Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 22232-W33VA9A1. This table explores the base group 22232; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“22232” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF22232 CC/W33160 × 290 × 80 mm | FAG22232-E1-XL160 × 290 × 80 mm | TIMKEN22232EJW33160 × 290 × 80 mm | NSK22232CDE4160 × 290 × 80 mm | KOYO22232R160 × 290 × 80 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | 22232 CC/W33 | 22232-E1-XL | 22232EJW33 | 22232CDE4 | 22232R |
| Product family | Spherical roller bearings | — | Radial SRB | Spherical roller bearing | Spherical roller bearings |
| Detailed type | Spherical roller bearing with relubrication features | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings |
| Series | — | 22232 | EX26984 | — | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 290 mm | 290 mm | 290 mm | 290 mm | 290 mm |
| WidthB | 80 mm | 80 mm | 80 mm | 80 mm | 80 mm |
| Basic dynamic load ratingC | 1043 kN | 1150 kN | 1120 kN | 1140 kN | 1110 kN |
| Basic static load ratingC0 | 1290 kN | 1400 kN | 1370 kN | 1320 kN | 1270 kN |
| Fatigue load limitPu | 118 kN | 129 kN | — | — | 127 kN |
| Reference speednref | 2000 r/min | 1900 r/min | — | — | — |
| Limiting speednG | 2800 r/min | 2650 r/min | — | — | 1200 r/min |
| Mass≈m | 22.8 kg | 22.386 kg | 22.56 kg | 23.1 kg | 23.4 kg |
| Precision class | Normal | — | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | CN | — |
| Sealing | Without | — | Open | — | — |
| Cage | Sheet metal | JPA — Sheet metal cage | Steel cage | Pressed steel | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 200 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 80 mm | — |
| Minimum bearing chamferr min. | — | — | — | 3 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 2.62 | — | — |
| Y2 Factor | — | — | 3.91 | — | — |
| Y0 Factor | — | — | 2.57 | — | — |
| E Factor | — | — | 0.26 | — | — |
| Cg Factor | — | — | 0.0924 | — | — |
| Calculation factors | |||||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.26 | — | — | — |
| Dynamic axial load factorY1 | — | 2.64 | — | — | — |
| Dynamic axial load factorY2 | — | 3.93 | — | — | — |
| Static axial load factorY0 | — | 2.58 | — | 2.5 | — |
| Capabilities & suitability | |||||
| Radial load capacity | — | Yes | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — |
| Unsealed design | — | Yes | — | — | — |
| Staticangularerrorandmisalignment | — | Yes | — | — | — |
| Dynamicangularerrorandmisalignment | — | Yes | — | — | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | — | — | — | Spherical roller bearings |
| Construction | |||||
| Bore construction | — | — | — | Cylindrical bore | — |
| Cage material and manufacture | — | — | — | Pressed steel | — |
| Outer-ring lubrication features | — | — | — | E4: oil groove and oil holes | — |
| Internal clearance — catalogue omission rule | — | — | — | CN (normal), where no clearance suffix is specified | — |
| Precision — catalogue omission rule | — | — | — | ISO Normal, where no precision suffix is specified | — |
| Catalogue NSK HPS marking | — | — | — | Marked with an asterisk (HPS) | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 3 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — | — | — |
| Bore diameter outer ringD1 | — | 258.2 mm | — | — | — |
| Bore diameter outer ringD1 | — | 10.165 in | — | — | — |
| Raceway diameter of the inner ringd2 | — | 190.9 mm | — | — | — |
| Raceway diameter of the inner ringd2 | — | 7.516 in | — | — | — |
| Diameter lubrication holeds | — | 8 mm | — | — | — |
| Diameter lubrication holeds | — | 0.315 in | — | — | — |
| Width of lubricating groovens | — | 15 mm | — | — | — |
| Width of lubricating groovens | — | 0.591 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of shaft abutmentd a | min. 174 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 276 mm | — | — | — | — |
| Radius of filletr a | max. 2.5 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Limiting valuee | 0.26 | — | — | — | — |
| Calculation factorY 1 | 2.6 | — | — | — | — |
| Calculation factorY 2 | 3.9 | — | — | — | — |
