Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NJ1032 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFNJ 1032 ML/C3160 × 240 × 38 mm | FAGNJ1032-XL-M1160 × 240 × 38 mm | NSKNJ1032160 × 240 × 38 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | NSK |
| Designation | NJ 1032 ML/C3 | NJ1032-XL-M1 | NJ1032 |
| Product family | Cylindrical roller bearings | — | Cylindrical roller bearing |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ1032 | — |
| Bore diameterd | 160 mm | 160 mm | 160 mm |
| Outside diameterD | 240 mm | 240 mm | 240 mm |
| WidthB | 38 mm | 38 mm | 38 mm |
| Basic dynamic load ratingC | 265 kN | 290 kN | 292 kN |
| Basic static load ratingC0 | 325 kN | 355 kN | 340 kN |
| Fatigue load limitPu | — | 54 kN | — |
| Reference speednref | 3000 r/min | 3000 r/min | — |
| Limiting speednG | 4800 r/min | 5400 r/min | — |
| Mass≈m | 6.05 kg | 6 kg | — |
| Precision class | — | PN — Normal (ISO 492:2023) | — |
| Internal clearance | C3 | CN (Group N) — Normal internal clearance | — |
| Sealing | Without | — | — |
| Cage | Machined brass | M1 — Two Piece Brass Cage Roller Guided | Machined brass |
| Lubricant | None | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 150 °C | — |
| Boundary dimensions | |||
| Bearing widthB | — | — | 38 mm |
| Minimum bearing chamferr min. | — | — | 2.1 mm |
| Minimum secondary bearing chamferr1 min. | — | — | 1.5 mm |
| Roller inscribed circle diameterFw | — | — | 180 mm |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Catalogue reference mass | |||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 5.81 kg |
| Construction | |||
| Single-row construction type | — | — | NJ |
| Rib arrangement | — | — | Two outer-ring ribs; one inner-ring rib |
| Standard cage material | — | — | Machined brass |
| Standard cage marking | — | — | M is usually omitted for this series |
| Other cage codes listed for this catalogue row | — | — | None listed in this row |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 2.1 mm | — |
| Minimum chamfer dimensionrmin | — | 0.083 in | — |
| Minimum chamfer dimensionr1 min | — | 1.5 mm | — |
| Minimum chamfer dimensionr1 min | — | 0.059 in | — |
| Axial displacements | — | 4.3 mm | — |
| Axial displacements | — | 0.169 in | — |
| Raceway diameter outer ringE | — | 220 mm | — |
| Raceway diameter outer ringE | — | 8.661 in | — |
| Raceway diameter inner ringF | — | 180 mm | — |
| Raceway diameter inner ringF | — | 7.087 in | — |
| Minimum rib diameter outer ringD1 min | — | 212.9 mm | — |
| Minimum rib diameter outer ringD1 min | — | 8.382 in | — |
| Maximum rib diameter inner ringd1 | — | 187.8 mm | — |
| Maximum rib diameter inner ringd1 | — | 7.394 in | — |
| Load ratings — standard cage | |||
| Basic dynamic radial load ratingCr | — | — | 292000 N |
| Basic static radial load ratingC0r | — | — | 340000 N |
| Logistics | |||
| Product net weight | 6.05 kg | — | — |
| eClass code | 23-05-09-01 | — | — |
| UNSPSC code | 31171505 | — | — |
| Lubrication-qualified speed — standard cage | |||
| Thermal speed rating — oil bath | — | — | 3400 r/min |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row |
| Limiting speed — grease | — | — | 2600 r/min |
| Limiting speed — oil bath | — | — | 3200 r/min |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 290,000 N | — |
| Basic dynamic load rating, radialCr | — | 65,197.842 lbf | — |
| Basic static load rating, radialC0r | — | 355,000 N | — |
| Basic static load rating, radialC0r | — | 79,811.151 lbf | — |
| Fatigue load limit, radialCur | — | 54,000 N | — |
| Fatigue load limit, radialCur | — | 12,140.288 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 372189 | — |
| Base Type | — | NJ1032 | — |
