Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“22322” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF22322 E110 × 240 × 80 mm | FAG22322-E1-XL110 × 240 × 80 mm | TIMKEN22322EJW33110 × 240 × 80 mm | KOYO22322RHR110 × 240 × 80 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | 22322 E | 22322-E1-XL | 22322EJW33 | 22322RHR |
| Product family | Spherical roller bearings | — | Radial SRB | Spherical roller bearings |
| Detailed type | Spherical roller bearing with relubrication features | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings |
| Series | — | 22322 | EX26951 | — |
| Bore diameterd | 110 mm | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm | 240 mm |
| WidthB | 80 mm | 80 mm | 80 mm | 80 mm |
| Basic dynamic load ratingC | 989 kN | 950 kN | 949 kN | 1040 kN |
| Basic static load ratingC0 | 1120 kN | 1070 kN | 1050 kN | 1040 kN |
| Fatigue load limitPu | 100 kN | 93 kN | — | 77.7 kN |
| Reference speednref | 2000 r/min | 2130 r/min | — | — |
| Limiting speednG | 2800 r/min | 3000 r/min | — | 1900 r/min |
| Mass≈m | 17.7 kg | 17.713 kg | 17.15 kg | 18.1 kg |
| Precision class | Normal | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | — | Open | — |
| Cage | Sheet metal | JPA — Sheet metal cage | Steel cage | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 2.08 | — |
| Y2 Factor | — | — | 3.10 | — |
| Y0 Factor | — | — | 2.04 | — |
| E Factor | — | — | 0.32 | — |
| Cg Factor | — | — | 0.0781 | — |
| Calculation factors | ||||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.33 | — | — |
| Dynamic axial load factorY1 | — | 2.07 | — | — |
| Dynamic axial load factorY2 | — | 3.09 | — | — |
| Static axial load factorY0 | — | 2.03 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Axial load capacity in both directions | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Staticangularerrorandmisalignment | — | Yes | — | — |
| Dynamicangularerrorandmisalignment | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | — | — | Spherical roller bearings |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 3 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — |
| Bore diameter outer ringD1 | — | 204.9 mm | — | — |
| Bore diameter outer ringD1 | — | 8.067 in | — | — |
| Raceway diameter of the inner ringd2 | — | 143.1 mm | — | — |
| Raceway diameter of the inner ringd2 | — | 5.634 in | — | — |
| Diameter lubrication holeds | — | 8 mm | — | — |
| Diameter lubrication holeds | — | 0.315 in | — | — |
| Width of lubricating groovens | — | 15 mm | — | — |
| Width of lubricating groovens | — | 0.591 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of shaft abutmentd a | min. 124 mm | — | — | — |
| Diameter of housing abutmentD a | max. 226 mm | — | — | — |
| Radius of filletr a | max. 2.5 mm | — | — | — |
| Engineering — Calculation data | ||||
| SKF performance class | SKF Explorer | — | — | — |
| Limiting valuee | 0.33 | — | — | — |
| Calculation factorY 1 | 2 | — | — | — |
| Calculation factorY 2 | 3 | — | — | — |
| Calculation factorY 0 | 2 | — | — | — |
| Engineering — Dimensions | ||||
| Deviation limits of mid-range bore diametert Δdmp | -0.02 to 0 mm | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.03 to 0 mm | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.08 to 0 mm | — | — | — |
| Shoulder diameter of inner ringd 2 | ≈ 143 mm | — | — | — |
| Shoulder/recess diameter of outer ringD 1 | ≈ 204 mm | — | — | — |
| Width of lubrication grooveb | 13.9 mm | — | — | — |
| Diameter of lubrication holeK | 7.5 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — |
| Engineering — Engineering specifications | ||||
| Bore type | Cylindrical | — | — | — |
| Engineering — Radial internal clearance | ||||
| Minimum initial clearance | 75 µm | — | — | — |
| Maximum initial clearance | 120 µm | — | — | — |
| Engineering — Tolerances of run-out | ||||
| Range of section height at inner ring of assembled bearingt Kia | 6 µm | — | — | — |
| Maximum run-out of inner ring side face to the boret Sd | 9 µm | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 15 µm | — | — | — |
| Perpendicularity of outer ring outside surfacet SD | 5.5 µm | — | — | — |
| ISO tolerance class for geometrical tolerances | P5 | — | — | — |
| Logistics | ||||
| Product net weight | 17.7 kg | — | — | — |
| eClass code | 23-05-09-11 | — | — | — |
| UNSPSC code | 31171510 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 950,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 213,579.137 lbf | — | — |
| Basic static load rating, radialC0r | — | 1,070,000 N | — | — |
| Basic static load rating, radialC0r | — | 240,557.554 lbf | — | — |
| Fatigue load limit, radialCur | — | 93,000 N | — | — |
| Fatigue load limit, radialCur | — | 20,908.273 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 388158 | — | — |
| Material Number | — | — | 000000000190020721 | — |
