Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare C3152 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFC 3152260 × 440 × 144 mm | FAGC3152-XL-K-M260 × 440 × 144 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | C 3152 | C3152-XL-K-M |
| Product family | CARB toroidal roller bearings | — |
| Detailed type | Carb toroidal roller bearing | Toroidal roller bearing |
| Series | — | C3152 |
| Bore diameterd | 260 mm | 260 mm |
| Outside diameterD | 440 mm | 440 mm |
| WidthB | 144 mm | 144 mm |
| Basic dynamic load ratingC | 2650 kN | 2750 kN |
| Basic static load ratingC0 | 4050 kN | 4250 kN |
| Fatigue load limitPu | 325 kN | 435 kN |
| Reference speednref | 1100 r/min | 740 r/min |
| Limiting speednG | 1500 r/min | 1480 r/min |
| Mass≈m | 86.6 kg | 86.8 kg |
| Internal clearance | CN | — |
| Sealing | Without | — |
| Cage | Sheet metal | M — Solid brass cage, ball guided |
| Lubricant | None | — |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Calculation factors | ||
| Operating clearance factor kδkδ | — | 0.667 |
| Tilting factor kφkφ | — | 16.222 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Unsealed design | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 4 mm |
| Minimum chamfer dimensionrmin | — | 0.157 in |
| Shoulder diameter of IRd2 | — | 318.9 mm |
| Shoulder diameter of IRd2 | — | 12.555 in |
| Shoulder diameter outer ringD1 | — | 397.3 mm |
| Shoulder diameter outer ringD1 | — | 15.642 in |
| Axial displacementS1 | — | 26.4 mm |
| Axial displacementS1 | — | 1.039 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | max. 341 mm | — |
| Diameter of housing abutmentD a | min. 371 mm | — |
| Abutment diameter housingD a | max. 423 mm | — |
| Minimum width of space required in housingC a | min. 4.1 mm | — |
| Radius of filletr a | max. 3 mm | — |
| Engineering — Calculation data | ||
| SKF performance class | SKF Explorer | — |
| Misalignment factork 1 | 0.12 | — |
| Internal clearance factork 2 | 0.1 | — |
| Engineering — Dimensions | ||
| Shoulder diameter of inner ringd 2 | ≈ 314 mm | — |
| Shoulder or recess diameter of outer ringD 1 | ≈ 394 mm | — |
| Permissible axial displacements 1 | max. 26.4 mm | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — |
| Engineering — Engineering specifications | ||
| Bore type | Cylindrical | — |
| Logistics | ||
| Product net weight | 86.6 kg | — |
| eClass code | 23-05-09-13 | — |
| UNSPSC code | 31171505 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 2,750,000 N |
| Basic dynamic load rating, radialCr | — | 618,255.396 lbf |
| Basic static load rating, radialC0r | — | 4,250,000 N |
| Basic static load rating, radialC0r | — | 955,485.612 lbf |
| Fatigue load limit, radialCur | — | 435,000 N |
| Fatigue load limit, radialCur | — | 97,796.763 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 1663167 |
| Base Type | — | C3152 |
| Gpsd Group | — | F03 |
| Product Line Id | — | 78 |
| X Life Marking | — | XL |
| SAP material number | — | 0937950410000 |
| Base product | — | 2305091390 |
| Bearing X designation | — | C3152-XL-K-M |
| Mounting Manager ID | — | C3152-XL-K-M |
| Grease application ID | — | C3152-XL-K-M |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 277 mm |
| Minimum diameter shaft shoulderda min | — | 10.906 in |
| Maximum diameter shaft shoulderda max | — | 346 mm |
| Maximum diameter shaft shoulderda max | — | 13.622 in |
| Minimum diameter of housing shoulderDa min | — | 377 mm |
| Minimum diameter of housing shoulderDa min | — | 14.843 in |
| Maximum diameter of housing shoulderDa max | — | 423 mm |
| Maximum diameter of housing shoulderDa max | — | 16.654 in |
| Maximum fillet radiusra max | — | 3 mm |
| Maximum fillet radiusra max | — | 0.118 in |
| Minimum depth of free space CaCa | — | 1.1 mm |
| Minimum depth of free space CaCa | — | 0.043 in |
| Product characteristics | ||
| Bore typeK | — | Tapered, taper 1:12 |
| Product identity | ||
| Official product category | CARB toroidal roller bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/carb-toroidal-roller-bearings | — |
| Structure group ID | BSC_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Toroidal roller bearing C31..-XL-K-M |
| Short Description | — | Toroidal roller bearing |
| Properties | ||
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Radial internal clearance | CN | — |
| Tolerance class | Normal | — |
| Relubrication feature | Without | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 320.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 107.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 260 mm |
| Outside Diameter (D) | — | 440 mm |
| Width (B) | — | 144 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 2,750,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 4,250,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 1,480 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 740 1/min |
| Minimum Diameter Of Housing Shoulder (Da Min) | — | 377 mm |
| Axial Displacement (S1) | — | 26.4 mm |
| Minimum Depth Of Free Space Ca (Ca) | — | 1.1 mm |
| Operating Clearance Factor Kδ (Kδ) | — | 0.667 |
| Shoulder Diameter Of Ir (D2) | — | 318.9 mm |
| Tilting Factor Kφ (Kφ) | — | 16.222 |
| Fatigue Load Limit, Radial (Cur) | — | 435,000 N |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 346 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 277 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 423 mm |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm |
| Maximum Fillet Radius (Ra Max) | — | 3 mm |
| Shoulder Diameter Outer Ring (D1) | — | 397.3 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.