Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare GE15 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFGE 15 C15 × 26 × 12 mm | INAGE15-DO15 × 26 × 12 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | INA |
| Designation | GE 15 C | GE15-DO |
| Product family | Radial spherical plain bearings | — |
| Detailed type | Radial spherical plain bearing, maintenance-free, metric sizes | Spherical plain bearings |
| Bore diameterd | 15 mm | 15 mm |
| Outside diameterD | 26 mm | 26 mm |
| WidthB | 12 mm | 12 mm |
| Basic dynamic load ratingC | 18 kN | 21.9 kN |
| Basic static load ratingC0 | 45 kN | 84.2 kN |
| Mass≈m | 0.025 kg | 0.026 kg |
| Sealing | Without | — |
| Minimum operating temperatureTmin | — | -60 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Dimensions | ||
| Width, inner ring | 12.0 mm | — |
| Width, outer ring | 9.0 mm | — |
| Engineering — Abutment dimensions | ||
| Abutment diameter shaftd a | max. 18.4 mm | — |
| Abutment diameter housingD a | max. 24.5 mm | — |
| Fillet radius shaftr a | max. 0.3 mm | — |
| Fillet radius housingr b | max. 0.3 mm | — |
| Engineering — Calculation data | ||
| Specific dynamic load factorK | 100 N/mm² | — |
| Specific static load factorK 0 | 250 N/mm² | — |
| Material constantK M | 1400 | — |
| Engineering — Dimensions | ||
| Width outer ringC | 9 mm | — |
| Angle of tiltα | 8 ° | — |
| Raceway diameter inner ringd k | 22 mm | — |
| Chamfer dimension borer 1 | min. 0.3 mm | — |
| Chamfer dimension outer ringr 2 | min. 0.3 mm | — |
| Engineering — Engineering specifications | ||
| Maintenance | Maintenance-free | — |
| Sliding contact surface combination | Steel/PTFE sintered bronze | — |
| Material, inner ring | Bearing steel | — |
| Material, outer ring | Steel | — |
| Logistics | ||
| Product net weight | 0.025 kg | — |
| eClass code | 23-05-01-06 | — |
| UNSPSC code | 31171515 | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 347848 |
| Base Type | — | GE15-DO |
| Gpsd Group | — | I05 |
| Product Line Id | — | 31 |
| Product identity | ||
| Official product category | Radial spherical plain bearings | — |
| Official taxonomy path | /products/plain-bearings/spherical-plain-bearings-rod-ends/radial | — |
| Structure group ID | BLR_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Radial spherical plain bearing, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-1, dimension series E, open design High-performance: For highest load rating and lifetime demands |
| Short Description | — | Spherical plain bearing |
| Properties | ||
| Relubrication feature | Without | — |
| Technical Data | ||
| Bore Diameter Bearing (D) | — | 15 mm |
| Outside Diameter Bearing (D) | — | 26 mm |
| Width Inner Ring (B) | — | 12 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 21,900 N |
| Basic Static Load Rating, Radial (C0R) | — | 84,200 N |
| Operating Temperature Min. (Tmin) | — | -60 °C |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Housing Connection Diameter (Da Min) | — | 21 mm |
| Width Inner Ring, Upper Tolerance (Bot) | — | 0 mm |
| Edge Spacing (R1Smin) | — | 0.3 mm |
| Outside Diameter, Upper Tolerance (Dot) | — | 0 mm |
| Bore Diameter Bearing, Upper Tolerance (Dot) | — | 0 mm |
| Radial Clearance, Maximum (Grmax) | — | 0.082 mm |
| Radial Clearance, Minimum (Grmin) | — | 0.04 mm |
| Width, Outer Ring (C) | — | 9 mm |
| Width Outer Ring, Lower Tolerance (Cot) | — | -0.24 mm |
| Edge Spacing (R2Smin) | — | 0.3 mm |
| Ball Diameter (Dk) | — | 22 mm |
| Width Outer Ring, Upper Tolerance (Cut) | — | 0 mm |
| Bore Diameter Bearing, Lower Tolerance (Dut) | — | -0.008 mm |
| Tilt Angle (Α) | — | 8 ° |
| Width Inner Ring, Lower Tolerance (But) | — | -0.12 mm |
| Connection Measure Inner Ring (Da Max) | — | 18.4 mm |
| Outside Diameter, Lower Tolerance (Dut) | — | -0.009 mm |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.