Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare W12 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFW 1260.96 × × mm | INAW12-H7-CRSolid shaft |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | W 12 | W12-H7-CR |
| Product family | Lock washers | — |
| Detailed type | Lock washer for inch lock nuts | Solid shaft |
| Series | — | W12 |
| Bore diameterd | 60.96 mm | — |
| Mass≈m | 0.025 kg | — |
| Engineering — Dimensions | ||
| Side face diameterd 1 | 73 mm | — |
| Outside diameter over tabsd 2 | 84.938 mm | — |
| Thickness materialB | 1.346 mm | — |
| Width inner tabf | 7.366 mm | — |
| Inside dimension under inner tabM | 57.582 mm | — |
| Projection of key tangV | 3.175 mm | — |
| Logistics | ||
| Product net weight | 0.025 kg | — |
| eClass code | 23-11-07-05 | — |
| UNSPSC code | 31163218 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 2049360 |
| Base Type | — | W12 |
| Product Line Id | — | 04 |
| Product identity | ||
| Official product category | Lock washers | — |
| Official taxonomy path | /products/rolling-bearings/accessories/lock-nuts/keyway | — |
| Structure group ID | ANL_011 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | solid shafts, with axial and/or radial threaded holes |
| Short Description | — | Solid shaft |
| Properties | ||
| Locking device | Lock washer | — |
| Technical Data | ||
| Length Maximum (Lmax) | — | 5,900 mm |
| Parallelism (T2) | — | 6 µm |
| Diameter Shaft (Dlw) | — | 12 mm |
| Diameter Shaft Low (H7Tol) | — | -18 µm |
| Diameter Shaft High (H7Tol) | — | 0 µm |
| Surface Hardness Depth (Shdmin) | — | 0.6 mm |
| Roundness (T1) | — | 5 µm |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.