (Ds) | — | 12.5 mm | — |
| Dynamic Rating C90 | — | — | 0 N |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | — | 773 mm | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| Static Radial Rating C0 | — | — | 17,000,000 N |
| Limiting Speed (Limiting Spe) | — | 510 1/min | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Reference Speed (Nϑr) | — | 143 1/min | — |
| Static Axial Rating C0A | — | — | 0 N |
| Maximum Recess Radius (Ra Max) | — | 5 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | — | 977 mm | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.22 | — |
| Width Of Lubricating Groove (Ns) | — | 23.5 mm | — |
| Dynamic Axial Load Factor (Y1) | — | 3.1 | — |
| Bore Diameter Outer Ring (D1) | — | 921.7 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Static Axial Load Factor (Y0) | — | 3.03 | — |
| Dynamic Axial Load Factor (Y2) | — | 4.62 | — |
| Fatigue Load Limit, Radial (Cur) | — | 1,200,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.