Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NX35 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFNX 3535 × 47 × 30 mm | INANX35-XL35 × 47 × 30 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | NX 35 | NX35-XL |
| Product family | Combined needle roller / thrust ball bearings | — |
| Detailed type | Combined needle roller / thrust ball bearing (full complement thrust part) with a cover with lubrication holes | Needle roller/axial ball bearing |
| Series | — | NX35 |
| Bore diameterd | 35 mm | 35 mm |
| Outside diameterD | 47 mm | 47 mm |
| WidthB | 30 mm | 30 mm |
| Basic dynamic load ratingC | — | 27.5 kN |
| Basic static load ratingC0 | — | 41.5 kN |
| Fatigue load limitPu | — | 7.4 kN |
| Reference speednref | 5000 r/min | — |
| Limiting speednG | 5600 r/min | 3700 r/min |
| Mass≈m | 0.136 kg | 0.137 kg |
| Bearing material | Bearing steel | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 40.5 mm | — |
| Diameter of housing abutmentD a | max. 45 mm | — |
| Distance side face to back face of snap ringC a | 14.2 mm | — |
| Radius of filletr a | max. 0.3 mm | — |
| Bore diameter of associated inner ringd i | 30 mm | — |
| Diameter of inner ring racewayF | 35 mm | — |
| Width of associated inner ringB i | 20 mm | — |
| Engineering — Associated products | ||
| Inner ring | IR 30x35x20 | — |
| Snap ring | SW 47 | — |
| Engineering — Calculation data | ||
| Basic dynamic load rating, radialC | 24.6 kN | — |
| Basic static load rating, radialC 0 | 45 kN | — |
| Basic dynamic load rating, axialC | 13.5 kN | — |
| Basic static load rating, axialC 0 | 38 kN | — |
| Fatigue load limit, radialP u | 5.6 kN | — |
| Fatigue load limit, axialP u | 1.4 kN | — |
| Minimum axial load factorA | 0.008 | — |
| Engineering — Dimensions | ||
| Diameter under rollersF w | 35 mm | — |
| Distance side face to lubrication holeC 2 | 10 mm | — |
| Bore diameter of thrust partd | 35 mm | — |
| Chamfer dimensionr 1,2 | min. 0.3 mm | — |
| Logistics | ||
| Product net weight | 0.136 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 397463 |
| Base Type | — | NX35 |
| Old Designation | — | ["NX35"] |
| Gpsd Group | — | I01 |
| Product Line Id | — | 09 |
| X Life Marking | — | XL |
| Product identity | ||
| Official product category | Combined needle roller / thrust ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/combined-needle-roller-bearings | — |
| Structure group ID | BVN_002_003 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Needle roller/axial ball bearings NX, single direction axial component, for oil lubrication |
| Short Description | — | Needle roller/axial ball bearing |
| Properties | ||
| Rolling bearing type | Needle roller / full complement thrust ball bearing | — |
| Bearing part | Radial part without inner ring | — |
| Thrust part | Without cage | — |
| Radial part | With cage | — |
| Rolling element (thrust part) | Balls | — |
| Axial load capability | Single-direction | — |
| Tolerance class | Other | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Special feature | Thrust part with stamped steel cover with lubrication holes | — |
| Lubricant (thrust part) | None | — |
| Indicative carbon footprint for new product | 0.5 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (Fw) | — | 35 mm |
| Outside Diamater (D) | — | 47 mm |
| Height (C) | — | 30 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 27,500 N |
| Basic Static Load Rating, Radial (C0R) | — | 41,500 N |
| Basic Dynamic Load Rating, Axial (Ca) | — | 12,400 N |
| Basic Static Load Rating, Axial (C0A) | — | 32,500 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Limiting Speed (Limiting Spe) | — | 3,700 1/min |
| Fatigue Load Limit, Axial (Cua) | — | 1,480 N |
| Maximum Recess Radius (Ra Max) | — | 0.3 mm |
| Mounting Dimension Shaft Shoulder (Da) | — | 40.5 mm |
| Connection Diameter Snap Ring (D1) | — | 50.1 mm |
| Distance To Lubrication Hole (C1) | — | 10 mm |
| Distance To Lubrication Hole (C2) | — | 10 mm |
| Connection Width With Snap Ring (C2) | — | 14.2 mm |
| Bore Diameter Of Shaft Washer (Dw) | — | 35 mm |
| Minimum Chamfer Dimension (Rmin) | — | 0.3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 7,400 N |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.