Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare KH913849 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGKH913849-H91381069.85 × 146.05 × 41.275 mm | TIMKENKH913849 / KH91381069.85 × 146.05 × 41.275 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | KH913849-H913810 | KH913849 / KH913810 |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | H913800 |
| Bore diameterd | 69.85 mm | 69.85 mm |
| Outside diameterD | 146.05 mm | 146.05 mm |
| WidthB | 41.275 mm | 41.275 mm |
| Basic dynamic load ratingC | 199 kN | 273 kN |
| Basic static load ratingC0 | 236 kN | 256 kN |
| Fatigue load limitPu | 29 kN | — |
| Reference speednref | 4250 r/min | — |
| Limiting speednG | 4800 r/min | — |
| Mass≈m | 2.91 kg | 2.88 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 0.75 |
| Y1 Factor | — | 0.77 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.42 |
| E Factor | — | 0.78 |
| Cg Factor | — | 0.0872 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.78 | — |
| Dynamic axial load factorY | 0.77 | — |
| Static axial load factorY0 | 0.42 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.142 in | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 3.3 mm | — |
| Minimum chamfer dimension of outer ring back facer3, 4 min | 0.13 in | — |
| Distance between the apexes of the pressure conesa | 45.4 mm | — |
| Distance between the apexes of the pressure conesa | 1.787 in | — |
| Guidance rib diameter of inner ringd1 | 107 mm | — |
| Guidance rib diameter of inner ringd1 | 4.213 in | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 39.688 mm | — |
| Width, inner ringB | 1.563 in | — |
| Width, outer ringC | 25.4 mm | — |
| Width, outer ringC | 1 in | — |
| Width, totalT | 41.275 mm | — |
| Width, totalT | 1.625 in | — |
| Basic dynamic load rating, radialCr | 199,000 N | — |
| Basic dynamic load rating, radialCr | 44,739.209 lbf | — |
| Basic static load rating, radialC0r | 236,000 N | — |
| Basic static load rating, radialC0r | 53,057.554 lbf | — |
| Fatigue load limit, radialCur | 29,000 N | — |
| Fatigue load limit, radialCur | 6,519.784 lbf | — |
| Thermal speed ratingnϑr | 4,250 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1789996 | — |
| Material Number | — | 190040183190001419 |
| Base Type | KH913849-H913810 | — |
| World Assembly Part Number | — | KH913849 / KH913810 |
| Gpsd Group | F04 | — |
| Inner Ring Part Number | — | KH913849 |
| Product Line Id | 64 | — |
| Outer Ring Part Number | — | KH913810 |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| SAP material number | 0382807870000 | — |
| Base product | 2305091001 | — |
| Bearing X designation | KH913849-H913810 | — |
| Mounting Manager ID | KH913849-H913810 | — |
| Grease application ID | KH913849-H913810 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 82 mm | — |
| Maximum diameter of shaft shoulderda max | 3.228 in | — |
| Minimum diameter of shaft shoulderdb min | 95 mm | — |
| Minimum diameter of shaft shoulderdb min | 3.74 in | — |
| Minimum diameter of housing shoulderDa min | 124 mm | — |
| Minimum diameter of housing shoulderDa min | 4.882 in | — |
| Maximum diameter of housing shoulderDa max | 134 mm | — |
| Maximum diameter of housing shoulderDa max | 5.276 in | — |
| Minimum diameter of housing shoulderDb min | 138 mm | — |
| Minimum diameter of housing shoulderDb min | 5.433 in | — |
| Minimum axial spaceCa min | 5 mm | — |
| Minimum axial spaceCa min | 0.197 in | — |
| Minimum axial spaceCb min | 12.5 mm | — |
| Minimum axial spaceCb min | 0.492 in | — |
| Maximum fillet radius of shaftra max | 3.6 mm | — |
| Maximum fillet radius of shaftra max | 0.142 in | — |
| Maximum fillet radius of housingrb max | 3.3 mm | — |
| Maximum fillet radius of housingrb max | 0.13 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings K-Series, in inch sizes, separable | — |
| Type Description | — | TS - Tapered Single |
| Short Description | Tapered roller bearing | — |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Overall Width | — | 44.288 mm |
| Bore Diameter (D) | 69.85 mm | — |
| Radial Rating | — | 70,700 N |
| Outside Diameter (D) | 146.05 mm | — |
| Axial Rating | — | 94,700 N |
| Width (B) | 41.275 mm | — |
| Dynamic Rating C1 | — | 273,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | 199,000 N | — |
| Dynamic Rating C90 | — | 70,700 N |
| Basic Static Load Rating, Radial (C0R) | 236,000 N | — |
| Dynamic Axial Rating Ca90 | — | 94,700 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca1 | — | 365,000 N |
| Limiting Speed (Ng) | 4,800 1/min | — |
| Static Radial Rating C0 | — | 256,000 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Reference Speed (Nϑr) | 4,250 1/min | — |
| Static Axial Rating C0A | — | 583,000 N |
| Maximum Fillet Radius Of Housing (Rb Max) | 3.3 mm | — |
| Minimum Chamfer Dimension Of Outer Ring Back Face (R3, 4 M) | 3.3 mm | — |
| Minimum Diameter Of Housing Shoulder (Da Min) | 124 mm | — |
| Minimum Diameter Of Housing Shoulder (Db Min) | 138 mm | — |
| Width, Outer Ring (C) | 25.4 mm | — |
| Fatigue Load Limit, Radial (Cur) | 29,000 N | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.78 | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 82 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 95 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 134 mm | — |
| Dynamic Axial Load Factor (Y) | 0.77 | — |
| Maximum Fillet Radius (Ra Max) | 3.6 mm | — |
| Minimum Axial Space (Cb Min) | 12.5 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 107 mm | — |
| Minimum Axial Space (Ca Min) | 5 mm | — |
| Width, Inner Ring (B) | 39.688 mm | — |
| Static Axial Load Factor (Y0) | 0.42 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 45.4 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.