Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 6910 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | NSK691050 × 72 × 12 mm | KOYO691050 × 72 × 12 mm | NACHI691050 × 72 × 12 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | NSK | KOYO | NACHI |
| Designation | 6910 | 6910 | 6910 |
| Product family | Single row deep groove ball bearings | Single-row / Open type | Deep groove ball bearing |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Bore diameterd | 50 mm | 50 mm | 50 mm |
| Outside diameterD | 72 mm | 72 mm | 72 mm |
| WidthB | 12 mm | 12 mm | 12 mm |
| Basic dynamic load ratingC | 16 kN | 18.2 kN | 18.3 kN |
| Basic static load ratingC0 | 11.7 kN | 11.7 kN | 11.7 kN |
| Fatigue load limitPu | — | 0.64 kN | — |
| Limiting speednG | — | 9000 r/min | — |
| Mass≈m | 0.135 kg | 0.133 kg | 0.125 kg |
| Sealing | Open | Open | Open |
| Boundary dimensions | |||
| Bearing widthB | 12 mm | — | 12 mm |
| Minimum bearing chamferr min. | 0.6 mm | — | 0.6 mm |
| Classification | |||
| Official Category Path | — | Deep groove ball bearings - Single-row - Open type | — |
| Official Classification 1 | — | Deep groove ball bearings / Single-row / Open type | — |
| Construction | |||
| Closure arrangement | — | — | Open |
| Listed closure suffix | — | — | None (open type) |
| Catalogue closure construction | Open | — | — |
| Equivalent-load factors | |||
| Catalogue load calculation factorf0 | — | — | 16.1 |
| Load ratings | |||
| Basic dynamic radial load ratingCr | 16000 N | — | 18300 N |
| Basic static radial load ratingC0r | 11700 N | — | 11700 N |
| Equivalent-load calculation factorf0 | 16.1 | — | — |
| Lubrication-qualified speed | |||
| Limiting speed with grease | 9000 r/min | — | — |
| Limiting speed with oil (open bearing) | 11000 r/min | — | — |
| Limiting speed with grease (open) | — | — | 9500 r/min |
| Limiting speed with oil (open) | — | — | 11000 r/min |
| Manufacturer Identity | |||
| Official Class Key | — | 010-010-010 | — |
| Mounting dimensions | |||
| Minimum shaft shoulder diameterda min. | 54 mm | — | 54 mm |
| Maximum shaft shoulder diameterda max. | 55 mm | — | — |
| Maximum housing shoulder diameterDa max. | 68 mm | — | 68 mm |
| Maximum adjacent fillet radiusra max. | — | — | 0.6 mm |
| Maximum shaft or housing fillet radiusra max. | 0.6 mm | — | — |
| Reference mass | |||
| Catalogue row mass (variants not individually specified) | — | — | 0.125 kg |
| Approximate catalogue mass (open reference) | 0.135 kg | — | — |
| Technical Data | |||
| d | — | 72 mm | — |
| B | — | 12 mm | — |
| R(Min.) | — | 0.6 mm | — |
| Basic Load Ratings : Cr | — | 18.2 kN | — |
| Basic Load Ratings : C0R | — | 11.7 kN | — |
| Fatigue Load Limit : Cu | — | 0.640 kN | — |
| Factor : F0 | — | 16.1 | — |
| Limiting Speeds(Grease Lub.) | — | 9000 min-1 | — |
| Limiting Speeds(Oil Lub.) | — | 11000 min-1 | — |
| Da(Min.) | — | 54 mm | — |
| Da(Max.) | — | 68 mm | — |
| Ra(Max.) | — | 0.6 mm | — |
| Mass(Refer.) | — | 0.133 kg | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.