Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare KLM102949 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGKLM102949-LM10291045.242 × 73.431 × 19.558 mm | TIMKENKLM102949N / KLM10291045.242 × 73.431 × 19.558 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | KLM102949-LM102910 | KLM102949N / KLM102910 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | LM102900 |
| Bore diameterd | 45.242 mm | 45.242 mm |
| Outside diameterD | 73.431 mm | 73.431 mm |
| WidthB | 19.558 mm | 19.558 mm |
| Basic dynamic load ratingC | 57 kN | 72.9 kN |
| Basic static load ratingC0 | 79 kN | 81.8 kN |
| Fatigue load limitPu | 9.7 kN | — |
| Reference speednref | 5600 r/min | — |
| Limiting speednG | 9700 r/min | — |
| Mass≈m | 0.316 kg | 0.31 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.91 |
| Y1 Factor | — | 1.97 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 1.08 |
| E Factor | — | 0.31 |
| Cg Factor | — | 0.0744 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.31 | — |
| Dynamic axial load factorY | 1.97 | — |
| Static axial load factorY0 | 1.08 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.142 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.8 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.031 in | — |
| Distance between the apexes of the pressure conesa | 15 mm | — |
| Distance between the apexes of the pressure conesa | 0.591 in | — |
| Guidance rib diameter of inner ringd1 | 60 mm | — |
| Guidance rib diameter of inner ringd1 | 2.362 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 19.812 mm | — |
| Width, inner ringB | 0.78 in | — |
| Width, outer ringC | 15.748 mm | — |
| Width, outer ringC | 0.62 in | — |
| Width, totalT | 19.558 mm | — |
| Width, totalT | 0.77 in | — |
| Basic dynamic load rating, radialCr | 57,000 N | — |
| Basic dynamic load rating, radialCr | 12,814.748 lbf | — |
| Basic static load rating, radialC0r | 79,000 N | — |
| Basic static load rating, radialC0r | 17,760.791 lbf | — |
| Fatigue load limit, radialCur | 9,700 N | — |
| Fatigue load limit, radialCur | 2,180.755 lbf | — |
| Thermal speed ratingnϑr | 5,600 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1753059 | — |
| Material Number | — | 190051167190051096 |
| Base Type | KLM102949-LM102910 | — |
| World Assembly Part Number | — | KLM102949N / KLM102910 |
| Product Line Id | 36 | — |
| Inner Ring Part Number | — | KLM102949N |
| Outer Ring Part Number | — | KLM102910 |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Base product | 2305091001 | — |
| Bearing X designation | KLM102949-LM102910 | — |
| Mounting Manager ID | KLM102949-LM102910 | — |
| Grease application ID | KLM102949-LM102910 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 50 mm | — |
| Maximum diameter of shaft shoulderda max | 1.969 in | — |
| Minimum diameter of shaft shoulderdb min | 56 mm | — |
| Minimum diameter of shaft shoulderdb min | 2.205 in | — |
| Minimum diameter of housing shoulderDa min | 68 mm | — |
| Minimum diameter of housing shoulderDa min | 2.677 in | — |
| Minimum diameter of housing shoulderDb min | 70 mm | — |
| Minimum diameter of housing shoulderDb min | 2.756 in | — |
| Minimum axial spaceCa min | 3 mm | — |
| Minimum axial spaceCa min | 0.118 in | — |
| Minimum axial spaceCb min | 3.8 mm | — |
| Minimum axial spaceCb min | 0.15 in | — |
| Maximum fillet radius of shaftra max | 3.6 mm | — |
| Maximum fillet radius of shaftra max | 0.142 in | — |
| Maximum fillet radius of housingrb max | 0.8 mm | — |
| Maximum fillet radius of housingrb max | 0.031 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings K-Series, in inch sizes, separable | — |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 45.242 mm | — |
| Overall Width | — | 21.612 mm |
| Outside Diameter (D) | 73.431 mm | — |
| Radial Rating | — | 18,900 N |
| Width (B) | 19.558 mm | — |
| Axial Rating | — | 9,870 N |
| Basic Dynamic Load Rating, Radial (Cr) | 57,000 N | — |
| Dynamic Rating C1 | — | 72,900 N |
| Basic Static Load Rating, Radial (C0R) | 79,000 N | — |
| Dynamic Rating C90 | — | 18,900 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 9,870 N |
| Limiting Speed (Ng) | 9,700 1/min | — |
| Dynamic Axial Rating Ca1 | — | 38,100 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Static Radial Rating C0 | — | 81,800 N |
| Reference Speed (Nϑr) | 5,600 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 0.8 mm | — |
| Static Axial Rating C0A | — | 72,700 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 0.8 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 68 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 70 mm | — |
| Width, Outer Ring (C) | 15.748 mm | — |
| Fatigue Load Limit, Radial (Cur) | 9,700 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.31 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 50 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 56 mm | — |
| Dynamic Axial Load Factor (Y) | 1.97 | — |
| Maximum Fillet Radius (Ra Max) | 3.6 mm | — |
| Minimum Axial Space (Cb Min) | 3.8 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 60 mm | — |
| Minimum Axial Space (Ca Min) | 3 mm | — |
| Width, Inner Ring (B) | 19.812 mm | — |
| Static Axial Load Factor (Y0) | 1.08 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 15 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.