Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 696 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
4 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG696>N6 × 15 × 5 mm | NSK6966 × 15 × 5 mm | KOYO6966 × 15 × 5 mm | EZO6966 × 15 × 5 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | FAG | NSK | KOYO | EZO |
| Designation | 696>N | 696 | 696 | 696 |
| Product family | — | Single row deep groove ball bearings | Extra-small, miniature ball bearings / Standard type / Open | Miniature Ball Bearing |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | 696 | — | — | — |
| Bore diameterd | 6 mm | 6 mm | 6 mm | 6 mm |
| Outside diameterD | 15 mm | 15 mm | 15 mm | 15 mm |
| WidthB | 5 mm | 5 mm | 5 mm | 5 mm |
| Basic dynamic load ratingC | 1.56 kN | 1.91 kN | 1.7 kN | 1.34 kN |
| Basic static load ratingC0 | 0.6 kN | 0.67 kN | 0.52 kN | 0.517 kN |
| Fatigue load limitPu | 0.0375 kN | — | 0.01 kN | — |
| Reference speednref | 40000 r/min | — | — | — |
| Limiting speednG | 65000 r/min | — | 45000 r/min | — |
| Mass≈m | 0.003 kg | 0.00388 kg | 0.003 kg | 0.00344 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | Without — Not sealed | Open | Open | Open (no closure suffix in this catalogue marking) |
| Cage | JN — Steel sheet metal | — | — | — |
| Bearing material | — | — | — | High-carbon chromium bearing steel |
| Lubricant | Without — Bearing not greased | — | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — | — |
| Boundary dimensions | ||||
| Bearing width (open)B | — | 5 mm | — | — |
| Outer diameterD | — | — | — | 15 mm |
| Minimum bearing chamferr min. | — | 0.2 mm | — | — |
| Outer diameterD | — | — | — | 0.5906 inch |
| Inner ring widthB | — | — | — | 5 mm |
| Inner ring widthB | — | — | — | 0.1969 inch |
| Outer ring widthC | — | — | — | 5 mm |
| Outer ring widthC | — | — | — | 0.1969 inch |
| Inner ring chamfer dimensionr si min | — | — | — | 0.2 mm |
| Inner ring chamfer dimensionr si min | — | — | — | 0.0079 inch |
| Outer ring chamfer dimensionr se min | — | — | — | 0.2 mm |
| Outer ring chamfer dimensionr se min | — | — | — | 0.0079 inch |
| Calculation factors | ||||
| Calculation factorf0 | 13.2 | — | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | Yes | — | — | — |
| Axial load capacity in one direction | Yes | — | — | — |
| Axial load capacity in both directions | Yes | — | — | — |
| Suitable for grease lubrication | Yes | — | — | — |
| Suitable for oil lubrication | Yes | — | — | — |
| Unsealed design | Yes | — | — | — |
| Classification | ||||
| Official Category Path | — | — | Deep groove ball bearings - Extra-small, miniature ball bearings - Standard type - Open | — |
| Official Classification 1 | — | — | Deep groove ball bearings / Extra-small, miniature ball bearings / Standard type / Open | — |
| Construction | ||||
| Catalogue closure construction | — | Open | — | — |
| Closure interpretation | — | — | — | Open (no closure suffix in this catalogue marking) |
| Material interpretation | — | — | — | High-carbon chromium bearing steel |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | 0.2 mm | — | — | — |
| Minimum chamfer dimensionrmin | 0.008 in | — | — | — |
| Shoulder diameter outer ringD1 | 12.5 mm | — | — | — |
| Shoulder diameter outer ringD1 | 0.492 in | — | — | — |
| Caliber diameter outer ringD2 | 13.5 mm | — | — | — |
| Caliber diameter outer ringD2 | 0.531 in | — | — | — |
| Shoulder diameter inner ringd1 | 8.6 mm | — | — | — |
| Shoulder diameter inner ringd1 | 0.339 in | — | — | — |
| Load ratings | ||||
| Basic dynamic radial load ratingCr | — | 1910 N | — | — |
| Basic static radial load ratingC0r | — | 670 N | — | — |
| Lubrication-qualified speed | ||||
| Limiting speed with grease | — | 40000 r/min | — | — |
| Limiting speed with oil (open) | — | 45000 r/min | — | — |
| Catalogue limiting speed (grease) | — | — | — | 46000 r/min |
| Catalogue limiting speed (oil) | — | — | — | 54000 r/min |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | 1,560 N | — | — | — |
| Basic dynamic load rating, radialCr | 350.719 lbf | — | — | — |
| Basic static load rating, radialC0r | 600 N | — | — | — |
| Basic static load rating, radialC0r | 134.892 lbf | — | — | — |
