Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 7092 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF7092 AM460 × 680 × 100 mm | FAG7092-MP-P5460 × 680 × 100 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 7092 AM | 7092-MP-P5 |
| Product family | Angular contact ball bearings | — |
| Detailed type | Single row angular contact ball bearing | Angular contact ball bearings |
| Series | — | 7092 |
| Bore diameterd | 460 mm | 460 mm |
| Outside diameterD | 680 mm | 680 mm |
| WidthB | 100 mm | 100 mm |
| Basic dynamic load ratingC | 689 kN | 720 kN |
| Basic static load ratingC0 | 1460 kN | 1640 kN |
| Fatigue load limitPu | 25.5 kN | 36 kN |
| Reference speednref | 950 r/min | 820 r/min |
| Limiting speednG | 950 r/min | 1320 r/min |
| Mass≈m | 118 kg | 118.6 kg |
| Precision class | Normal | P5 — Class 5 (ISO 492:2023) |
| Sealing | Without | Without — Not sealed |
| Cage | Machined brass | MP — Solid brass cage, ball guided |
| Bearing material | Bearing steel | — |
| Lubricant | None | Without — Bearing not greased |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Dimensions | ||
| Contact angle | 30.0 ° | — |
| Minimum chamfer dimensionrmin | — | 6 mm |
| Minimum chamfer dimensionrmin | — | 0.236 in |
| Minimum chamfer dimensionr1 min | — | 3 mm |
| Minimum chamfer dimensionr1 min | — | 0.118 in |
| Shoulder diameter on outer ring wide side faceD1 | — | 600.05 mm |
| Shoulder diameter on outer ring wide side faceD1 | — | 23.624 in |
| Shoulder diameter on inner ring wide side faced1 | — | 544.5 mm |
| Shoulder diameter on inner ring wide side faced1 | — | 21.437 in |
| Distance between the apexes of the pressure conesa | — | 214.5 mm |
| Distance between the apexes of the pressure conesa | — | 8.445 in |
| Contact angleα | — | 30 ° |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 483 mm | — |
| Abutment diameter housingD a | max. 657 mm | — |
| Diameter of housing abutmentD b | max. 667 mm | — |
| Radius of filletr a | max. 5 mm | — |
| Radius of filletr b | max. 2.5 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 16.2 | — |
| Minimum radial load factork r | 0.09 | — |
| Limiting valuee | 0.8 | — |
| Engineering — Calculation data — Bearing pair arranged back-to-back or face-to-face | ||
| Calculation factor (back-to-back, face-to-face)X | 0.63 | — |
| Calculation factor (back-to-back, face-to-face)Y 0 | 0.66 | — |
| Calculation factor (back-to-back, face-to-face)Y 1 | 0.78 | — |
| Calculation factor (back-to-back, face-to-face)Y 2 | 1.2 | — |
| Engineering — Calculation data — Single bearing or bearing pair arranged in tandem | ||
| Calculation factor (single, tandem)X | 0.39 | — |
| Calculation factor (single, tandem)Y 0 | 0.33 | — |
| Calculation factor (single, tandem)Y 2 | 0.76 | — |
| Engineering — Dimensions | ||
| Deviation limits of mid-range bore diametert Δdmp | -0.045 to 0 mm | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.075 to 0 mm | — |
| Deviation limits of ring widtht ΔBs | -0.45 to 0 mm | — |
| Shoulder diameter of inner ring (large side face)d 1 | ≈ 547 mm | — |
| Shoulder diameter of inner ring (small side face)d 2 | ≈ 505.75 mm | — |
| Shoulder diameter of outer ring (large side face)D 1 | ≈ 607.3 mm | — |
| Distance side face to pressure pointa | 215 mm | — |
| Chamfer dimensionr 1,2 | min. 6 mm | — |
| Chamfer dimensionr 3,4 | min. 3 mm | — |
| ISO tolerance class for dimensions | Normal | — |
| Engineering — Tolerances of run-out | ||
| Range of section height at inner ring of assembled bearingt Kia | 65 µm | — |
| Range of section height at outer ring of assembled bearingt Kea | 120 µm | — |
| ISO tolerance class for geometrical tolerances | Normal | — |
| Logistics | ||
| Product net weight | 118.0 kg | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 720,000 N |
| Basic dynamic load rating, radialCr | — | 161,870.504 lbf |
| Basic static load rating, radialC0r | — | 1,640,000 N |
| Basic static load rating, radialC0r | — | 368,705.036 lbf |
| Fatigue load limit, radialCur | — | 36,000 N |
| Fatigue load limit, radialCur | — | 8,093.525 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 359079 |
| Base Type | — | 7092 |
| Old Designation | — | ["7092MP.P5"] |
| Gpsd Group | — | S03 |
| Product Line Id | — | 14 |
| SAP material number | — | 0191132500000 |
| Base product | — | 2305080301 |
| Bearing X designation | — | 7092-MP-P5 |
| Mounting Manager ID | — | 7092-MP-P5 |
| Grease application ID | — | 7092-MP-P5 |
| Mounting dimensions | ||
| Minimum diameter of shaft shoulderda min | — | 483 mm |
| Minimum diameter of shaft shoulderda min | — | 19.016 in |
| Maximum diameter of housing shoulderDa max | — | 657 mm |
| Maximum diameter of housing shoulderDa max | — | 25.866 in |
| Maximum diameter of housing shoulderDb max | — | 667.6 mm |
| Maximum diameter of housing shoulderDb max | — | 26.283 in |
| Maximum fillet radius of shaftra max | — | 5 mm |
| Maximum fillet radius of shaftra max | — | 0.197 in |
| Maximum fillet radius of housingra1 max | — | 2.5 mm |
| Maximum fillet radius of housingra1 max | — | 0.098 in |
| Product characteristics | ||
| Type of SealWithout | — | Not sealed |
| Tolerance classP5 | — | Class 5 (ISO 492:2023) |
| Dimensional / heat stabilizationS1 | — | Rings dimensional stabilized up to 200° |
| Product identity | ||
| Official product category | Angular contact ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/single-row-angular-contact-ball-bearings | — |
| Structure group ID | BA1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Angular contact ball bearing 70..-MP, single row, solid brass cage |
| Short Description | — | Angular contact ball bearing |
| Properties | ||
| Contact type | Normal contact (two-point contact) | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Ring type | One-piece inner and outer rings | — |
| Matched arrangement | No | — |
| Axial internal clearance | Not applicable | — |
| Tolerance class | Normal | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 437.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 460 mm |
| Outside Diameter (D) | — | 680 mm |
| Width (B) | — | 100 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 720,000 N |
| Basic Static Load Rating, Radial (C0R) | — | 1,640,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 1,320 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 820 1/min |
| Maximum Diameter Of Housing Shoulder (Db Max) | — | 667.6 mm |
| Fatigue Load Limit, Radial (Cur) | — | 36,000 N |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 483 mm |
| Shoulder Diameter Inner Ring (D1) | — | 544.5 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 657 mm |
| Minimum Chamfer Dimension (Rmin) | — | 6 mm |
| Maximum Fillet Radius (Ra Max) | — | 5 mm |
| Maximum Recess Radius (Ra1 Max) | — | 2.5 mm |
| Shoulder Diameter Outer Ring (D1) | — | 600.05 mm |
| Minimum Chamfer Dimension (R1 Min) | — | 3 mm |
| Contact Angle (Α) | — | 30 ° |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 214.5 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.