Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“22360” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG22360-BEA-XL-MB1300 × 620 × 185 mm | KOYO22360R300 × 620 × 185 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 22360-BEA-XL-MB1 | 22360R |
| Product family | — | Spherical roller bearings |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 22360 | — |
| Bore diameterd | 300 mm | 300 mm |
| Outside diameterD | 620 mm | 620 mm |
| WidthB | 185 mm | 185 mm |
| Basic dynamic load ratingC | 4650 kN | 4890 kN |
| Basic static load ratingC0 | 6000 kN | 5430 kN |
| Fatigue load limitPu | 450 kN | 555 kN |
| Reference speednref | 610 r/min | — |
| Limiting speednG | 1190 r/min | 470 r/min |
| Mass≈m | 266.5 kg | 289 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | MB1 — Solid brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.31 | — |
| Dynamic axial load factorY1 | 2.21 | — |
| Dynamic axial load factorY2 | 3.29 | — |
| Static axial load factorY0 | 2.16 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Classification | ||
| Official Category Path | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | Spherical roller bearings |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 7.5 mm | — |
| Minimum chamfer dimensionrmin | 0.295 in | — |
| Bore diameter outer ringD1 | 530.3 mm | — |
| Bore diameter outer ringD1 | 20.878 in | — |
| Diameter lubrication holeds | 12.5 mm | — |
| Diameter lubrication holeds | 0.492 in | — |
| Width of lubricating groovens | 23.5 mm | — |
| Width of lubricating groovens | 0.925 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 4,650,000 N | — |
| Basic dynamic load rating, radialCr | 1,045,413.669 lbf | — |
| Basic static load rating, radialC0r | 6,000,000 N | — |
| Basic static load rating, radialC0r | 1,348,920.863 lbf | — |
| Fatigue load limit, radialCur | 450,000 N | — |
| Fatigue load limit, radialCur | 101,169.065 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1873482 | — |
| Official Class Key | — | 060-010-000 |
| Base Type | 22360 | — |
| Gpsd Group | F03 | — |
| Product Line Id | 78 | — |
| X Life Marking | XL | — |
| SAP material number | 0946645950000 | — |
| Base product | 2305091122 | — |
| Bearing X designation | 22360-BEA-XL-MB1 | — |
| Mounting Manager ID | 22360-BEA-XL-MB1 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 332 mm | — |
| Minimum diameter shaft shoulderda min | 13.071 in | — |
| Maximum diameter of housing shoulderDa max | 588 mm | — |
| Maximum diameter of housing shoulderDa max | 23.15 in | — |
| Maximum recess radiusra max | 6 mm | — |
| Maximum recess radiusra max | 0.236 in | — |
| Product characteristics | ||
| DesignBEA | With lose center lip ring | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Relubrication feature | Standard | — |
| Locating feature, bearing outer ring | Without | — |
| Handling thread holes | Without | — |
| Special material | Standard | — |
| Product Identity | ||
| Construction | Spherical roller bearing 223..-BEA-XL-MB1, symmetric 2 outer ribs with rib washer | — |
| Short Description | Spherical Roller Bearing | — |
| Technical Data | ||
| d | — | 620 mm |
| B | — | 185 mm |
| R(Min.) | — | 7.5 mm |
| Bore Diameter (D) | 300 mm | — |
| Basic Load Ratings : Cr | — | 4890 kN |
| Outside Diamater (D) | 620 mm | — |
| Basic Load Ratings : C0R | — | 5430 kN |
| Total Width (B) | 185 mm | — |
| Fatigue Load Limit : Cu | — | 555 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 4,650,000 N | — |
| Limiting Speeds(Grease Lub.) | — | 470 min-1 |
| Basic Static Load Rating, Radial (C0R) | 6,000,000 N | — |
| Limiting Speeds(Oil Lub.) | — | 630 min-1 |
| Diameter Lubrication Hole (Ds) | 12.5 mm | — |
| Constant E | — | 0.32 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Axial Load Factors : Y1 | — | 2.09 |
| Minimum Diameter Shaft Shoulder (Da) | 332 mm | — |
| Axial Load Factors : Y2 | — | 3.10 |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Axial Load Factors : Y0 | — | 2.04 |
| Limiting Speed (Limiting Spe) | 1,190 1/min | — |
| Da(Min.) | — | 336 mm |
| Reference Speed (Nϑr) | 610 1/min | — |
| Da(Max.) | — | 584 mm |
| Maximum Recess Radius (Ra Max) | 6 mm | — |
| Ra(Max.) | — | 6 mm |
| Maximum Diameter Of Housing Shoulder (Da) | 588 mm | — |
| Mass(Refer.) | — | 289 kg |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.31 | — |
| Width Of Lubricating Groove (Ns) | 23.5 mm | — |
| Dynamic Axial Load Factor (Y1) | 2.21 | — |
| Bore Diameter Outer Ring (D1) | 530.3 mm | — |
| Minimum Chamfer Dimension (Rmin) | 7.5 mm | — |
| Static Axial Load Factor (Y0) | 2.16 | — |
| Dynamic Axial Load Factor (Y2) | 3.29 | — |
| Fatigue Load Limit, Radial (Cur) | 450,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.