Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 22324EMW33W25C3. This table explores the base group 22324; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“22324” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF22324 CCK/C3120 × 260 × 86 mm | FAG22324-E1-XL120 × 260 × 86 mm | TIMKEN22324EJW33120 × 260 × 86 mm | NSK22324EAE4120 × 260 × 86 mm | KOYO22324RHR120 × 260 × 86 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | 22324 CCK/C3 | 22324-E1-XL | 22324EJW33 | 22324EAE4 | 22324RHR |
| Product family | Spherical roller bearings | — | Radial SRB | Spherical roller bearing | Spherical roller bearings |
| Detailed type | Spherical roller bearing with tapered bore | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings |
| Series | — | 22324 | EX26960 | — | — |
| Bore diameterd | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
| Outside diameterD | 260 mm | 260 mm | 260 mm | 260 mm | 260 mm |
| WidthB | 86 mm | 86 mm | 86 mm | 86 mm | 86 mm |
| Basic dynamic load ratingC | 1019 kN | 1080 kN | 1080 kN | 1190 kN | 1120 kN |
| Basic static load ratingC0 | 1120 kN | 1170 kN | 1210 kN | 1320 kN | 1130 kN |
| Fatigue load limitPu | — | 105 kN | — | — | 87.2 kN |
| Reference speednref | 2000 r/min | 2000 r/min | — | — | — |
| Limiting speednG | 2600 r/min | 2850 r/min | — | — | 1800 r/min |
| Mass≈m | 22 kg | 22.135 kg | 21.4 kg | 22.2 kg | 22.8 kg |
| Internal clearance | C3 | CN (Group N) — Normal internal clearance | — | CN | — |
| Sealing | Without | — | Open | — | — |
| Cage | Sheet metal | JPA — Sheet metal cage | Steel cage | Pressed steel | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 86 mm | — |
| Minimum bearing chamferr min. | — | — | — | 3 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 2.11 | — | — |
| Y2 Factor | — | — | 3.15 | — | — |
| Y0 Factor | — | — | 2.07 | — | — |
| E Factor | — | — | 0.32 | — | — |
| Cg Factor | — | — | 0.0823 | — | — |
| Calculation factors | |||||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.33 | — | — | — |
| Dynamic axial load factorY1 | — | 2.06 | — | — | — |
| Dynamic axial load factorY2 | — | 3.06 | — | — | — |
| Static axial load factorY0 | — | 2.01 | — | 1.9 | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Staticangularerrorandmisalignment | — | Yes | — | — | — |
| Dynamicangularerrorandmisalignment | — | Yes | — | — | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | — | — | — | Spherical roller bearings |
| Construction | |||||
| Bore construction | — | — | — | Cylindrical bore | — |
| Cage material and manufacture | — | — | — | Pressed steel | — |
| Outer-ring lubrication features | — | — | — | E4: oil groove and oil holes | — |
| Internal clearance — catalogue omission rule | — | — | — | CN (normal), where no clearance suffix is specified | — |
| Precision — catalogue omission rule | — | — | — | ISO Normal, where no precision suffix is specified | — |
| Catalogue NSK HPS marking | — | — | — | Marked with an asterisk (HPS) | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 3 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — | — |
| Bore diameter outer ringD1 | — | 222.4 mm | — | — | — |
| Bore diameter outer ringD1 | — | 8.756 in | — | — | — |
| Raceway diameter of the inner ringd2 | — | 150.8 mm | — | — | — |
| Raceway diameter of the inner ringd2 | — | 5.937 in | — | — | — |
| Diameter lubrication holeds | — | 8 mm | — | — | — |
| Diameter lubrication holeds | — | 0.315 in | — | — | — |
| Width of lubricating groovens | — | 15 mm | — | — | — |
| Width of lubricating groovens | — | 0.591 in | — | — | — |
| Equivalent-load factors | |||||
| Dynamic load ratio thresholde | — | — | — | 0.35 | — |
| Dynamic axial factor above thresholdY2 | — | — | — | 2.9 | — |
| Dynamic axial factor at or below thresholdY3 | — | — | — | 1.9 | — |
| Load ratings | |||||
| Basic dynamic radial load ratingCr | — | — | — | 1190000 N | — |
| Basic static radial load ratingC0r | — | — | — | 1320000 N | — |
| Logistics | |||||
| Product net weight | 22.0 kg | — | — | — | — |
| eClass code | 23-05-09-11 | — | — | — | — |
| UNSPSC code | 31171510 | — | — | — | — |
| Lubrication-qualified speed | |||||
| Thermal speed rating — oil bath | — | — | — | Not stated in this catalogue row | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 1400 r/min | — |
| Limiting speed — grease | — | — | — | 1100 r/min | — |
| Limiting speed — oil bath | — | — | — | 1400 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 1,080,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 242,805.755 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 1,170,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 263,039.568 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 105,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 23,606.115 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 388162 | — | — | — |
| Material Number | — | — | 000000000190087718 | — | — |
| Official Class Key | — | — | — | — | 060-010-000 |
| Base Type | — | 22324 | — | — | — |
| World Assembly Part Number | — | — | 22324EJW33_EJA | — | — |
| Old Designation | — | ["22324E1","22324-E1"] | — | — | — |
