Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NN3018 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFNN 3018 TN3/SP90 × 140 × 37 mm | FAGNN3018-D-K-TVP-SP-XL90 × 140 × 37 mm | KOYONN301890 × 140 × 37 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | NN 3018 TN3/SP | NN3018-D-K-TVP-SP-XL | NN3018 |
| Product family | Super-precision cylindrical roller bearings | — | Single-row / NN / Cylindrical bore |
| Detailed type | Super-precision double row cylindrical roller bearing | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NN3018 | — |
| Bore diameterd | 90 mm | 90 mm | 90 mm |
| Outside diameterD | 140 mm | 140 mm | 140 mm |
| WidthB | 37 mm | 37 mm | 37 mm |
| Basic dynamic load ratingC | 138 kN | 162 kN | 179 kN |
| Basic static load ratingC0 | 216 kN | 216 kN | 228 kN |
| Fatigue load limitPu | 26 kN | 33.5 kN | 29.3 kN |
| Limiting speednG | — | — | 4200 r/min |
| Mass≈m | 1.99 kg | 1.903 kg | 2.07 kg |
| Precision class | — | SP — Tolerance class SP | — |
| Internal clearance | C1 | C1 (Group 1) — Internal clearance smaller than C2 | — |
| Sealing | Without | — | — |
| Cage | Non-metallic | TVP — Plastic cage | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 120 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Cylindrical roller bearings - Single-row - NN - Cylindrical bore |
| Official Classification 1 | — | — | Cylindrical roller bearings / Single-row / NN / Cylindrical bore |
| Dimensions | |||
| Minimum chamfer dimensionr1 min | — | 1.5 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.059 in | — |
| Raceway diameter outer ringE | — | 127 mm | — |
| Raceway diameter outer ringE | — | 5 in | — |
| Axial displacements | — | 2.5 mm | — |
| Axial displacements | — | 0.098 in | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | min. 98 mm | — | — |
| Abutment diameter housingD a | max. 132 mm | — | — |
| Fillet radiusr a | max. 1.5 mm | — | — |
| Oil nozzle position (not for variants with TNHA cage)d n | 125.7 mm | — | — |
| Engineering — Calculation data | |||
| Attainable speed for grease lubrication | 8000.0 r/min | — | — |
| Attainable speed for oil-air lubrication | 9200.0 r/min | — | — |
| Recommended grease quantityG rec | 6.1 cm³ | — | — |
| Static radial stiffness (guideline value) | 2010 N/µm | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter inner ring (NN design)d 1 | 109.4 mm | — | — |
| Raceway diameter outer ring (NN design)E | 127 mm | — | — |
| Chamfer dimension outer ringr 1,2 | min. 1.5 mm | — | — |
| Permissible axial displacement from the normal position of one bearing ring relative to the other (all)s | max. 2 mm | — | — |
| Engineering — Engineering specifications | |||
| Bore type | Cylindrical | — | — |
| Logistics | |||
| Product net weight | 1.99 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 162,000 N | — |
| Basic dynamic load rating, radialCr | — | 36,420.863 lbf | — |
| Basic static load rating, radialC0r | — | 216,000 N | — |
| Basic static load rating, radialC0r | — | 48,561.151 lbf | — |
| Fatigue load limit, radialCur | — | 33,500 N | — |
| Fatigue load limit, radialCur | — | 7,531.475 lbf | — |
| Limiting speed for grease lubricationnG Grease | — | 7,600 1/min | — |
| Limiting speed for oil lubricationnG Oil | — | 8,900 1/min | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 374771 | — |
| Official Class Key | — | — | 040-020-010 |
| Base Type | — | NN3018 | — |
| Gpsd Group | — | F07 | — |
| Product Line Id | — | 39 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0866500840000 | — |
| Base product | — | 230509014D | — |
| Bearing X designation | — | NN3018-D-K-TVP-SP-XL | — |
| Mounting Manager ID | — | NN3018-D-K-TVP-SP-XL | — |
| Mounting dimensions | |||
| Diameter shaft shoulderda | — | 105 mm | — |
| Diameter shaft shoulderda | — | 4.134 in | — |
| Diameter shaft shoulder tolerance | — | h12 | — |
| Diameter of housing shoulderDa | — | 129.8 mm | — |
| Diameter of housing shoulderDa | — | 5.11 in | — |
| Shoulder diameter outer ring clearance | — | H12 | — |
| Injection pitch diameter minEtk 1 nom | — | 124.9 mm | — |
| Injection pitch diameter minEtk 1 nom | — | 4.917 in | — |
| Maximum recess radiusra1 max | — | 1.5 mm | — |
| Maximum recess radiusra1 max | — | 0.059 in | — |
| Product characteristics | |||
| Tolerance classSP | — | Tolerance class SP | — |
| Bore typeK | — | Tapered, taper 1:12 | — |
| Change markD | — | Internal Variant D | — |
| Radial internal clearanceC1 (Group 1) | — | Internal clearance smaller than C2 | — |
| Number of rows2 | — | Double-row design | — |
| Product identity | |||
| Official product category | Super-precision cylindrical roller bearings | — | — |
| Official taxonomy path | /products/super-precision-bearings/cylindrical-roller-bearings | — | — |
| Structure group ID | BC2_010 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Super precision cylindrical roller bearings NN30..-D-K-TVP-SP, Non-locating bearing, double row, with tapered bore, taper 1:12, separable, with cage | — |
| Short Description | — | Cylindrical roller bearing | — |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Number of rows | 2 | — | — |
| Design | NN | — | — |
| Number of flanges, outer ring | 0 | — | — |
| Number of flanges, inner ring | 3 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | C1 | — | — |
| Tolerance class | Class SP (SP) | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 7.4 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 140 mm |
| B | — | — | 37 mm |
| R(Min.) | — | — | 1.5 mm |
| Bore Diameter (D) | — | 90 mm | — |
| Fw | — | — | - mm |
| Outside Diamater (D) | — | 140 mm | — |
| Ew | — | — | 127 mm |
| Total Width (B) | — | 37 mm | — |
| Basic Load Ratings : Cr | — | — | 179 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 162,000 N | — |
| Basic Load Ratings : C0R | — | — | 228 kN |
| Basic Static Load Rating, Radial (C0R) | — | 216,000 N | — |
| Fatigue Load Limit : Cu | — | — | 29.3 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speeds(Grease Lub.) | — | — | 4200 min-1 |
| Limiting Speed For Grease Lubrication (Ng Grea) | — | 7,600 1/min | — |
| Limiting Speeds(Oil Lub.) | — | — | 5100 min-1 |
| Minimum Diameter Shaft Shoulder (Da) | — | 105 mm | — |
| Da(Min.) | — | — | 129 mm |
| Limiting Speed (Ng Oil) | — | 8,900 1/min | — |
| Da(Max.) | — | — | 132 mm |
| Operating Temperature Max. (Tmax) | — | 120 °C | — |
| Db(Min.) | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 129.8 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.5 mm | — |
| Ra(Max.) | — | — | 1.5 mm |
| Axial Displacement (S) | — | 2.5 mm | — |
| Mass(Refer.) | — | — | 2.07 kg |
| Injection Pitch Diameter Min (Etk 1 N) | — | 124.9 mm | — |
| Maximum Recess Radius (Ra1 Max) | — | 1.5 mm | — |
| Raceway Diameter Outer Ring (E) | — | 127 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 33,500 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 120 °C | — |
| Operating temperature max.Tmax | — | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.