Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 21307EJW33C4. This table explores the base group 21307; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“21307” across 5 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF21307 CC35 × 80 × 21 mm | FAG21307-E1-XL-TVPB35 × 80 × 21 mm | TIMKEN21307EJW3335 × 80 × 21 mm | NSK21307CDE435 × 80 × 21 mm | KOYO21307RZ35 × 80 × 21 mm |
|---|---|---|---|---|---|
| Comparable specifications | |||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO |
| Designation | 21307 CC | 21307-E1-XL-TVPB | 21307EJW33 | 21307CDE4 | 21307RZ |
| Product family | Spherical roller bearings | — | Radial SRB | Spherical roller bearing | Spherical roller bearings |
| Detailed type | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings | Spherical roller bearings |
| Series | — | 21307 | EX26981 | — | — |
| Bore diameterd | 35 mm | 35 mm | 35 mm | 35 mm | 35 mm |
| Outside diameterD | 80 mm | 80 mm | 80 mm | 80 mm | 80 mm |
| WidthB | 21 mm | 21 mm | 21 mm | 21 mm | 21 mm |
| Basic dynamic load ratingC | 79.2 kN | 83 kN | 91.8 kN | 71.5 kN | 86.8 kN |
| Basic static load ratingC0 | 72 kN | 74 kN | 77.8 kN | 76 kN | 75.8 kN |
| Fatigue load limitPu | 8 kN | 8.3 kN | — | — | 5.9 kN |
| Reference speednref | 8500 r/min | 6800 r/min | — | — | — |
| Limiting speednG | 12000 r/min | 10900 r/min | — | — | 6200 r/min |
| Mass≈m | 0.533 kg | 0.497 kg | 0.51 kg | 0.53 kg | 0.572 kg |
| Precision class | Normal | — | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | CN | — |
| Sealing | Without | — | Open | — | — |
| Cage | Sheet metal | TVPB — Plastic cage | Steel cage | Pressed steel | — |
| Lubricant | None | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — |
| Maximum operating temperatureTmax | — | 120 °C | — | — | — |
| Boundary dimensions | |||||
| Bearing widthB | — | — | — | 21 mm | — |
| Minimum bearing chamferr min. | — | — | — | 1.5 mm | — |
| Calculation Factors | |||||
| K Factor | — | — | 0.00 | — | — |
| Y1 Factor | — | — | 2.56 | — | — |
| Y2 Factor | — | — | 3.81 | — | — |
| Y0 Factor | — | — | 2.50 | — | — |
| E Factor | — | — | 0.26 | — | — |
| Cg Factor | — | — | 0.0437 | — | — |
| Calculation factors | |||||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.26 | — | — | — |
| Dynamic axial load factorY1 | — | 2.55 | — | — | — |
| Dynamic axial load factorY2 | — | 3.8 | — | — | — |
| Static axial load factorY0 | — | 2.5 | — | 2.4 | — |
| Classification | |||||
| Official Category Path | — | — | — | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | — | — | — | Spherical roller bearings |
| Construction | |||||
| Bore construction | — | — | — | Cylindrical bore | — |
| Cage material and manufacture | — | — | — | Pressed steel | — |
| Outer-ring lubrication features | — | — | — | E4: oil groove and oil holes | — |
| Internal clearance — catalogue omission rule | — | — | — | CN (normal), where no clearance suffix is specified | — |
| Precision — catalogue omission rule | — | — | — | ISO Normal, where no precision suffix is specified | — |
| Catalogue NSK HPS marking | — | — | — | No HPS asterisk in this row | — |
| Dimensions | |||||
| Minimum chamfer dimensionrmin | — | 1.5 mm | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.059 in | — | — | — |
| Bore diameter outer ringD1 | — | 66.6 mm | — | — | — |
| Bore diameter outer ringD1 | — | 2.622 in | — | — | — |
| Raceway diameter of the inner ringd2 | — | 47.4 mm | — | — | — |
| Raceway diameter of the inner ringd2 | — | 1.866 in | — | — | — |
| Engineering — Abutment dimensions | |||||
| Diameter of shaft abutmentd a | min. 44 mm | — | — | — | — |
| Diameter of housing abutmentD a | max. 71 mm | — | — | — | — |
| Radius of filletr a | max. 1.5 mm | — | — | — | — |
| Engineering — Calculation data | |||||
| SKF performance class | SKF Explorer | — | — | — | — |
| Limiting valuee | 0.28 | — | — | — | — |
| Calculation factorY 1 | 2.4 | — | — | — | — |
