Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NA4852 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFNA 4852260 × 320 × 60 mm | INANA4852-XL260 × 320 × 60 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | NA 4852 | NA4852-XL |
| Product family | Needle roller bearings | — |
| Detailed type | Single row needle roller bearing with machined rings, with flanges | Needle roller bearings |
| Series | — | NA4852 |
| Bore diameterd | 260 mm | 260 mm |
| Outside diameterD | 320 mm | 320 mm |
| WidthB | 60 mm | 60 mm |
| Basic dynamic load ratingC | 358 kN | 415 kN |
| Basic static load ratingC0 | 1200 kN | 1160 kN |
| Fatigue load limitPu | 118 kN | 161 kN |
| Reference speednref | 1400 r/min | 870 r/min |
| Limiting speednG | 1500 r/min | 1660 r/min |
| Mass≈m | 10.6 kg | 10.584 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Cage | Sheet metal | — |
| Bearing material | Bearing steel | — |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Engineering — Abutment dimensions | ||
| Smallest permissible abutment diameter shaft, bearings with flangesd a | min. 269 mm | — |
| Diameter of housing abutmentD a | max. 311 mm | — |
| Fillet radiusr a | max. 2 mm | — |
| Engineering — Dimensions | ||
| Raceway diameter inner ringF | 285 mm | — |
| Chamfer dimension outer ringr 1,2 | min. 2 mm | — |
| Permissible axial displacement from the normal position of one bearing ring relative to the others | max. 2 mm | — |
| Logistics | ||
| Product net weight | 10.6 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 393240 |
| Base Type | — | NA4852 |
| Old Designation | — | ["NA4852"] |
| Gpsd Group | — | I01 |
| Product Line Id | — | 09 |
| X Life Marking | — | XL |
| Product identity | ||
| Official product category | Needle roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/needle-roller-bearings/needle-roller-bearings-with-machined-rings | — |
| Structure group ID | BN1_003 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Needle roller bearing NA..-XL, single row, with inner ring, outer ring with 2 bords |
| Short Description | — | Needle roller bearing |
| Properties | ||
| Bearing part | Complete bearing | — |
| Number of rows | 1 | — |
| Outer ring type | Machined (solid) | — |
| Aligning feature | Without | — |
| Number of flanges, outer ring | 2 | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | With | — |
| Indicative carbon footprint for new product | 39.2 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 260 mm |
| Outside Diamater (D) | — | 320 mm |
| Total Width (B) | — | 60 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 415,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 1,160,000 N |
| Raceway Diameter Inner Ring (F) | — | 285 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Limiting Speed (Limiting Spe) | — | 1,660 1/min |
| Reference Speed (Nϑr) | — | 870 1/min |
| Axial Displacement (S) | — | 2 mm |
| Minimum Chamfer Dimension (Rmin) | — | 2 mm |
| Fatigue Load Limit, Radial (Cur) | — | 161,000 N |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.