Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare WS81106 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFWS 8110630 × 47 × mm | INAWS81106Shaft locating washer |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | WS 81106 | WS81106 |
| Product family | Washers | — |
| Detailed type | Ws shaft washer for cylindrical and needle roller thrust bearings | Shaft locating washer |
| Bore diameterd | 30 mm | — |
| Outside diameterD | 47 mm | — |
| HeightH | 3 mm | 3 mm |
| Mass≈m | 0.02 kg | 0.0225 kg |
| Engineering — Dimensions | ||
| Nominal shaft diameter for housing washer WS seriesd | 30 mm | — |
| Thickness shaft washer WS seriesB | 3 mm | — |
| Outside diameter shaft washerd 1 | 47 mm | — |
| Chamfer dimension shaft washer WS seriesr 1,2 | min. 0.6 mm | — |
| Logistics | ||
| Product net weight | 0.02 kg | — |
| UNSPSC code | 31171505 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 411123 |
| Base Type | — | WS81106 |
| Gpsd Group | — | I02 |
| Product Line Id | — | 12 |
| Product identity | ||
| Official product category | Washers | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-thrust-bearings | — |
| Structure group ID | BGS_BGN_WASHER_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Axial cylindrical roller bearings 811, single direction, comprising K811, GS, WS |
| Short Description | — | Shaft locating washer |
| Properties | ||
| Bearing part | Shaft washer | — |
| Material | Bearing steel | — |
| Coating | Without | — |
| Technical Data | ||
| Bore Diameter Bearing Washer (D) | — | 30 mm |
| Rip Diameter Shaft Washer (D1) | — | 47 mm |
| Height Shaft Washer (B) | — | 3 mm |
| Minimum Chamfer Dimension (Rmin) | — | 0.6 mm |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.