Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare KR35 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFKR 35Cam follower (stud-type track roller) with relubrication feature | INAKR3516 × 35 × 52 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | KR 35 | KR35 |
| Product family | Cam followers (Stud-type track rollers) | — |
| Detailed type | Cam follower (stud-type track roller) with relubrication feature | Stud type track roller |
| Bore diameterd | — | 16 mm |
| Outside diameterD | 35 mm | 35 mm |
| WidthB | — | 52 mm |
| Basic dynamic load ratingC | 8.58 kN | 9.7 kN |
| Basic static load ratingC0 | 12.9 kN | 14.5 kN |
| Fatigue load limitPu | 1.5 kN | 1.86 kN |
| Limiting speednG | 3800 r/min | 3600 r/min |
| Mass≈m | 0.198 kg | 0.163 kg |
| Internal clearance | Between C2 and CN | — |
| Sealing | Seal on both sides | — |
| Cage | With | — |
| Bearing material | Bearing steel | — |
| Lubricant | Grease | — |
| Dimensions | ||
| Functional outside diameter | 35.0 mm | — |
| Stud diameter | 16.0 mm | — |
| Length | 52.1 mm | — |
| Width, outer ring | 18.0 mm | — |
| Engineering — Calculation data | ||
| Maximum dynamic radial loadsF r | max. 11 kN | — |
| Maximum static radial loadsF 0r | max. 15.6 kN | — |
| Engineering — Dimensions | ||
| Attachment diameterd | 16 mm | — |
| Total lengthB | 52.1 mm | — |
| Width outer ringC | 18 mm | — |
| Length shank on studB 1 | 32.5 mm | — |
| Distance lubrication hole to flange ringB 2 | 8 mm | — |
| Distance face outer ring to face side washerC 1 | 0.8 mm | — |
| Outside diameter flange ringd 1 | 27.34 mm | — |
| Thread studG | M16x1.5 | — |
| Length threadG 1 | 17 mm | — |
| Seat diameter for lubrication accessoriesM | 4 mm | — |
| Diameter of lubrication hole (shank)M 1 | 3 mm | — |
| Width across flatsSW | 8 mm | — |
| Engineering — Included products | ||
| Grease fitting | NIP B1.5x5 | — |
| Hexagonal nut | M 16x1.5 | — |
| Engineering — Mounting information | ||
| Recommended tightening torque | 58 N·m | — |
| Logistics | ||
| Product net weight | 0.198 kg | — |
| eClass code | 23-05-09-03 | — |
| UNSPSC code | 31171512 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 399474 |
| Base Type | — | KR35 |
| Gpsd Group | — | I03 |
| Product Line Id | — | 13 |
| X Life Marking | — | n.r. |
| Product identity | ||
| Official product category | Cam followers (Stud-type track rollers) | — |
| Official taxonomy path | /products/rolling-bearings/track-rollers/cam-followers | — |
| Structure group ID | BNT_004 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Stud type track rollers KR..-B, single row needle roller bearings with particularly thick-walled outer ring, needle roller and cage assembly and a solid roller stud with fixing thread and a mounting aid, axial guidance of outer ring is provided by the contact flange and contact washer, gap seals on both sides, without eccentric collar |
| Short Description | — | Stud type track roller |
| Properties | ||
| Rolling elements | Needle rollers | — |
| Number of rows | 1 | — |
| Outer ring profile | Crowned | — |
| Stud alignment | Centric | — |
| Number of flanges, outer ring | 2 | — |
| Feature for tightening | Hexagonal recess | — |
| Radial internal clearance | Between C2 and CN | — |
| Tolerance class | Other | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Sealing type | Gap-type | — |
| Relubrication feature | Centre of each stud end and radial hole in stud shank | — |
| Technical Data | ||
| Fit Diameter Of Roller Stud / Stud (D1) | — | 16 mm |
| Outside Diamater (D) | — | 35 mm |
| Total Width (B) | — | 52 mm |
| Basic Dynamic Load Rating, Radial (Cr W) | — | 9,700 N |
| Basic Static Load Rating, Radial (C0R W) | — | 14,500 N |
| Speed On Permanent Grease Lubrication (Nd G) | — | 3,600 1/min |
| Distance To Lubrication Hole (B3) | — | 8 mm |
| Bolt/Stud Length Effectively (B2) | — | 32.5 mm |
| Width Of Flats (W) | — | 8 mm |
| Diameter Lubrication Hole (D3) | — | 3 mm |
| Width, Outer Ring (C) | — | 18 mm |
| Protrusion Outer Ring To Thrust Washer (C1) | — | 0.8 mm |
| Thread Length (Ig) | — | 17 mm |
| Stop Diameter Of Thrust Washer (D2) | — | 27.6 mm |
| Maximum Witdh Of Thrust Washer (B1) | — | 19.6 mm |
| Radius Of Outer Ring Outside Profile (R) | — | 500 mm |
| Tightening Torque Nut (Ma) | — | 58 Nm |
| Fatigue Load Limit, Radial (Cur W) | — | 1,860 N |
| Minimum Chamfer Dimension (Rmin) | — | 0.6 mm |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.