Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare QJ209 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFQJ 209/C245 × 85 × 19 mm | FAGQJ209-XL-MPA45 × 85 × 19 mm | NSKQJ20945 × 85 × 19 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | QJ 209/C2 | QJ209-XL-MPA | QJ209 |
| Product family | Angular contact ball bearings | — | Four point contact ball bearing |
| Detailed type | Four-point contact ball bearing | Four-point contact bearing | Four point contact ball bearing |
| Series | — | QJ209 | — |
| Bore diameterd | 45 mm | 45 mm | 45 mm |
| Outside diameterD | 85 mm | 85 mm | 85 mm |
| WidthB | 19 mm | 19 mm | 19 mm |
| Basic dynamic load ratingC | 65 kN | 63 kN | — |
| Basic static load ratingC0 | 58.5 kN | 53 kN | — |
| Fatigue load limitPu | — | 3.7 kN | — |
| Reference speednref | — | 7000 r/min | — |
| Limiting speednG | 14000 r/min | 16200 r/min | — |
| Mass≈m | 0.475 kg | 0.5 kg | 0.52 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Sealing | Without | — | — |
| Cage | Sheet metal | MPA — Solid brass cage, outer ring guided | Machined brass |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Axial load ratings | |||
| Basic dynamic axial load ratingCa | — | — | 60000 N |
| Basic static axial load ratingC0a | — | — | 88500 N |
| Boundary dimensions | |||
| Individual bearing widthB | — | — | 19 mm |
| Minimum bearing chamferr min. | — | — | 1.1 mm |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Construction | |||
| Nominal contact angleα | — | — | 35 ° |
| Cage material and construction | — | — | Machined brass |
| Construction / arrangement | — | — | Four-point contact bearing, split inner ring |
| Dimensions | |||
| Contact angle | 35.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 1.1 mm | — |
| Minimum chamfer dimensionrmin | — | 0.043 in | — |
| Shoulder diameter outer ringD1 | — | 72 mm | — |
| Shoulder diameter outer ringD1 | — | 2.835 in | — |
| Shoulder diameter inner ringd1 | — | 58.5 mm | — |
| Shoulder diameter inner ringd1 | — | 2.303 in | — |
| Distance between the apexes of the pressure conesa | — | 45.5 mm | — |
| Distance between the apexes of the pressure conesa | — | 1.791 in | — |
| Contact angleα | — | 35 ° | — |
| Load-centre geometry | |||
| Load-centre spacinga0 | — | — | 45.5 mm |
| Logistics | |||
| Product net weight | 0.475 kg | — | — |
| eClass code | 23-05-08-05 | — | — |
| UNSPSC code | 31171538 | — | — |
| Lubrication-qualified speed | |||
| Limiting speed — grease | — | — | 6300 r/min |
| Limiting speed — oil | — | — | 8500 r/min |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 63,000 N | — |
| Basic dynamic load rating, radialCr | — | 14,163.669 lbf | — |
| Basic static load rating, radialC0r | — | 53,000 N | — |
| Basic static load rating, radialC0r | — | 11,915.468 lbf | — |
| Fatigue load limit, radialCur | — | 3,700 N | — |
| Fatigue load limit, radialCur | — | 831.835 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 366598 | — |
| Base Type | — | QJ209 | — |
| Old Designation | — | ["QJ209-MPA"] | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0167422650000 | — |
| Base product | — | 230508AD41 | — |
| Bearing X designation | — | QJ209-XL-MPA | — |
| Mounting Manager ID | — | QJ209-XL-MPA | — |
| Grease application ID | — | QJ209-XL-MPA | — |
| Mass reference | |||
| Approximate mass | — | — | 0.52 kg |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 52 mm | — |
| Minimum diameter shaft shoulderda min | — | 2.047 in | — |
| Maximum diameter of housing shoulderDa max | — | 78 mm | — |
| Maximum diameter of housing shoulderDa max | — | 3.071 in | — |
| Maximum fillet radiusra max | — | 1 mm | — |
| Maximum fillet radiusra max | — | 0.039 in | — |
| Mounting dimensions — shown arrangement | |||
| Minimum shaft shoulder diameterda min. | — | — | 52 mm |
| Maximum housing shoulder diameterDa max. | — | — | 78 mm |
| Maximum adjacent fillet radiusra max. | — | — | 1 mm |
| Product characteristics | |||
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Axial internal clearanceCN | — | Group N (CN) | — |
| Product identity | |||
| Official product category | Angular contact ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/four-point-contact-ball-bearings | — | — |
| Structure group ID | BAQ_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Four point contact bearing QJ2..-XL-MPA, X-life, solid brass cage | — |
| Short Description | — | Four-point contact bearing | — |
| Properties | |||
| Contact type | Four-point contact | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Ring type | Two-piece inner ring and one-piece outer ring | — | — |
| Matched arrangement | No | — | — |
| Universal matching bearing | No | — | — |
| Axial internal clearance | C2 | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 1.8 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 45 mm | — |
| Outside Diameter (D) | — | 85 mm | — |
| Width (B) | — | 19 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 63,000 N | — |
| Basic Static Load Rating, Radial (C0R) | — | 53,000 N | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 16,200 1/min | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Reference Speed (Nϑr) | — | 7,000 1/min | — |
| Fatigue Load Limit, Radial (Cur) | — | 3,700 N | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 52 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 58.5 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 78 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 1.1 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 1 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 72 mm | — |
| Contact Angle (Α) | — | 35 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 45.5 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.