Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“11208” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF11208 TN940 × 80 × 56 mm | FAG11208-TVH40 × 80 × 56 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 11208 TN9 | 11208-TVH |
| Product family | Self-aligning ball bearings | — |
| Detailed type | Self-aligning ball bearing with extended inner ring | Self-aligning ball bearings |
| Series | — | 11208 |
| Bore diameterd | 40 mm | 40 mm |
| Outside diameterD | 80 mm | 80 mm |
| WidthB | 56 mm | 56 mm |
| Basic dynamic load ratingC | 19 kN | 19.4 kN |
| Basic static load ratingC0 | 6.55 kN | 6.5 kN |
| Fatigue load limitPu | 0.335 kN | 0.415 kN |
| Reference speednref | 13000 r/min | 8600 r/min |
| Limiting speednG | 5000 r/min | 10100 r/min |
| Mass≈m | 0.691 kg | 0.736 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Cage | Non-metallic | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | — | 0.22 |
| Dynamic axial load factorY1 | — | 2.91 |
| Dynamic axial load factorY2 | — | 4.51 |
| Static axial load factorY0 | — | 3.05 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 1.1 mm |
| Minimum chamfer dimensionrmin | — | 0.043 in |
| Shoulder diameter outer ringD1 | — | 67.3 mm |
| Shoulder diameter outer ringD1 | — | 2.65 in |
| Shoulder diameter inner ringd1 | — | 54 mm |
| Shoulder diameter inner ringd1 | — | 2.126 in |
| Width retaining slotb | — | 7 mm |
| Width retaining slotb | — | 0.276 in |
| Hight retaining slott | — | 9 mm |
| Hight retaining slott | — | 0.354 in |
| Engineering — Abutment dimensions | ||
| Abutment diameter housingD a | max. 73 mm | — |
| Fillet radiusr a | max. 1.1 mm | — |
| Engineering — Calculation data | ||
| Permissible angular misalignmentα | 2.5 ° | — |
| Calculation factork r | 0.04 | — |
| Limiting valuee | 0.22 | — |
| Calculation factorY 0 | 2.8 | — |
| Calculation factorY 1 | 2.9 | — |
| Calculation factorY 2 | 4.5 | — |
| Engineering — Dimensions | ||
| Width outer ringC | 18 mm | — |
| Shoulder diameter inner ringd 1 | ≈ 54 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 69 mm | — |
| Chamfer dimensionr 1,2 | min. 1.1 mm | — |
| Engineering — Engineering specifications | ||
| Bore type | Cylindrical | — |
| Logistics | ||
| Product net weight | 0.691 kg | — |
| eClass code | 23-05-08-06 | — |
| UNSPSC code | 31171532 | — |
| Main Dimensions & Performance Data | ||
| Total widthB | — | 56 mm |
| Total widthB | — | 2.205 in |
| Width, outer ringBC | — | 18 mm |
| Width, outer ringBC | — | 0.709 in |
| Width, inner ringBi | — | 56 mm |
| Width, inner ringBi | — | 2.205 in |
| Basic dynamic load rating, radialCr | — | 19,400 N |
| Basic dynamic load rating, radialCr | — | 4,361.511 lbf |
| Basic static load rating, radialC0r | — | 6,500 N |
| Basic static load rating, radialC0r | — | 1,461.331 lbf |
| Fatigue load limit, radialCur | — | 415 N |
| Fatigue load limit, radialCur | — | 93.3 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 366333 |
| Base Type | — | 11208 |
| Old Designation | — | ["11208TV"] |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0167001630000 |
| Base product | — | 2305080602 |
| Bearing X designation | — | 11208-TVH |
| Mounting Manager ID | — | 11208-TVH |
| Grease application ID | — | 11208-TVH |
| Mounting dimensions | ||
| Maximum diameter of housing shoulderDa max | — | 73 mm |
| Maximum diameter of housing shoulderDa max | — | 2.874 in |
| Maximaler Hohlkehlradiusra max | — | 1 mm |
| Maximaler Hohlkehlradiusra max | — | 0.039 in |
| Product identity | ||
| Official product category | Self-aligning ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/self-aligning-ball-bearings | — |
| Structure group ID | BJ1_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Self-aligning ball bearing 112..-TVH, plastic cage |
| Short Description | — | Self-aligning ball bearing |
| Properties | ||
| Retaining feature, inner ring | Locating slot | — |
| Locating feature, bearing outer ring | Without | — |
| Number of rows | 2 | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 2.6 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 40 mm |
| Outside Diameter (D) | — | 80 mm |
| Width (B) | — | 56 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 19,400 N |
| Basic Static Load Rating, Radial (C0R) | — | 6,500 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 10,100 1/min |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Reference Speed (Nϑr) | — | 8,600 1/min |
| Width, Inner Ring (Bi) | — | 56 mm |
| Width Retaining Slot (B) | — | 7 mm |
| Fatigue Load Limit, Radial (Cur) | — | 415 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | — | 0.22 |
| Shoulder Diameter Inner Ring (D1) | — | 54 mm |
| Dynamic Axial Load Factor (Y1) | — | 2.91 |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 73 mm |
| Minimum Chamfer Dimension (Rmin) | — | 1.1 mm |
| Maximum Fillet Radius (Ra Max) | — | 1 mm |
| Shoulder Diameter Outer Ring (D1) | — | 67.3 mm |
| Width, Outer Ring (Bc) | — | 18 mm |
| Dynamic Axial Load Factor (Y2) | — | 4.51 |
| Static Axial Load Factor (Y0) | — | 3.05 |
| Hight Retaining Slot (T) | — | 9 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 120 °C |
| Operating temperature max.Tmax | — | 248 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.