Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare N228 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
4 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGN228-E-XL-M1140 × 250 × 42 mm | TIMKENN228EMBC3140 × 250 × 42 mm | NSKN228W140 × 250 × 42 mm | KOYON228140 × 250 × 42 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | FAG | TIMKEN | NSK | KOYO |
| Designation | N228-E-XL-M1 | N228EMBC3 | N228W | N228 |
| Product family | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | N228 | EX27549 | — | — |
| Bore diameterd | 140 mm | 140 mm | 140 mm | 140 mm |
| Outside diameterD | 250 mm | 250 mm | 250 mm | 250 mm |
| WidthB | 42 mm | 42 mm | 42 mm | 42 mm |
| Basic dynamic load ratingC | 460 kN | 443 kN | 365 kN | 406 kN |
| Basic static load ratingC0 | 510 kN | 526 kN | 375 kN | 421 kN |
| Fatigue load limitPu | 79 kN | — | — | 55.5 kN |
| Limiting speednG | — | — | — | 2400 r/min |
| Mass≈m | 9.54 kg | 9 kg | — | — |
| Precision class | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | — | Open | — | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Pressed steel | — |
| Minimum operating temperatureTmin | -30 °C | — | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 42 mm | — |
| Minimum bearing chamferr min. | — | — | 3 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 3 mm | — |
| Roller circumscribed circle diameterEw | — | — | 221 mm | — |
| Calculation Factors | ||||
| K Factor | — | 0.00 | — | — |
| Y1 Factor | — | 0.00 | — | — |
| Y2 Factor | — | 0.00 | — | — |
| Y0 Factor | — | 0.00 | — | — |
| E Factor | — | 0.00 | — | — |
| Cg Factor | — | 0.1213 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | Yes | — | — | — |
| Suitable for grease lubrication | Yes | — | — | — |
| Suitable for oil lubrication | Yes | — | — | — |
| Unsealed design | Yes | — | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 8.08 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Pressed steel | — |
| Standard cage marking | — | — | W | — |
| Other cage codes listed for this catalogue row | — | — | M | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionr1 min | 3 mm | — | — | — |
| Minimum chamfer dimensionr1 min | 0.118 in | — | — | — |
| Axial displacements1 | 3.8 mm | — | — | — |
| Axial displacements1 | 0.15 in | — | — | — |
| Raceway diameter outer ringE | 225 mm | — | — | — |
| Raceway diameter outer ringE | 8.858 in | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 365000 N | — |
| Basic static radial load ratingC0r | — | — | 375000 N | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 3400 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 2000 r/min | — |
| Limiting speed — oil bath | — | — | 2400 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | 460,000 N | — | — | — |
| Basic dynamic load rating, radialCr | 103,417.266 lbf | — | — | — |
| Basic static load rating, radialC0r | 510,000 N | — | — | — |
| Basic static load rating, radialC0r | 114,658.273 lbf | — | — | — |
| Fatigue load limit, radialCur | 79,000 N | — | — | — |
| Fatigue load limit, radialCur | 17,760.791 lbf | — | — | — |
| Limiting speed for grease lubricationnG Grease | 4,150 1/min | — | — | — |
| Limiting speed for oil lubricationnG Oil | 4,900 1/min | — | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | 367630 | — | — | — |
| Material Number | — | 000000000190028482 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | N228 | — | — | — |
| World Assembly Part Number | — | N228EMB | — | — |
| Gpsd Group | F01 | — | — | — |
| Inner Ring Part Number | — | 140ARNE02 | — | — |
| Product Line Id | 63 | — | — | — |
| Outer Ring Part Number | — | 140ERNE02 | — | — |
| Drawing Number | — | M944824 | — | — |
| Upc | — | 0013992131546 | — | — |
| Official Source System | — | CORE BP - DS DF | — | — |
| Official Last Run | — | 2026-08-23T20:02:47.753 | — | — |
| SAP material number | 0192179350000 | — | — | — |
| Base product | 2305090101 | — | — | — |
| Bearing X designation | N228-E-XL-M1 | — | — | — |
| Mounting Manager ID | N228-E-XL-M1 | — | — | — |
| Grease application ID | N228-E-XL-M1 | — | — | — |
| Mounting dimensions | ||||
| Diameter shaft shoulderda | 154 mm | — | — | — |
| Diameter shaft shoulderda | 6.063 in | — | — | — |
| Diameter of housing shoulderDa | 236 mm | — | — | — |
| Diameter of housing shoulderDa | 9.291 in | — | — | — |
| Maximum recess radiusra1 max | 2.5 mm | — | — | — |
| Maximum recess radiusra1 max | 0.098 in | — | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 153 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 237 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 225 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 2.5 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 2.5 mm | — |
| Product characteristics | ||||
| Tolerance classPN | Normal (ISO 492:2023) | — | — | — |
| Change markE | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — | — |
| Number of rows1 | Single-row design | — | — | — |
| Product Identity | ||||
| Construction | Cylindrical roller bearing N2..-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N2 | Single Row Cylindrical Roller Bearing | Imperial Series | 5.5118 in Bore | 9.8425 in OD | 1.6535 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C3 Clearance | — | — |
| Short Description | Cylindrical roller bearing | — | — | — |
| Type Description | — | Cylindrical 1-Row | — | — |
| Number Of Rows | — | 1 | — | — |
| Tapered Bore | — | N | — | — |
| Technical Data | ||||
| d | — | — | — | 250 mm |
| Bore Diameter (D) | 140 mm | — | — | — |
| B | — | — | — | 42 mm |
| Outside Diamater (D) | 250 mm | — | — | — |
| R(Min.) | — | — | — | 3 mm |
| Total Width (B) | 42 mm | — | — | — |
| Overall Width | — | 0.000 mm | — | — |
| R1(Min.) | — | — | — | 3 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 460,000 N | — | — | — |
| Radial Rating | — | 443,000 N | — | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 510,000 N | — | — | — |
| Axial Rating | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | 406 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — | — |
| Dynamic Rating C1 | — | 443,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 421 kN |
| Limiting Speed For Grease Lubrication (Ng Grea) | 4,150 1/min | — | — | — |
| Dynamic Rating C90 | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 55.5 kN |
| Minimum Diameter Shaft Shoulder (Da) | 154 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2400 min-1 |
| Limiting Speed (Ng Oil) | 4,900 1/min | — | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2900 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — | — | — |
| Static Radial Rating C0 | — | 526,000 N | — | — |
| Sd1 | — | — | — | - mm |
| Axial Displacement (S1) | 3.8 mm | — | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — | — |
| B1 | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 236 mm | — | — | — |
| Static Axial Rating C0A | — | 0 N | — | — |
| B2 | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 3 mm | — | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | 2.5 mm | — | — | — |
| Dc(Min.) | — | — | — | - mm |
| Raceway Diameter Outer Ring (E) | 225 mm | — | — | — |
| Dd(Min.) | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | 79,000 N | — | — | — |
| Da(Max.) | — | — | — | 237 mm |
| Db(Max.) | — | — | — | - mm |
| Db(Min.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 2.5 mm |
| Rb(Max.) | — | — | — | 2.5 mm |
| Temperature range | ||||
| Operating temperature min.Tmin | -30 °C | — | — | — |
| Operating temperature min.Tmin | -22 °F | — | — | — |
| Operating temperature max.Tmax | 150 °C | — | — | — |
| Operating temperature max.Tmax | 302 °F | — | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.