| Old Designation | — | ["NJ1032-M1"] | — |
| Gpsd Group | — | F01 | — |
| Product Line Id | — | 63 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0192204640000 | — |
| Base product | — | 2305090111 | — |
| Bearing X designation | — | NJ1032-XL-M1 | — |
| Mounting Manager ID | — | NJ1032-XL-M1 | — |
| Grease application ID | — | NJ1032-XL-M1 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 168 mm | — |
| Minimum diameter shaft shoulderda min | — | 6.614 in | — |
| Maximum diameter of shaft shoulderda max | — | 178 mm | — |
| Maximum diameter of shaft shoulderda max | — | 7.008 in | — |
| Maximum diameter of housing shoulderDa max | — | 230 mm | — |
| Maximum diameter of housing shoulderDa max | — | 9.055 in | — |
| Minimum shaft shoulderdc min | — | 189 mm | — |
| Minimum shaft shoulderdc min | — | 7.441 in | — |
| Maximum recess radiusra max | — | 2 mm | — |
| Maximum recess radiusra max | — | 0.079 in | — |
| Mounting dimensions — shown arrangement | |||
| Minimum shaft shoulder diameterdb min. | — | — | 168 mm |
| Maximum housing shoulder diameterDa max. | — | — | 229 mm |
| Maximum adjusting-ring diameter (NU/NJ arrangement)db max. | — | — | 178 mm |
| Maximum adjacent fillet radiusra max. | — | — | 2 mm |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 1.5 mm |
| Performance | |||
| SKF performance class | SKF Explorer | — | — |
| Product characteristics | |||
| Design | — | Standard | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Number of rows1 | — | Single-row design | — |
| Product identity | |||
| Official product category | Cylindrical roller bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — |
| Structure group ID | BC1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Cylindrical roller bearing NJ..-XL-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | — |
| Short Description | — | Cylindrical roller bearing | — |
| Properties | |||
| Bearing part | Complete bearing | — | — |
| Axial displacement capability | In one direction | — | — |
| Number of rows | 1 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Number of flanges, outer ring | 2 | — | — |
| Number of flanges, inner ring | 1 | — | — |
| Loose flange | None | — | — |
| Radial internal clearance | C3 | — | — |
| Tolerance class | Normal | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 22.4 kg CO 2 e | — | — |
| Technical Data | |||
| Bore Diameter (D) | — | 160 mm | — |
| Outside Diamater (D) | — | 240 mm | — |
| Total Width (B) | — | 38 mm | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 290,000 N | — |
| Basic Static Load Rating, Radial (C0R) | — | 355,000 N | — |
| Raceway Diameter Inner Ring (F) | — | 180 mm | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Minimum Diameter Shaft Shoulder (Da) | — | 168 mm | — |
| Operating Temperature Max. (Tmax) | — | 150 °C | — |
| Limiting Speed (Limiting Spe) | — | 5,400 1/min | — |
| Minimum Shaft Shoulder (Dc Min) | — | 189 mm | — |
| Reference Speed (Nϑr) | — | 3,000 1/min | — |
| Maximum Recess Radius (Ra Max) | — | 2 mm | — |
| Maximum Diameter Of Housing Shoulder (Da) | — | 230 mm | — |
| Maximum Rib Diameter Inner Ring (D1) | — | 187.8 mm | — |
| Minimum Chamfer Dimension (R1 Min) | — | 1.5 mm | — |
| Axial Displacement (S) | — | 4.3 mm | — |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 212.9 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 178 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2.1 mm | — |
| Raceway Diameter Outer Ring (E) | — | 220 mm | — |
| Fatigue Load Limit, Radial (Cur) | — | 54,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 150 °C | — |
| Operating temperature max.Tmax | — | 302 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.