| Official Class Key | — | — | — | 060-010-000 |
| Base Type | — | 22322 | — | — |
| World Assembly Part Number | — | — | 22322EJW33 | — |
| Old Designation | — | ["22322E1","22322-E1"] | — | — |
| Inner Ring Part Number | — | — | 110ASDC23 | — |
| Gpsd Group | — | F02 | — | — |
| Outer Ring Part Number | — | — | 110ESDC23W33 | — |
| Product Line Id | — | 37 | — | — |
| Drawing Number | — | — | M104377 | — |
| X Life Marking | — | XL | — | — |
| Upc | — | — | 0087796027145 | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.77 | — |
| SAP material number | — | 0190064030000 | — | — |
| Base product | — | 2305091103 | — | — |
| Bearing X designation | — | 22322-E1-XL | — | — |
| Mounting Manager ID | — | 22322-E1-XL | — | — |
| Grease application ID | — | 22322-E1-XL | — | — |
| Mounting dimensions | ||||
| Minimum diameter shaft shoulderda min | — | 124 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 4.882 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 226 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 8.898 in | — | — |
| Maximum recess radiusra max | — | 2.5 mm | — | — |
| Maximum recess radiusra max | — | 0.098 in | — | — |
| Product characteristics | ||||
| DesignE1 | — | Without central rip | — | — |
| Bore typeZ | — | Cylindrical | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Relubrication feature | With | Standard | — | — |
| Product identity | ||||
| Official product category | Spherical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — | — |
| Structure group ID | BS2_001 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | Yes | — | — | — |
| Product Identity | ||||
| Construction | — | Spherical roller bearings 223..-E1, main dimensions to DIN 635-2 | Spherical Roller Bearing | Imperial Series | 4.3307 in Bore | 9.4488 in OD | 3.1496 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | Bearing contains application features | — |
| Type Description | — | — | Radial SRB | — |
| Short Description | — | Spherical Roller Bearing | — | — |
| Number Of Rows | 2 | — | 2 | — |
| Tapered Bore | — | — | N | — |
| Properties | ||||
| Locating feature, bearing outer ring | Without | — | — | — |
| Radial internal clearance | CN | — | — | — |
| Tolerance class for dimensions | Normal | — | — | — |
| Tolerance class for run-out | P5 | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — |
| Indicative carbon footprint for new product | 65.4 kg CO 2 e | — | — | — |
| Indicative carbon footprint for remanufactured product | 21.7 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 240 mm |
| B | — | — | — | 80 mm |
| R(Min.) | — | — | — | 3 mm |
| Basic Load Ratings : Cr | — | — | — | 1040 kN |
| Basic Load Ratings : C0R | — | — | — | 1040 kN |
| Bore Diameter (D) | — | 110 mm | — | — |
| Overall Width | — | — | 0.000 mm | — |
| Fatigue Load Limit : Cu | — | — | — | 77.7 kN |
| Outside Diamater (D) | — | 240 mm | — | — |
| Radial Rating | — | — | 949,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 1900 min-1 |
| Total Width (B) | — | 80 mm | — | — |
| Axial Rating | — | — | 0 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2600 min-1 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 950,000 N | — | — |
| Dynamic Rating C1 | — | — | 949,000 N | — |
| Constant E | — | — | — | 0.33 |
| Basic Static Load Rating, Radial (C0R) | — | 1,070,000 N | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| Axial Load Factors : Y1 | — | — | — | 2.03 |
| Diameter Lubrication Hole (Ds) | — | 8 mm | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Axial Load Factors : Y2 | — | — | — | 3.02 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Axial Load Factors : Y0 | — | — | — | 1.98 |
| Minimum Diameter Shaft Shoulder (Da) | — | 124 mm | — | — |
| Static Radial Rating C0 | — | — | 1,050,000 N | — |
| Da(Min.) | — | — | — | 124 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — |
| Da(Max.) | — | — | — | 226 mm |
| Limiting Speed (Limiting Spe) | — | 3,000 1/min | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| Ra(Max.) | — | — | — | 2.5 mm |
| Reference Speed (Nϑr) | — | 2,130 1/min | — | — |
| Mass(Refer.) | — | — | — | 18.1 kg |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — | — |
| Maximum Diameter Of Housing Shoulder (Da) | — | 226 mm | — | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.33 | — | — |
| Width Of Lubricating Groove (Ns) | — | 15 mm | — | — |
| Dynamic Axial Load Factor (Y1) | — | 2.07 | — | — |
| Bore Diameter Outer Ring (D1) | — | 204.9 mm | — | — |
| Raceway Diameter Of The Inner Ring (D2) | — | 143.1 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — |
| Static Axial Load Factor (Y0) | — | 2.03 | — | — |
| Dynamic Axial Load Factor (Y2) | — | 3.09 | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 93,000 N | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.