| Calculation factorY 2 | 3.6 | — | — | — | — |
| Calculation factorY 0 | 2.5 | — | — | — | — |
| Engineering — Dimensions | |||||
| Deviation limits of mid-range bore diametert Δdmp | -0.012 to 0 mm | — | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.013 to 0 mm | — | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.06 to 0 mm | — | — | — | — |
| Shoulder diameter of inner ringd 2 | ≈ 47.2 mm | — | — | — | — |
| Shoulder/recess diameter of outer ringD 1 | ≈ 65.6 mm | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 1.5 mm | — | — | — | — |
| ISO tolerance class for dimensions | Normal | — | — | — | — |
| Engineering — Engineering specifications | |||||
| Bore type | Cylindrical | — | — | — | — |
| Engineering — Radial internal clearance | |||||
| Minimum initial clearance | 30 µm | — | — | — | — |
| Maximum initial clearance | 45 µm | — | — | — | — |
| Engineering — Tolerances of run-out | |||||
| Range of section height at inner ring of assembled bearingt Kia | 5 µm | — | — | — | — |
| Maximum run-out of inner ring side face to the boret Sd | 8 µm | — | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 8 µm | — | — | — | — |
| Perpendicularity of outer ring outside surfacet SD | 4 µm | — | — | — | — |
| ISO tolerance class for geometrical tolerances | P5 | — | — | — | — |
| Equivalent-load factors | |||||
| Dynamic load ratio thresholde | — | — | — | 0.28 | — |
| Dynamic axial factor above thresholdY2 | — | — | — | 3.6 | — |
| Dynamic axial factor at or below thresholdY3 | — | — | — | 2.4 | — |
| Load ratings | |||||
| Basic dynamic radial load ratingCr | — | — | — | 71500 N | — |
| Basic static radial load ratingC0r | — | — | — | 76000 N | — |
| Logistics | |||||
| Product net weight | 0.533 kg | — | — | — | — |
| eClass code | 23-05-09-11 | — | — | — | — |
| UNSPSC code | 31171510 | — | — | — | — |
| Lubrication-qualified speed | |||||
| Thermal speed rating — oil bath | — | — | — | 7100 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | — | 4000 r/min | — |
| Limiting speed — oil bath | — | — | — | 5300 r/min | — |
| Main Dimensions & Performance Data | |||||
| Basic dynamic load rating, radialCr | — | 83,000 N | — | — | — |
| Basic dynamic load rating, radialCr | — | 18,660.072 lbf | — | — | — |
| Basic static load rating, radialC0r | — | 74,000 N | — | — | — |
| Basic static load rating, radialC0r | — | 16,636.691 lbf | — | — | — |
| Fatigue load limit, radialCur | — | 8,300 N | — | — | — |
| Fatigue load limit, radialCur | — | 1,866.007 lbf | — | — | — |
| Manufacturer Identity | |||||
| Schaeffler Product Code | — | 386660 | — | — | — |
| Material Number | — | — | 000000000190013548 | — | — |
| Official Class Key | — | — | — | — | 060-010-000 |
| Base Type | — | 21307 | — | — | — |
| World Assembly Part Number | — | — | 21307EJW33 | — | — |
| Old Designation | — | ["21307-E1-TVPB","21307E1TVPB"] | — | — | — |
| Inner Ring Part Number | — | — | 35ASDC13 | — | — |
| Gpsd Group | — | F02 | — | — | — |
| Outer Ring Part Number | — | — | 35ESDC13W33 | — | — |
| Product Line Id | — | 37 | — | — | — |
| Drawing Number | — | — | M101064 | — | — |
| X Life Marking | — | XL | — | — | — |
| Upc | — | — | 0087796022546 | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.763 | — | — |
| SAP material number | — | 0190001970000 | — | — | — |
| Base product | — | 2305091101 | — | — | — |
| Bearing X designation | — | 21307-E1-XL-TVPB | — | — | — |
| Mounting Manager ID | — | 21307-E1-XL-TVPB | — | — | — |
| Grease application ID | — | 21307-E1-XL-TVPB | — | — | — |
| Mounting dimensions | |||||
| Minimum shaft shoulder diameterda min. | — | — | — | 44 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | — | 47 mm | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 71 mm | — |
| Minimum housing shoulder diameterDa min. | — | — | — | 67 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | 1.5 mm | — |
| Minimum diameter shaft shoulderda min | — | 44 mm | — | — | — |
