Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“22272” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF22272 CA/W33360 × 650 × 170 mm | FAG22272-BEA-XL-MB1360 × 650 × 170 mm | KOYO22272R360 × 650 × 170 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 22272 CA/W33 | 22272-BEA-XL-MB1 | 22272R |
| Product family | Spherical roller bearings | — | Spherical roller bearings |
| Detailed type | Spherical roller bearing with relubrication features | Spherical roller bearings | Spherical roller bearings |
| Series | — | 22272 | — |
| Bore diameterd | 360 mm | 360 mm | 360 mm |
| Outside diameterD | 650 mm | 650 mm | 650 mm |
| WidthB | 170 mm | 170 mm | 170 mm |
| Basic dynamic load ratingC | 4430 kN | 4450 kN | 4710 kN |
| Basic static load ratingC0 | 6200 kN | 6200 kN | 5830 kN |
| Fatigue load limitPu | 440 kN | 500 kN | 583 kN |
| Reference speednref | 630 r/min | 710 r/min | — |
| Limiting speednG | 850 r/min | 1190 r/min | 410 r/min |
| Mass≈m | 247 kg | 246.5 kg | 248 kg |
| Precision class | Normal | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | — | — |
| Cage | Machined brass | MB1 — Solid brass cage | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Calculation factors | |||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.25 | — |
| Dynamic axial load factorY1 | — | 2.69 | — |
| Dynamic axial load factorY2 | — | 4 | — |
| Static axial load factorY0 | — | 2.63 | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | — | Spherical roller bearings |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 6 mm | — |
| Minimum chamfer dimensionrmin | — | 0.236 in | — |
| Bore diameter outer ringD1 | — | 566.4 mm | — |
| Bore diameter outer ringD1 | — | 22.299 in | — |
| Diameter lubrication holeds | — | 12.5 mm | — |
| Diameter lubrication holeds | — | 0.492 in | — |
| Width of lubricating groovens | — | 23.5 mm | — |
| Width of lubricating groovens | — | 0.925 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 386 mm | — | — |
| Diameter of housing abutmentD a | max. 624 mm | — | — |
| Radius of filletr a | max. 5 mm | — | — |
| Engineering — Calculation data | |||
| SKF performance class | SKF Explorer | — | — |
| Limiting valuee | 0.26 | — | — |
| Calculation factorY 1 | 2.6 | — | — |
| Calculation factorY 2 | 3.9 | — | — |
| Calculation factorY 0 | 2.5 | — | — |
| Engineering — Dimensions | |||
| Deviation limits of mid-range bore diametert Δdmp | -0.04 to 0 mm | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.075 to 0 mm | — | — |
| Deviation limits of ring widtht ΔBs | -0.4 to 0 mm | — | — |
| Shoulder diameter of inner ringd 2 | ≈ 454 mm | — | — |
| Shoulder/recess diameter of outer ringD 1 | ≈ 568 mm | — | — |
| Width of lubrication grooveb | 22.3 mm | — | — |
| Diameter of lubrication holeK | 12 mm | — | — |
| Chamfer dimensionr 1,2 | min. 6 mm | — | — |
| ISO tolerance class for dimensions | Normal | — | — |
| Engineering — Engineering specifications | |||
| Bore type | Cylindrical | — | — |
| Engineering — Radial internal clearance | |||
| Minimum initial clearance | 220 µm | — | — |
| Maximum initial clearance | 340 µm | — | — |
| Engineering — Tolerances of run-out | |||
| Range of section height at inner ring of assembled bearingt Kia | 60 µm | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 120 µm | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — |
| Logistics | |||
| Product net weight | 247.0 kg | — | — |
| eClass code | 23-05-09-11 | — | — |
| UNSPSC code | 31171510 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 4,450,000 N | — |
| Basic dynamic load rating, radialCr | — | 1,000,449.64 lbf | — |
| Basic static load rating, radialC0r | — | 6,200,000 N | — |
| Basic static load rating, radialC0r | — | 1,393,884.892 lbf | — |
| Fatigue load limit, radialCur | — | 500,000 N | — |
| Fatigue load limit, radialCur | — | 112,410.072 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 1682301 | — |
| Official Class Key | — | — | 060-010-000 |
| Base Type | — | 22272 | — |
| Gpsd Group | — | F03 | — |
| Product Line Id | — | 78 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0948626720000 | — |
| Base product | — | 2305091122 | — |
| Bearing X designation | — | 22272-BEA-XL-MB1 | — |
| Mounting Manager ID | — | 22272-BEA-XL-MB1 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 386 mm | — |
| Minimum diameter shaft shoulderda min | — | 15.197 in | — |
| Maximum diameter of housing shoulderDa max | — | 624 mm | — |
| Maximum diameter of housing shoulderDa max | — | 24.567 in | — |
| Maximum recess radiusra max | — | 5 mm | — |
| Maximum recess radiusra max | — | 0.197 in | — |
| Product characteristics | |||
| DesignBEA | — | With lose center lip ring | — |
| Bore typeZ | — | Cylindrical | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Relubrication feature | With | Standard | — |
| Product identity | |||
| Official product category | Spherical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — |
| Structure group ID | BS2_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Spherical roller bearing 222..-BEA-XL-MB1, symmetric 2 outer ribs with rib washer | — |
| Short Description | — | Spherical Roller Bearing | — |
| Properties | |||
| Number of rows | 2 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Radial internal clearance | CN | — | — |
| Tolerance class for dimensions | Normal | — | — |
| Tolerance class for run-out | Normal | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 914.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 304.0 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 650 mm |
| B | — | — | 170 mm |
| R(Min.) | — | — | 6 mm |
| Bore Diameter (D) | — | 360 mm | — |
| Basic Load Ratings : Cr | — | — | 4710 kN |
| Outside Diamater (D) | — | 650 mm | — |
| Basic Load Ratings : C0R | — | — | 5830 kN |
| Total Width (B) | — | 170 mm | — |
| Fatigue Load Limit : Cu | — | — | 583 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 4,450,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 410 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 6,200,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 550 min-1 |
| Diameter Lubrication Hole (Ds) | — | 12.5 mm | — |
| Constant E | — | — | 0.27 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Axial Load Factors : Y1 | — | — | 2.47 |
| Minimum Diameter Shaft Shoulder (Da) | — | 386 mm | — |
| Axial Load Factors : Y2 | — | — | 3.68 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| Axial Load Factors : Y0 | — | — | 2.42 |
| Limiting Speed (Limiting Spe) | — | 1,190 1/min | — |
| Da(Min.) | — | — | 388 mm |
| Reference Speed (Nϑr) | — | 710 1/min | — |
| Da(Max.) | — | — | 622 mm |
| Maximum Recess Radius (Ra Max) | — | 5 mm | — |
| Ra(Max.) | — | — | 5 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 624 mm | — |
| Mass(Refer.) | — | — | 248 kg |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.25 | — |
| Width Of Lubricating Groove (Ns) | — | 23.5 mm | — |
| Dynamic Axial Load Factor (Y1) | — | 2.69 | — |
| Bore Diameter Outer Ring (D1) | — | 566.4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm | — |
| Static Axial Load Factor (Y0) | — | 2.63 | — |
| Dynamic Axial Load Factor (Y2) | — | 4 | — |
| Fatigue Load Limit, Radial (Cur) | — | 500,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.