Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare QJ221 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGQJ221-N2-MPA105 × 190 × 36 mm | NSKQJ221105 × 190 × 36 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | QJ221-N2-MPA | QJ221 |
| Product family | — | Four point contact ball bearing |
| Detailed type | Four-point contact bearing | Four point contact ball bearing |
| Series | QJ221 | — |
| Bore diameterd | 105 mm | 105 mm |
| Outside diameterD | 190 mm | 190 mm |
| WidthB | 36 mm | 36 mm |
| Basic dynamic load ratingC | 233 kN | — |
| Basic static load ratingC0 | 255 kN | — |
| Fatigue load limitPu | 12 kN | — |
| Reference speednref | 3450 r/min | — |
| Limiting speednG | 6200 r/min | — |
| Mass≈m | 4.635 kg | 4.7 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | MPA — Solid brass cage, outer ring guided | Machined brass |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 239000 N |
| Basic static axial load ratingC0a | — | 435000 N |
| Boundary dimensions | ||
| Individual bearing widthB | — | 36 mm |
| Minimum bearing chamferr min. | — | 2.1 mm |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Construction | ||
| Nominal contact angleα | — | 35 ° |
| Cage material and construction | — | Machined brass |
| Construction / arrangement | — | Four-point contact bearing, split inner ring |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 2.1 mm | — |
| Minimum chamfer dimensionrmin | 0.083 in | — |
| Shoulder diameter outer ringD1 | 161.6 mm | — |
| Shoulder diameter outer ringD1 | 6.362 in | — |
| Shoulder diameter inner ringd1 | 134.84 mm | — |
| Shoulder diameter inner ringd1 | 5.309 in | — |
| Distance between the apexes of the pressure conesa | 103.3 mm | — |
| Distance between the apexes of the pressure conesa | 4.067 in | — |
| Hight retaining slotan | 10.1 mm | — |
| Hight retaining slotan | 0.398 in | — |
| Width retaining slotbn | 8.5 mm | — |
| Width retaining slotbn | 0.335 in | — |
| Radius retaining slotrn | 2 mm | — |
| Radius retaining slotrn | 0.079 in | — |
| Angle retaining slot | 45 ° | — |
| Contact angleα | 35 ° | — |
| Load-centre geometry | ||
| Load-centre spacinga0 | — | 103.3 mm |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 2600 r/min |
| Limiting speed — oil | — | 3600 r/min |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 233,000 N | — |
| Basic dynamic load rating, radialCr | 52,383.094 lbf | — |
| Basic static load rating, radialC0r | 255,000 N | — |
| Basic static load rating, radialC0r | 57,329.137 lbf | — |
| Fatigue load limit, radialCur | 12,000 N | — |
| Fatigue load limit, radialCur | 2,697.842 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 366519 | — |
| Base Type | QJ221 | — |
| Old Designation | ["QJ221N2MPA"] | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| SAP material number | 0192611600000 | — |
| Base product | 230508AD41 | — |
| Bearing X designation | QJ221-N2-MPA | — |
| Mounting Manager ID | QJ221-N2-MPA | — |
| Grease application ID | QJ221-N2-MPA | — |
| Mass reference | ||
| Approximate mass | — | 4.7 kg |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 117 mm | — |
| Minimum diameter shaft shoulderda min | 4.606 in | — |
| Maximum diameter of housing shoulderDa max | 178 mm | — |
| Maximum diameter of housing shoulderDa max | 7.008 in | — |
| Maximum fillet radiusra max | 2.1 mm | — |
| Maximum fillet radiusra max | 0.083 in | — |
| Mounting dimensions — shown arrangement | ||
| Minimum shaft shoulder diameterda min. | — | 117 mm |
| Maximum housing shoulder diameterDa max. | — | 178 mm |
| Maximum adjacent fillet radiusra max. | — | 2 mm |
| Product characteristics | ||
| Design, bearing outer ringN2 | Two retaining grooves in the outer ring on one side | — |
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — |
| Axial internal clearanceCN | Group N (CN) | — |
| Product Identity | ||
| Construction | Four point contact bearing QJ2..-N2-MPA, holding grooves, solid brass cage | — |
| Short Description | Four-point contact bearing | — |
| Technical Data | ||
| Bore Diameter (D) | 105 mm | — |
| Outside Diameter (D) | 190 mm | — |
| Width (B) | 36 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | 233,000 N | — |
| Basic Static Load Rating, Radial (C0R) | 255,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 6,200 1/min | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Reference Speed (Nϑr) | 3,450 1/min | — |
| Angle Retaining Slot (Angle Retain) | 45 ° | — |
| Hight Retaining Slot (An) | 10.1 mm | — |
| Radius Retaining Slot (Rn) | 2 mm | — |
| Fatigue Load Limit, Radial (Cur) | 12,000 N | — |
| Minimum Diameter Shaft Shoulder (Da Min) | 117 mm | — |
| Shoulder Diameter Inner Ring (D1) | 134.84 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 178 mm | — |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | — |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | — |
| Shoulder Diameter Outer Ring (D1) | 161.6 mm | — |
| Contact Angle (Α) | 35 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 103.3 mm | — |
| Width Retaining Slot (Bn) | 8.5 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.