| Calculation factorY 0 | 2.5 | — | — | — | — |
| Engineering — Dimensions | |||||
| Deviation limits of mid-range bore diametert Δdmp | -0.025 to 0 mm | — | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.035 to 0 mm | — | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.08 to 0 mm | — | — | — | — |
| Shoulder diameter of inner ringd 2 | ≈ 191 mm | — | — | — | — |
| Shoulder/recess diameter of outer ringD 1 | ≈ 250 mm | — | — | — | — |
| Width of lubrication grooveb | 13.9 mm | — | — | — | — |
| Diameter of lubrication holeK | 7.5 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 3 mm | — | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — | — |
| Engineering — Engineering specifications | |||||
| Bore type | Cylindrical | — | — | — | — |
| Engineering — Radial internal clearance | |||||
| Minimum initial clearance | 110 µm | — | — | — | — |
| Maximum initial clearance | 170 µm | — | — | — | — |
| Engineering — Tolerances of run-out | |||||
| Range of section height at inner ring of assembled bearingt Kia | 8 µm | — | — | — | — |
| Maximum run-out of inner ring side face to the boret Sd | 10 µm | — | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 18 µm | — | — | — | — |
| Perpendicularity of outer ring outside surfacet SD | 6.5 µm | — | — | — | — |
| ISO tolerance class for geometrical tolerances | P5 | — | — | — | — |
| Equivalent-load factors | |||||
| Dynamic load ratio thresholde | — | — | — | 0.26 | — |
| Dynamic axial factor above thresholdY2 | — | — | — | 3.8 | — |
| Dynamic axial factor at or below thresholdY3 | — | — | — | 2.6 | — |
| Load ratings | |||||
| Basic dynamic radial load ratingCr | — | — | — | 1140000 N | — |
| Basic static radial load ratingC0r | — | — | — | 1320000 N | — |
| Logistics | |||||
| Product net weight | 22.8 kg | — | — | — | — |
| eClass code | 23-05-09-11 | — | — | — | — |
| UNSPSC code | 31171510 | — | — | — | — |
| Lubrication-qualified speed | |||||
| Thermal speed rating — oil bath | — | — | — | 2200 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | 2800 r/min | — |
| Limiting speed — grease | — | — | — | 1200 r/min | — |
| Limiting speed — oil bath | — | — | — | 1500 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 1,150,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 258,543.165 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 1,400,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 314,748.201 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 129,000 N | — | — | — |
| Fatigue load limit, radialCur | — | 29,001.799 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 387950 | — | — | — |
| Material Number | — | — | 000000000190107822 | — | — |
| Official Class Key | — | — | — | — | 060-010-000 |
| Base Type | — | 22232 | — | — | — |
| World Assembly Part Number | — | — | 22232EJW33_EJA | — | — |
| Old Designation | — | ["22232-E1","22232E1"] | — | — | — |
| Inner Ring Part Number | — | — | 160ASDC22 | — | — |
| Gpsd Group | — | F02 | — | — | — |
| Outer Ring Part Number | — | — | 160ESDC22W33 | — | — |
| Product Line Id | — | 37 | — | — | — |
| Drawing Number | — | — | M968145 | — | — |
| X Life Marking | — | XL | — | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.767 | — | — |
| SAP material number | — | 0190005530000 | — | — | — |
| Base product | — | 2305091103 | — | — | — |
| Bearing X designation | — | 22232-E1-XL | — | — | — |
| Mounting Manager ID | — | 22232-E1-XL | — | — | — |
| Grease application ID | — | 22232-E1-XL | — | — | — |
| Mounting dimensions | |||||
| Minimum shaft shoulder diameterda min. | — | — | — | 174 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | — | 190 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 276 mm | — |
| Minimum housing shoulder diameterDa min. | — | — | — | 255 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 2.5 mm | — |
| Minimum diameter shaft shoulderda min | — | 174 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 6.85 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 276 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 10.866 in | — | — | — |
