Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 24192-ECAK30-W33. This table explores the base group 24192; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“24192” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF24192 ECA/W33460 × 760 × 300 mm | FAG24192-BEA-XL-MB1460 × 760 × 300 mm | TIMKEN24192YMBW33460 × 760 × 300 mm | NSK24192CAME4460 × 760 × 300 mm | KOYO24192R460 × 760 × 300 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | 24192 ECA/W33 | 24192-BEA-XL-MB1 | 24192YMBW33 | 24192CAME4 | 24192R |
| Product family | Spherical roller bearings | — | Radial SRB | Spherical roller bearing | Spherical roller bearings |
| Detailed type | Spherical roller bearing with relubrication features | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings |
| Series | — | 24192 | EX27047 | — | — |
| Bore diameterd | 460 mm | 460 mm | 460 mm | 460 mm | 460 mm |
| Outside diameterD | 760 mm | 760 mm | 760 mm | 760 mm | 760 mm |
| WidthB | 300 mm | 300 mm | 300 mm | 300 mm | 300 mm |
| Basic dynamic load ratingC | 8608 kN | 8500 kN | 8200 kN | 6300 kN | 7320 kN |
| Basic static load ratingC0 | 14600 kN | 14500 kN | 14900 kN | 12400 kN | 12200 kN |
| Fatigue load limitPu | 980 kN | 1030 kN | — | — | 597 kN |
| Reference speednref | 280 r/min | 241 r/min | — | — | — |
| Limiting speednG | 430 r/min | 660 r/min | — | — | 310 r/min |
| Mass≈m | 536 kg | 534.5 kg | 544.86 kg | 512 kg | 550 kg |
| Precision class | Normal | — | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | CN | — |
| Sealing | Without | — | Open | — | — |
| Cage | Machined brass | MB1 — Solid brass cage | Brass cage | Machined brass | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 300 mm | — |
| Minimum bearing chamferr min. | — | — | — | 7.5 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 1.84 | — | — |
| Y2 Factor | — | — | 2.74 | — | — |
| Y0 Factor | — | — | 1.80 | — | — |
| E Factor | — | — | 0.37 | — | — |
| Cg Factor | — | — | 0.1001 | — | — |
| Calculation factors | |||||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.38 | — | — | — |
| Dynamic axial load factorY1 | — | 1.76 | — | — | — |
| Dynamic axial load factorY2 | — | 2.62 | — | — | — |
| Static axial load factorY0 | — | 1.72 | — | 1.7 | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Largebearing | — | Yes | — | — | — |
| Staticangularerrorandmisalignment | — | Yes | — | — | — |
| Dynamicangularerrorandmisalignment | — | Yes | — | — | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | — | — | — | Spherical roller bearings |
| Construction | |||||
| Bore construction | — | — | — | Cylindrical bore | — |
| Cage material and manufacture | — | — | — | Machined brass | — |
| Outer-ring lubrication features | — | — | — | E4: oil groove and oil holes | — |
| Internal clearance — catalogue omission rule | — | — | — | CN (normal), where no clearance suffix is specified | — |
| Precision — catalogue omission rule | — | — | — | ISO Normal, where no precision suffix is specified | — |
| Catalogue NSK HPS marking | — | — | — | No HPS asterisk in this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 7.5 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.295 in | — | — | — |
| Bore diameter outer ringD1 | — | 647.1 mm | — | — | — |
| Bore diameter outer ringD1 | — | 25.476 in | — | — | — |
| Diameter lubrication holeds | — | 12.5 mm | — | — | — |
| Diameter lubrication holeds | — | 0.492 in | — | — | — |
| Width of lubricating groovens | — | 23.5 mm | — | — | — |
| Width of lubricating groovens | — | 0.925 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of shaft abutmentd a | min. 492 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 728 mm | — | — | — | — |
| Radius of filletr a | max. 6 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Limiting valuee | 0.37 | — | — | — | — |
| Calculation factorY 1 | 1.8 | — | — | — | — |
| Calculation factorY 2 | 2.7 | — | — | — | — |
| Calculation factorY 0 | 1.8 | — | — | — | — |
| Engineering — Dimensions | |||||
| Deviation limits of mid-range bore diametert Δdmp | -0.045 to 0 mm | — | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.075 to 0 mm | — | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.45 to 0 mm | — | — | — | — |
| Shoulder diameter of inner ringd 2 | ≈ 543 mm | — | — | — | — |
| Shoulder/recess diameter of outer ringD 1 | ≈ 649 mm | — | — | — | — |
| Width of lubrication grooveb | 22.3 mm | — | — | — | — |
| Diameter of lubrication holeK | 12 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 7.5 mm | — | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — | — |
| Engineering — Engineering specifications | |||||
| Bore type | Cylindrical | — | — | — | — |
| Engineering — Radial internal clearance | |||||
| Minimum initial clearance | 260 µm | — | — | — | — |
| Maximum initial clearance | 410 µm | — | — | — | — |
| Engineering — Tolerances of run-out | |||||
| Range of section height at inner ring of assembled bearingt Kia | 65 µm | — | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 120 µm | — | — | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — | — | — |
| Equivalent-load factors | |||||
| Dynamic load ratio thresholde | — | — | — | 0.39 | — |
| Dynamic axial factor above thresholdY2 | — | — | — | 2.6 | — |
| Dynamic axial factor at or below thresholdY3 | — | — | — | 1.7 | — |
| Load ratings | |||||
| Basic dynamic radial load ratingCr | — | — | — | 6300000 N | — |
| Basic static radial load ratingC0r | — | — | — | 12400000 N | — |
| Logistics | |||||
| Product net weight | 536.0 kg | — | — | — | — |
| eClass code | 23-05-09-11 | — | — | — | — |
| UNSPSC code | 31171510 | — | — | — | — |
| Lubrication-qualified speed | |||||
| Thermal speed rating — oil bath | — | — | — | 280 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | — | 300 r/min | — |
