Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 62205 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF62205-2RS125 × 52 × 18 mm | FAG62205-A-2RSR25 × 52 × 18 mm | TIMKEN62205-2RS25 × 52 × 18 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | TIMKEN |
| Designation | 62205-2RS1 | 62205-A-2RSR | 62205-2RS |
| Product family | Deep groove ball bearings | — | Radial Deep-Groove Ball |
| Detailed type | Deep groove ball bearing with seals or shields | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 62205 | 62000 |
| Bore diameterd | 25 mm | 25 mm | 25 mm |
| Outside diameterD | 52 mm | 52 mm | 52 mm |
| WidthB | 18 mm | 18 mm | 18 mm |
| Basic dynamic load ratingC | 14 kN | 14.9 kN | 14 kN |
| Basic static load ratingC0 | 7.8 kN | 7.9 kN | 7.88 kN |
| Fatigue load limitPu | 0.335 kN | 0.54 kN | — |
| Limiting speednG | 8500 r/min | 7900 r/min | — |
| Mass≈m | 0.155 kg | 0.154 kg | 0.15 kg |
| Precision class | Normal | PN — Normal (ISO 492:2023) | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — |
| Sealing | Seal on both sides | 2RSR — Contact seal on both sides | Sealed |
| Cage | Sheet metal | JN — Steel sheet metal | Steel cage |
| Bearing material | Bearing steel | — | — |
| Lubricant | Grease | Lubricating grease | — |
| Minimum operating temperatureTmin | — | -20 °C | — |
| Maximum operating temperatureTmax | — | 100 °C | — |
| Calculation Factors | |||
| K Factor | — | — | 0.00 |
| Y1 Factor | — | — | 0.00 |
| Y2 Factor | — | — | 0.00 |
| Y0 Factor | — | — | 0.50 |
| E Factor | — | — | 0.00 |
| Cg Factor | — | — | 0.0287 |
| Calculation factors | |||
| Calculation factorf0 | — | 13.9 | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Lifetimelubricationfreedomfrommaintenance | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Sealedonbothsides | — | Yes | — |
| Dimensions | |||
| Minimum chamfer dimensionrmin | — | 1 mm | — |
| Minimum chamfer dimensionrmin | — | 0.039 in | — |
| Shoulder diameter outer ringD1 | — | 44.05 mm | — |
| Shoulder diameter outer ringD1 | — | 1.734 in | — |
| Caliber diameter outer ringD2 | — | 46.3 mm | — |
| Caliber diameter outer ringD2 | — | 1.823 in | — |
| Shoulder diameter inner ringd1 | — | 33.95 mm | — |
| Shoulder diameter inner ringd1 | — | 1.337 in | — |
| Caliber diameter inner ringd2 | — | 31.8 mm | — |
| Caliber diameter inner ringd2 | — | 1.252 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | max. 34.3 mm | — | — |
| Diameter of housing abutmentD a | max. 46.4 mm | — | — |
| Radius of shaft or housing filletr a | max. 1 mm | — | — |
| Engineering — Calculation data | |||
| Minimum load factork r | 0.03 | — | — |
| Calculation factorf 0 | 14 | — | — |
| Engineering — Dimensions | |||
| Deviation limits of mid-range bore diametert Δdmp | -0.01 to 0 mm | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.013 to 0 mm | — | — |
| Deviation limits of ring widtht ΔBs | -0.12 to 0 mm | — | — |
| Shoulder diameterd 1 | ≈ 34.35 mm | — | — |
| Recess diameterD 2 | ≈ 46.21 mm | — | — |
| Chamfer dimensionr 1,2 | min. 1 mm | — | — |
| ISO tolerance class for dimensions | Normal | — | — |
| Engineering — Tolerances of run-out | |||
| Range of section height at inner ring of assembled bearingt Kia | 13 µm | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 25 µm | — | — |
| ISO tolerance class for geometrical tolerances | Normal | — | — |
| Logistics | |||
| Product net weight | 0.155 kg | — | — |
| eClass code | 23-05-08-01 | — | — |
| UNSPSC code | 31171504 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 14,900 N | — |
| Basic dynamic load rating, radialCr | — | 3,349.82 lbf | — |
| Basic static load rating, radialC0r | — | 7,900 N | — |
| Basic static load rating, radialC0r | — | 1,776.079 lbf | — |
| Fatigue load limit, radialCur | — | 540 N | — |
| Fatigue load limit, radialCur | — | 121.403 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 355007 | — |