| Inner Ring Part Number | — | — | 120ASDC23 | — | — |
| Gpsd Group | — | F02 | — | — | — |
| Outer Ring Part Number | — | — | 120ESDC23W33 | — | — |
| Product Line Id | — | 37 | — | — | — |
| Drawing Number | — | — | M967334 | — | — |
| X Life Marking | — | XL | — | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.41 | — | — |
| SAP material number | — | 0190008630000 | — | — | — |
| Base product | — | 2305091103 | — | — | — |
| Bearing X designation | — | 22324-E1-XL | — | — | — |
| Mounting Manager ID | — | 22324-E1-XL | — | — | — |
| Grease application ID | — | 22324-E1-XL | — | — | — |
| Mounting dimensions | |||||
| Minimum shaft shoulder diameterda min. | — | — | — | 134 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | — | 157 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 246 mm | — |
| Minimum housing shoulder diameterDa min. | — | — | — | 222 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2.5 mm | — |
| Minimum diameter shaft shoulderda min | — | 134 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 5.276 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 246 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 9.685 in | — | — | — |
| Maximum recess radiusra max | — | 2.5 mm | — | — | — |
| Maximum recess radiusra max | — | 0.098 in | — | — | — |
| Performance | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Product characteristics | |||||
| DesignE1 | — | Without central rip | — | — | — |
| Bore typeZ | — | Cylindrical | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Relubrication feature | Without | Standard | — | — | — |
| Product identity | |||||
| Official product category | Spherical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — | — | — |
| Structure group ID | BS2_001 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Type Description | — | — | Radial SRB | — | — |
| Construction | — | Spherical roller bearings 223..-E1, main dimensions to DIN 635-2 | Spherical Roller Bearing | Imperial Series | 4.7244 in Bore | 10.2362 in OD | 3.3858 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | Bearing contains application features | — | — |
| Short Description | — | Spherical Roller Bearing | — | — | — |
| Number Of Rows | 2 | — | 2 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Bore type | Tapered 1:12 | — | — | — | — |
| Radial internal clearance | C3 | — | — | — | — |
| Tolerance class for dimensions | Normal | — | — | — | — |
| Tolerance class for run-out | P5 | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 81.4 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 27.0 kg CO 2 e | — | — | — | — |
| Reference mass | |||||
| Approximate catalogue mass | — | — | — | 22.2 kg | — |
| Technical Data | |||||
| d | — | — | — | — | 260 mm |
| B | — | — | — | — | 86 mm |
| R(Min.) | — | — | — | — | 3 mm |
| Basic Load Ratings : Cr | — | — | — | — | 1120 kN |
| Overall Width | — | — | 0.000 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 1130 kN |
| Bore Diameter (D) | — | 120 mm | — | — | — |
| Radial Rating | — | — | 1,080,000 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 87.2 kN |
| Outside Diamater (D) | — | 260 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1800 min-1 |
| Total Width (B) | — | 86 mm | — | — | — |
| Dynamic Rating C1 | — | — | 1,080,000 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 2500 min-1 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,080,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Constant E | — | — | — | — | 0.33 |
| Basic Static Load Rating, Radial (C0R) | — | 1,170,000 N | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Axial Load Factors : Y1 | — | — | — | — | 2.03 |
| Diameter Lubrication Hole (Ds) | — | 8 mm | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Axial Load Factors : Y2 | — | — | — | — | 3.02 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Static Radial Rating C0 | — | — | 1,210,000 N | — | — |
| Axial Load Factors : Y0 | — | — | — | — | 1.98 |
| Minimum Diameter Shaft Shoulder (Da) | — | 134 mm | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| Da(Min.) | — | — | — | — | 134 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| Da(Max.) | — | — | — | — | 246 mm |
| Limiting Speed (Limiting Spe) | — | 2,850 1/min | — | — | — |
| Ra(Max.) | — | — | — | — | 2.5 mm |
| Reference Speed (Nϑr) | — | 2,000 1/min | — | — | — |
| Mass(Refer.) | — | — | — | — | 22.8 kg |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da) | — | 246 mm | — | — | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.33 | — | — | — |
| Width Of Lubricating Groove (Ns) | — | 15 mm | — | — | — |
| Dynamic Axial Load Factor (Y1) | — | 2.06 | — | — | — |
| Bore Diameter Outer Ring (D1) | — | 222.4 mm | — | — | — |
| Raceway Diameter Of The Inner Ring (D2) | — | 150.8 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — | — |
| Static Axial Load Factor (Y0) | — | 2.01 | — | — | — |
| Dynamic Axial Load Factor (Y2) | — | 3.06 | — | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 105,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.