| Limiting speed — oil bath | — | — | — | 400 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 8,500,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 1,910,971.223 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 14,500,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 3,259,892.086 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 1,030,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 231,564.748 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 392462 | — | — | — |
| Material Number | — | — | 000000000190033549 | — | — |
| Official Class Key | — | — | — | — | 060-010-000 |
| Base Type | — | 24192 | — | — | — |
| World Assembly Part Number | — | — | 24192YMBW33 | — | — |
| Gpsd Group | — | F03 | — | — | — |
| Inner Ring Part Number | — | — | 460ASDY41 | — | — |
| Product Line Id | — | 78 | — | — | — |
| Outer Ring Part Number | — | — | 460ESDC41W33 | — | — |
| X Life Marking | — | XL | — | — | — |
| Drawing Number | — | — | M944454 | — | — |
| Upc | — | — | 0053893215334 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.487 | — | — |
| SAP material number | — | 0925734870000 | — | — | — |
| Base product | — | 2305091122 | — | — | — |
| Bearing X designation | — | 24192-BEA-XL-MB1 | — | — | — |
| Mounting Manager ID | — | 24192-BEA-XL-MB1 | — | — | — |
| Grease application ID | — | 24192-BEA-XL-MB1 | — | — | — |
| Mounting dimensions | |||||
| Minimum shaft shoulder diameterda min. | — | — | — | 496 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | — | Not stated in this catalogue row | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 724 mm | — |
| Minimum housing shoulder diameterDa min. | — | — | — | 646 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 6 mm | — |
| Minimum diameter shaft shoulderda min | — | 492 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 19.37 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 728 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 28.661 in | — | — | — |
| Maximum recess radiusra max | — | 6 mm | — | — | — |
| Maximum recess radiusra max | — | 0.236 in | — | — | — |
| Product characteristics | |||||
| DesignBEA | — | With lose center lip ring | — | — | — |
| Bore typeZ | — | Cylindrical | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Relubrication feature | With | Standard | — | — | — |
| Product identity | |||||
| Official product category | Spherical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — | — | — |
| Structure group ID | BS2_001 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Construction | — | Spherical roller bearings 241..-BEA, main dimensions to DIN 635-2 | Spherical Roller Bearing | Imperial Series | 18.1102 in Bore | 29.9213 in OD | 11.8110 in Width | Open | Cylindrical Bore | Brass Cage | C0 Clearance | Bearing contains application features | — | — |
| Short Description | — | Spherical Roller Bearing | — | — | — |
| Type Description | — | — | Radial SRB | — | — |
| Number Of Rows | 2 | — | 2 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class for dimensions | Normal | — | — | — | — |
| Tolerance class for run-out | Normal | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 1983.0 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 659.0 kg CO 2 e | — | — | — | — |
| Reference mass | |||||
| Approximate catalogue mass | — | — | — | 512 kg | — |
| Technical Data | |||||
| d | — | — | — | — | 760 mm |
| B | — | — | — | — | 300 mm |
| R(Min.) | — | — | — | — | 7.5 mm |
| Bore Diameter (D) | — | 460 mm | — | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 7320 kN |
| Outside Diamater (D) | — | 760 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 12200 kN |
| Total Width (B) | — | 300 mm | — | — | — |
| Radial Rating | — | — | 8,200,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 597 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 8,500,000 N | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 310 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 14,500,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 8,200,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 410 min-1 |
| Diameter Lubrication Hole (Ds) | — | 12.5 mm | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Constant E | — | — | — | — | 0.35 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Axial Load Factors : Y1 | — | — | — | — | 1.95 |
| Minimum Diameter Shaft Shoulder (Da) | — | 492 mm | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Axial Load Factors : Y2 | — | — | — | — | 2.90 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — | — |
| Static Radial Rating C0 | — | — | 14,900,000 N | — | — |
| Axial Load Factors : Y0 | — | — | — | — | 1.91 |
| Limiting Speed (Limiting Spe) | — | 660 1/min | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| Da(Min.) | — | — | — | — | 496 mm |
| Reference Speed (Nϑr) | — | 241 1/min | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| Da(Max.) | — | — | — | — | 724 mm |
| Maximum Recess Radius (Ra Max) | — | 6 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 6 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 728 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 550 kg |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.38 | — | — | — |
| Width Of Lubricating Groove (Ns) | — | 23.5 mm | — | — | — |
| Dynamic Axial Load Factor (Y1) | — | 1.76 | — | — | — |
| Bore Diameter Outer Ring (D1) | — | 647.1 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 7.5 mm | — | — | — |
| Static Axial Load Factor (Y0) | — | 1.72 | — | — | — |
| Dynamic Axial Load Factor (Y2) | — | 2.62 | — | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 1,030,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.