Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 16068-MA. This table explores the base group 16068; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“16068” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF16068 MA340 × 520 × 57 mm | FAG16068-M340 × 520 × 57 mm | KOYO16068340 × 520 × 57 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 16068 MA | 16068-M | 16068 |
| Product family | Deep groove ball bearings | — | Single-row / Open type |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 16068 | — |
| Bore diameterd | 340 mm | 340 mm | 340 mm |
| Outside diameterD | 520 mm | 520 mm | 520 mm |
| WidthB | 57 mm | 57 mm | 57 mm |
| Basic dynamic load ratingC | 345 kN | 355 kN | 419 kN |
| Basic static load ratingC0 | 520 kN | 550 kN | 512 kN |
| Fatigue load limitPu | 10.6 kN | 15.7 kN | 16.8 kN |
| Reference speednref | 1900 r/min | 1460 r/min | — |
| Limiting speednG | 1500 r/min | 2140 r/min | 980 r/min |
| Mass≈m | 46.8 kg | 62.5 kg | 46.8 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | Without — Not sealed | Open |
| Cage | Machined brass | M — Solid brass cage, rolling element guided | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | Without — Bearing not greased | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Calculation factors | |||
| Calculation factorf0 | — | 16.4 | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Largebearing | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Deep groove ball bearings - Single-row - Open type |
| Official Classification 1 | — | — | Deep groove ball bearings / Single-row / Open type |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 4 mm | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — |
| Shoulder diameter outer ringD1 | — | 458.35 mm | — |
| Shoulder diameter outer ringD1 | — | 18.045 in | — |
| Shoulder diameter inner ringd1 | — | 403.1 mm | — |
| Shoulder diameter inner ringd1 | — | 15.87 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 355 mm | — | — |
| Diameter of housing abutmentD a | max. 505 mm | — | — |
| Radius of shaft or housing filletr a | max. 3 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.02 | — | — |
| Calculation factorf 0 | 16.3 | — | — |
| Engineering — Dimensions | |||
| Deviation limits of mid-range bore diametert Δdmp | -0.04 to 0 mm | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.05 to 0 mm | — | — |
| Deviation limits of ring widtht ΔBs | -0.4 to 0 mm | — | — |
| Shoulder diameterd 1 | ≈ 461.68 mm | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — |
| ISO tolerance class for dimensions | Normal | — | — |
| Engineering — Tolerances of run-out | |||
| Range of section height at inner ring of assembled bearingt Kia | 60 µm | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 100 µm | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — |
| Logistics | |||
| Product net weight | 46.8 kg | — | — |
| eClass code | 23-05-08-01 | — | — |
| UNSPSC code | 31171504 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 355,000 N | — |
| Basic dynamic load rating, radialCr | — | 79,811.151 lbf | — |
| Basic static load rating, radialC0r | — | 550,000 N | — |
| Basic static load rating, radialC0r | — | 123,651.079 lbf | — |
| Fatigue load limit, radialCur | — | 15,700 N | — |
| Fatigue load limit, radialCur | — | 3,529.676 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 349197 | — |
| Official Class Key | — | — | 010-010-010 |
| Base Type | — | 16068 | — |
| Old Designation | — | ["16068M"] | — |
| Gpsd Group | — | S02 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | n.r. | — |
| SAP material number | — | 0190119540000 | — |
| Base product | — | 2305080101 | — |
| Bearing X designation | — | 16068-M | — |
| Mounting Manager ID | — | 16068-M | — |
| Grease application ID | — | 16068-M | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 354.6 mm | — |
| Minimum diameter shaft shoulderda min | — | 13.961 in | — |
| Maximum diameter of housing shoulderDa max | — | 505.4 mm | — |
| Maximum diameter of housing shoulderDa max | — | 19.898 in | — |
| Maximum fillet radiusra max | — | 3 mm | — |
| Maximum fillet radiusra max | — | 0.118 in | — |
| Product characteristics | |||
| Type of SealWithout | — | Not sealed | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Bore typeZ | — | Cylindrical | — |
| Product identity | |||
| Official product category | Deep groove ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — |
| Structure group ID | BB1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | Yes | — | — |
| Product Identity | |||
| Construction | — | Deep groove ball bearing 160..-M, single row, solid brass cage | — |
| Short Description | — | Deep groove ball bearing | — |
| Properties | |||
| Filling slots | Without | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Matched arrangement | No | — | — |
| Radial internal clearance | CN | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Candidate for remanufacturing | Yes | — | — |
| Indicative carbon footprint for new product | 173.0 kg CO 2 e | — | — |
| Indicative carbon footprint for remanufactured product | 57.6 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 520 mm |
| B | — | — | 57 mm |
| R(Min.) | — | — | 4 mm |
| Basic Load Ratings : Cr | — | — | 419 kN |
| Bore Diameter (D) | — | 340 mm | — |
| Basic Load Ratings : C0R | — | — | 512 kN |
| Outside Diameter (D) | — | 520 mm | — |
| Fatigue Load Limit : Cu | — | — | 16.8 kN |
| Width (B) | — | 57 mm | — |
| Factor : F0 | — | — | 16.4 |
| Basic Dynamic Load Rating, Radial (Cr) | — | 355,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 980 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 550,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 1200 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Da(Min.) | — | — | 356 mm |
| Limiting Speed (Ng) | — | 2,140 1/min | — |
| Da(Max.) | — | — | 507 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| Ra(Max.) | — | — | 3 mm |
| Reference Speed (Nϑr) | — | 1,460 1/min | — |
| Mass(Refer.) | — | — | 46.8 kg |
| Calculation Factor (F0) | — | 16.4 | — |
| Fatigue Load Limit, Radial (Cur) | — | 15,700 N | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 354.6 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 403.1 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 505.4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 3 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 458.35 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.