| Minimum diameter shaft shoulderda min | — | 1.732 in | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 71 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 2.795 in | — | — | — |
| Maximum recess radiusra max | — | 1.5 mm | — | — | — |
| Maximum recess radiusra max | — | 0.059 in | — | — | — |
| Product characteristics | |||||
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — |
| Product identity | |||||
| Official product category | Spherical roller bearings | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-bearings | — | — | — | — |
| Structure group ID | BS2_001 | — | — | — | — |
| Available from SKF | Yes | — | — | — | — |
| Remanufacturable | No | — | — | — | — |
| Product Identity | |||||
| Short Description | — | Spherical Roller Bearing | — | — | — |
| Type Description | — | — | Radial SRB | — | — |
| Construction | — | — | Spherical Roller Bearing | Imperial Series | 1.3780 in Bore | 3.1496 in OD | 0.8268 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | Bearing contains application features | — | — |
| Number Of Rows | 2 | — | 2 | — | — |
| Tapered Bore | — | — | N | — | — |
| Properties | |||||
| Locating feature, bearing outer ring | Without | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — |
| Tolerance class for dimensions | Normal | — | — | — | — |
| Tolerance class for run-out | P5 | — | — | — | — |
| Relubrication feature | Without | — | — | — | — |
| Indicative carbon footprint for new product | 2.0 kg CO 2 e | — | — | — | — |
| Reference mass | |||||
| Approximate catalogue mass | — | — | — | 0.53 kg | — |
| Technical Data | |||||
| d | — | — | — | — | 80 mm |
| B | — | — | — | — | 21 mm |
| R(Min.) | — | — | — | — | 1.5 mm |
| Bore Diameter (D) | — | 35 mm | — | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 86.8 kN |
| Outside Diamater (D) | — | 80 mm | — | — | — |
| Overall Width | — | — | 0.000 mm | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 75.8 kN |
| Total Width (B) | — | 21 mm | — | — | — |
| Radial Rating | — | — | 91,800 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 5.90 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 83,000 N | — | — | — |
| Axial Rating | — | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 6200 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 74,000 N | — | — | — |
| Dynamic Rating C1 | — | — | 91,800 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 8300 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — |
| Constant E | — | — | — | — | 0.27 |
| Minimum Diameter Shaft Shoulder (Da) | — | 44 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — |
| Axial Load Factors : Y1 | — | — | — | — | 2.49 |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — |
| Axial Load Factors : Y2 | — | — | — | — | 3.71 |
| Limiting Speed (Limiting Spe) | — | 10,900 1/min | — | — | — |
| Static Radial Rating C0 | — | — | 77,800 N | — | — |
| Axial Load Factors : Y0 | — | — | — | — | 2.43 |
| Reference Speed (Nϑr) | — | 6,800 1/min | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — |
| Da(Min.) | — | — | — | — | 43.5 mm |
| Maximum Recess Radius (Ra Max) | — | 1.5 mm | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — |
| Da(Max.) | — | — | — | — | 71.5 mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 71 mm | — | — | — |
| Ra(Max.) | — | — | — | — | 1.5 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.26 | — | — | — |
| Mass(Refer.) | — | — | — | — | 0.572 kg |
| Dynamic Axial Load Factor (Y1) | — | 2.55 | — | — | — |
| Bore Diameter Outer Ring (D1) | — | 66.6 mm | — | — | — |
| Raceway Diameter Of The Inner Ring (D2) | — | 47.4 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 1.5 mm | — | — | — |
| Static Axial Load Factor (Y0) | — | 2.5 | — | — | — |
| Dynamic Axial Load Factor (Y2) | — | 3.8 | — | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 8,300 N | — | — | — |
| Temperature range | |||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.