| Maximum recess radiusra max | — | 2.5 mm | — | — | — |
| Maximum recess radiusra max | — | 0.098 in | — | — | — |
| Product characteristics | |||||
| DesignE1 | — | Without central rip | — | — | — |
| Bore typeZ | — | Cylindrical | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Relubrication feature | With | Standard | — | — | — |
| Product identity | |||||
| Official product category | Spherical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — | — | — |
| Structure group ID | BS2_001 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | Yes | — | — | — | — |
| Product Identity | |||||
| Type Description | — | — | Radial SRB | — | — |
| Construction | — | Spherical roller bearings 222..-E1, main dimensions to DIN 635-2 | Spherical Roller Bearing | Imperial Series | 6.2992 in Bore | 11.4173 in OD | 3.1496 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | Bearing contains application features | — | — |
| Short Description | — | Spherical Roller Bearing | — | — | — |
| Number Of Rows | 2 | — | 2 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class for dimensions | Normal | — | — | — | — |
| Tolerance class for run-out | P5 | — | — | — | — |
| Candidate for remanufacturing | Yes | — | — | — | — |
| Indicative carbon footprint for new product | 84.2 kg CO 2 e | — | — | — | — |
| Indicative carbon footprint for remanufactured product | 28.0 kg CO 2 e | — | — | — | — |
| Reference mass | |||||
| Approximate catalogue mass | — | — | — | 23.1 kg | — |
| Technical Data | |||||
| d | — | — | — | — | 290 mm |
| B | — | — | — | — | 80 mm |
| R(Min.) | — | — | — | — | 3 mm |
| Overall Width | — | — | 0.000 mm | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 1110 kN |
| Bore Diameter (D) | — | 160 mm | — | — | — |
| Radial Rating | — | — | 1,120,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 1270 kN |
| Outside Diamater (D) | — | 290 mm | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 127 kN |
| Total Width (B) | — | 80 mm | — | — | — |
| Dynamic Rating C1 | — | — | 1,120,000 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 1200 min-1 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 1,150,000 N | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 1600 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 1,400,000 N | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Constant E | — | — | — | — | 0.28 |
| Diameter Lubrication Hole (Ds) | — | 8 mm | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Axial Load Factors : Y1 | — | — | — | — | 2.40 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Static Radial Rating C0 | — | — | 1,370,000 N | — | — |
| Axial Load Factors : Y2 | — | — | — | — | 3.57 |
| Minimum Diameter Shaft Shoulder (Da) | — | 174 mm | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| Axial Load Factors : Y0 | — | — | — | — | 2.35 |
| Operating Temperature Max. (Tmax) | — | 200 °C | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| Da(Min.) | — | — | — | — | 174 mm |
| Limiting Speed (Limiting Spe) | — | 2,650 1/min | — | — | — |
| Da(Max.) | — | — | — | — | 276 mm |
| Reference Speed (Nϑr) | — | 1,900 1/min | — | — | — |
| Ra(Max.) | — | — | — | — | 2.5 mm |
| Maximum Recess Radius (Ra Max) | — | 2.5 mm | — | — | — |
| Mass(Refer.) | — | — | — | — | 23.4 kg |
| Maximum Diameter Of Housing Shoulder (Da) | — | 276 mm | — | — | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.26 | — | — | — |
| Width Of Lubricating Groove (Ns) | — | 15 mm | — | — | — |
| Dynamic Axial Load Factor (Y1) | — | 2.64 | — | — | — |
| Bore Diameter Outer Ring (D1) | — | 258.2 mm | — | — | — |
| Raceway Diameter Of The Inner Ring (D2) | — | 190.9 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — | — | — |
| Static Axial Load Factor (Y0) | — | 2.58 | — | — | — |
| Dynamic Axial Load Factor (Y2) | — | 3.93 | — | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 129,000 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 200 °C | — | — | — |
| Operating temperature max.Tmax | — | 392 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.