| Fatigue load limit, radialCur | 37.5 N | — | — | — |
| Fatigue load limit, radialCur | 8.431 lbf | — | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | 2898259 | — | — | — |
| Official Class Key | — | — | 010-020-010 | — |
| Base Type | 696 | — | — | — |
| Gpsd Group | S02 | — | — | — |
| Product Line Id | 14 | — | — | — |
| SAP material number | 0976763730000 | — | — | — |
| Base product | 2305080101 | — | — | — |
| Mounting dimensions | ||||
| Minimum shaft shoulder diameter (open)da min. | — | 7.6 mm | — | — |
| Maximum adjacent fillet radiusra max. | — | 0.2 mm | — | — |
| Maximum housing shoulder diameter (open)Da max. | — | 13.4 mm | — | — |
| Adjacent mounting dimension (da min)da min | — | — | — | 13.1 mm |
| Adjacent mounting dimension (da min)da min | — | — | — | 0.5157 inch |
| Adjacent mounting dimension (da max)da max | — | — | — | 13.4 mm |
| Adjacent mounting dimension (da max)da max | — | — | — | 0.5276 inch |
| Adjacent mounting dimension (r asi max)r asi max | — | — | — | 0.2 mm |
| Adjacent mounting dimension (r asi max)r asi max | — | — | — | 0.0079 inch |
| Adjacent mounting dimension (r ase max)r ase max | — | — | — | 0.2 mm |
| Adjacent mounting dimension (r ase max)r ase max | — | — | — | 0.0079 inch |
| Minimum diameter shaft shoulderda min | 7.4 mm | — | — | — |
| Minimum diameter shaft shoulderda min | 0.291 in | — | — | — |
| Maximum diameter of housing shoulderDa max | 13.6 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | 0.535 in | — | — | — |
| Maximum fillet radiusra max | 0.2 mm | — | — | — |
| Maximum fillet radiusra max | 0.008 in | — | — | — |
| Product characteristics | ||||
| Version code>N | Not marked on bearing | — | — | — |
| Type of SealWithout | Not sealed | — | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — | — |
| Dimensional / heat stabilizationSN | Rings dimensional stabilized up to 120° | — | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — | — |
| Bore typeZ | Cylindrical | — | — | — |
| Product Identity | ||||
| Construction | Deep groove ball bearing 69, single row, steel sheet metal cage | — | — | — |
| Short Description | Deep groove ball bearing | — | — | — |
| Reference mass | ||||
| Approximate catalogue mass (open) | — | 3.88 g | — | — |
| Reference mass | — | — | — | 3.44 g |
| Rolling elements | ||||
| Ball diameterDw | — | — | — | 2.381 mm |
| Ball quantityZ | — | — | — | 7 |
| Technical Data | ||||
| d | — | — | 15 mm | — |
| B | — | — | 5 mm | — |
| Bore Diameter (D) | 6 mm | — | — | — |
| R(Min.) | — | — | 0.2 mm | — |
| Outside Diameter (D) | 15 mm | — | — | — |
| Basic Load Ratings : Cr | — | — | 1.70 kN | — |
| Width (B) | 5 mm | — | — | — |
| Basic Load Ratings : C0R | — | — | 0.52 kN | — |
| Basic Dynamic Load Rating, Radial (Cr) | 1,560 N | — | — | — |
| Fatigue Load Limit : Cu | — | — | 0.010 kN | — |
| Basic Static Load Rating, Radial (C0R) | 600 N | — | — | — |
| Factor : F0 | — | — | 12.4 | — |
| Operating Temperature Min. (Tmin) | -30 °C | — | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 45000 min-1 | — |
| Limiting Speed (Ng) | 65,000 1/min | — | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 54000 min-1 | — |
| Operating Temperature Max. (Tmax) | 120 °C | — | — | — |
| Da(Min.) | — | — | 7.6 mm | — |
| Reference Speed (Nϑr) | 40,000 1/min | — | — | — |
| Da(Max.) | — | — | 13.4 mm | — |
| Calculation Factor (F0) | 13.2 | — | — | — |
| Ra(Max.) | — | — | 0.2 mm | — |
| Fatigue Load Limit, Radial (Cur) | 37.5 N | — | — | — |
| Mass(Refer.) | — | — | 3.9 g | — |
| Minimum Diameter Shaft Shoulder (Da Min) | 7.4 mm | — | — | — |
| Shoulder Diameter Inner Ring (D1) | 8.6 mm | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 13.6 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | 0.2 mm | — | — | — |
| Maximum Fillet Radius (Ra Max) | 0.2 mm | — | — | — |
| Shoulder Diameter Outer Ring (D1) | 12.5 mm | — | — | — |
| Caliber Diameter Outer Ring (D1) | 13.5 mm | — | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | -30 °C | — | — | — |
| Operating temperature min.Tmin | -22 °F | — | — | — |
| Operating temperature max.Tmax | 120 °C | — | — | — |
| Operating temperature max.Tmax | 248 °F | — | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.