| Material Number | — | — | 000000000100416954 |
| Base Type | — | 62205 | — |
| World Assembly Part Number | — | — | 62205-2RS |
| Gpsd Group | — | S02 | — |
| Upc | — | — | 0087796294493 |
| Product Line Id | — | 14 | — |
| Official Source System | — | — | CORE BP - DS DF |
| Official Last Run | — | — | 2026-08-23T20:02:47.493 |
| SAP material number | — | 0596569480000 | — |
| Base product | — | 2305080101 | — |
| Bearing X designation | — | 62205-A-2RSR | — |
| Mounting Manager ID | — | 62205-A-2RSR | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 30.6 mm | — |
| Minimum diameter shaft shoulderda min | — | 1.205 in | — |
| Maximum diameter of housing shoulderDa max | — | 46.4 mm | — |
| Maximum diameter of housing shoulderDa max | — | 1.827 in | — |
| Maximum fillet radiusra max | — | 1 mm | — |
| Maximum fillet radiusra max | — | 0.039 in | — |
| Product characteristics | |||
| Changed internal designA | — | Design variant A | — |
| Type of Seal2RSR | — | Contact seal on both sides | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationSN | — | Rings dimensional stabilized up to 120° | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — |
| Bore typeZ | — | Cylindrical | — |
| Product identity | |||
| Official product category | Deep groove ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — |
| Structure group ID | BB1_001_101 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Type Description | — | — | Radial Deep-Groove Ball |
| Construction | — | Deep groove ball bearing 622..-A-2RSR, single row, steel sheet metal cage | Single Row Deep Groove Ball Bearing | Imperial Series | 0.9843 in Bore | 2.0472 in OD | 0.7087 in Width | Double Sealed | Cylindrical Bore | Steel Cage | C0 Clearance | ISO P0 Tolerance |
| Short Description | — | Deep groove ball bearing | — |
| Number Of Rows | 1 | — | 1 |
| Tapered Bore | — | — | N |
| Properties | |||
| Filling slots | Without | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Bore type | Cylindrical | — | — |
| Matched arrangement | No | — | — |
| Radial internal clearance | CN | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Sealing type | Contact | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 0.57 kg CO 2 e | — | — |
| Technical Data | |||
| Overall Width | — | — | 0.000 mm |
| Bore Diameter (D) | — | 25 mm | — |
| Radial Rating | — | — | 0 N |
| Outside Diameter (D) | — | 52 mm | — |
| Axial Rating | — | — | 0 N |
| Width (B) | — | 18 mm | — |
| Dynamic Rating C1 | — | — | 14,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | — | 14,900 N | — |
| Dynamic Rating C90 | — | — | 0 N |
| Basic Static Load Rating, Radial (C0R) | — | 7,900 N | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N |
| Operating Temperature Min. (Tmin) | — | -20 °C | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N |
| Limiting Speed (Ng) | — | 7,900 1/min | — |
| Static Radial Rating C0 | — | — | 7,880 N |
| Operating Temperature Max. (Tmax) | — | 100 °C | — |
| Extended Dynamic Rating Ce | — | — | 0 N |
| Calculation Factor (F0) | — | 13.9 | — |
| Static Axial Rating C0A | — | — | 0 N |
| Fatigue Load Limit, Radial (Cur) | — | 540 N | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 30.6 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 33.95 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 46.4 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 1 mm | — |
| Caliber Diameter Inner Ring (D1) | — | 31.8 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 1 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 44.05 mm | — |
| Caliber Diameter Outer Ring (D1) | — | 46.3 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -20 °C | — |
| Operating temperature min.Tmin | — | -4 °F | — |
| Operating temperature max.Tmax | — | 100 °C | — |
| Operating temperature max.Tmax | — | 212 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.