Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare KL812148 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGKL812148-L81211166.675 × 103.213 × 17.602 mm | TIMKENKL812148 / KL81211166.675 × 103.213 × 17.602 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | KL812148-L812111 | KL812148 / KL812111 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | L812100 |
| Bore diameterd | 66.675 mm | 66.675 mm |
| Outside diameterD | 103.213 mm | 103.213 mm |
| WidthB | 17.602 mm | 17.602 mm |
| Basic dynamic load ratingC | 58 kN | 82.9 kN |
| Basic static load ratingC0 | 71 kN | 89.1 kN |
| Fatigue load limitPu | 8.3 kN | — |
| Reference speednref | 3950 r/min | — |
| Limiting speednG | 7000 r/min | — |
| Mass≈m | 0.478 kg | 0.51 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.20 |
| Y1 Factor | — | 1.23 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.68 |
| E Factor | — | 0.49 |
| Cg Factor | — | 0.0864 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.49 | — |
| Dynamic axial load factorY | 1.23 | — |
| Static axial load factorY0 | 0.68 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 1.5 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.059 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.8 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.031 in | — |
| Distance between the apexes of the pressure conesa | 21 mm | — |
| Distance between the apexes of the pressure conesa | 0.827 in | — |
| Guidance rib diameter of inner ringd1 | 84.5 mm | — |
| Guidance rib diameter of inner ringd1 | 3.327 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 17.602 mm | — |
| Width, inner ringB | 0.693 in | — |
| Width, outer ringC | 11.989 mm | — |
| Width, outer ringC | 0.472 in | — |
| Width, totalT | 17.602 mm | — |
| Width, totalT | 0.693 in | — |
| Basic dynamic load rating, radialCr | 58,000 N | — |
| Basic dynamic load rating, radialCr | 13,039.568 lbf | — |
| Basic static load rating, radialC0r | 71,000 N | — |
| Basic static load rating, radialC0r | 15,962.23 lbf | — |
| Fatigue load limit, radialCur | 8,300 N | — |
| Fatigue load limit, radialCur | 1,866.007 lbf | — |
| Thermal speed ratingnϑr | 3,950 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2267733 | — |
| Material Number | — | 190057647190057637 |
| Base Type | KL812148-L812111 | — |
| World Assembly Part Number | — | KL812148 / KL812111 |
| Product Line Id | 36 | — |
| Inner Ring Part Number | — | KL812148 |
| Outer Ring Part Number | — | KL812111 |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Base product | 2305091001 | — |
| Bearing X designation | KL812148-L812111 | — |
| Mounting Manager ID | KL812148-L812111 | — |
| Grease application ID | KL812148-L812111 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 72 mm | — |
| Maximum diameter of shaft shoulderda max | 2.835 in | — |
| Minimum diameter of shaft shoulderdb min | 74 mm | — |
| Minimum diameter of shaft shoulderdb min | 2.913 in | — |
| Minimum diameter of housing shoulderDa min | 96 mm | — |
| Minimum diameter of housing shoulderDa min | 3.78 in | — |
| Minimum diameter of housing shoulderDb min | 99 mm | — |
| Minimum diameter of housing shoulderDb min | 3.898 in | — |
| Minimum axial spaceCa min | 3.5 mm | — |
| Minimum axial spaceCa min | 0.138 in | — |
| Minimum axial spaceCb min | 5.5 mm | — |
| Minimum axial spaceCb min | 0.217 in | — |
| Maximum fillet radius of shaftra max | 1.5 mm | — |
| Maximum fillet radius of shaftra max | 0.059 in | — |
| Maximum fillet radius of housingrb max | 0.8 mm | — |
| Maximum fillet radius of housingrb max | 0.031 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Internal design | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings K-Series, in inch sizes, separable | — |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 66.675 mm | — |
| Overall Width | — | 19.602 mm |
| Outside Diameter (D) | 103.213 mm | — |
| Radial Rating | — | 21,500 N |
| Width (B) | 17.602 mm | — |
| Axial Rating | — | 17,900 N |
| Basic Dynamic Load Rating, Radial (Cr) | 58,000 N | — |
| Dynamic Rating C1 | — | 82,900 N |
| Basic Static Load Rating, Radial (C0R) | 71,000 N | — |
| Dynamic Rating C90 | — | 21,500 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 17,900 N |
| Limiting Speed (Ng) | 7,000 1/min | — |
| Dynamic Axial Rating Ca1 | — | 69,200 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Static Radial Rating C0 | — | 89,100 N |
| Reference Speed (Nϑr) | 3,950 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 0.8 mm | — |
| Static Axial Rating C0A | — | 127,000 N |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 0.8 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 96 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 99 mm | — |
| Width, Outer Ring (C) | 11.989 mm | — |
| Fatigue Load Limit, Radial (Cur) | 8,300 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.49 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 72 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 74 mm | — |
| Dynamic Axial Load Factor (Y) | 1.23 | — |
| Maximum Fillet Radius (Ra Max) | 1.5 mm | — |
| Minimum Axial Space (Cb Min) | 5.5 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 1.5 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 84.5 mm | — |
| Minimum Axial Space (Ca Min) | 3.5 mm | — |
| Width, Inner Ring (B) | 17.602 mm | — |
| Static Axial Load Factor (Y0) | 0.68 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 21 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.