Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 6206 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
7 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF620630 × 62 × 16 mm | FAG6206-C>V30 × 62 × 16 mm | TIMKEN620630 × 62 × 16 mm | NSK620630 × 62 × 16 mm | KOYO620630 × 62 × 16 mm | NACHI620630 × 62 × 16 mm | NTN6206LU30 × 62 × 16 mm |
|---|---|---|---|---|---|---|---|
| Comparable specifications | |||||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO | NACHI | NTN |
| Designation | 6206 | 6206-C>V | 6206 | 6206 | 6206 | 6206 | 6206LU |
| Product family | Deep groove ball bearings | — | Radial Deep-Groove Ball | Single row deep groove ball bearings | Single-row / Open type | Deep groove ball bearing | Single row deep groove ball bearings |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 6206 | 6200 | — | — | — | — |
| Bore diameterd | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm |
| Outside diameterD | 62 mm | 62 mm | 62 mm | 62 mm | 62 mm | 62 mm | 62 mm |
| WidthB | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Basic dynamic load ratingC | 20.3 kN | 22 kN | 19.5 kN | 21.4 kN | 24.3 kN | 24.5 kN | 21.6 kN |
| Basic static load ratingC0 | 11.2 kN | 11.3 kN | 11.3 kN | 11.3 kN | 11.3 kN | 11.3 kN | 11.3 kN |
| Fatigue load limitPu | 0.475 kN | 0.77 kN | — | — | 0.8 kN | — | 0.795 kN |
| Reference speednref | 24000 r/min | 13400 r/min | — | — | — | — | — |
| Limiting speednG | 15000 r/min | 17800 r/min | — | — | 11000 r/min | — | — |
| Mass≈m | 0.193 kg | 0.18 kg | 0.2 kg | 0.199 kg | 0.199 kg | 0.199 kg | 0.199 kg |
| Precision class | P6 and tighter width tolerance | P6 — Class 6 (ISO 492:2023) | — | — | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — | — | CN |
| Sealing | Without | Without — Not sealed | Open | Open | Open | Open | contact seal on one side |
| Cage | Sheet metal | JN — Steel sheet metal | Steel cage | — | — | — | pressed steel cage |
| Bearing material | Bearing steel | — | — | — | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — | — | -25 °C |
| Maximum operating temperatureTmax | — | 120 °C | — | — | — | — | 110 °C |
| Boundary dimensions | |||||||
| Bearing widthB | — | — | — | 16 mm | — | 16 mm | — |
| Minimum bearing chamferr min. | — | — | — | 1 mm | — | 1 mm | — |
| Calculation Factors | |||||||
| K Factor | — | — | 0.00 | — | — | — | — |
| Y1 Factor | — | — | 0.00 | — | — | — | — |
| Y2 Factor | — | — | 0.00 | — | — | — | — |
| Y0 Factor | — | — | 0.50 | — | — | — | — |
| E Factor | — | — | 0.00 | — | — | — | — |
| Cg Factor | — | — | 0.0321 | — | — | — | — |
| Calculation factors | |||||||
| Calculation factorf0 | — | 13.8 | — | — | — | — | — |
| Capabilities & suitability | |||||||
| Radial load capacity | — | Yes | — | — | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — | — | — |
| Unsealed design | — | Yes | — | — | — | — | — |
| Classification | |||||||
| Official Category Path | — | — | — | — | Deep groove ball bearings - Single-row - Open type | — | — |
| Official Classification 1 | — | — | — | — | Deep groove ball bearings / Single-row / Open type | — | — |
| Construction | |||||||
| Closure arrangement | — | — | — | — | — | Open | — |
| Listed closure suffix | — | — | — | — | — | None (open type) | — |
| Catalogue closure construction | — | — | — | Open | — | — | — |
| Dimensions | |||||||
| Minimum chamfer dimensionrmin | — | 1 mm | — | — | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.039 in | — | — | — | — | — |
| Shoulder diameter outer ringD1 | — | 52.67 mm | — | — | — | — | — |
| Shoulder diameter outer ringD1 | — | 2.074 in | — | — | — | — | — |
| Caliber diameter outer ringD2 | — | 54.91 mm | — | — | — | — | — |
| Caliber diameter outer ringD2 | — | 2.162 in | — | — | — | — | — |
| Shoulder diameter inner ringd1 | — | 39.33 mm | — | — | — | — | — |
| Shoulder diameter inner ringd1 | — | 1.548 in | — | — | — | — | — |
| Caliber diameter inner ringd2 | — | 37.72 mm | — | — | — | — | — |
| Caliber diameter inner ringd2 | — | 1.485 in | — | — | — | — | — |
| Dimensions and properties | |||||||
| Internal diameterd | — | — | — | — | — | — | 30 mm |
| External diameterD | — | — | — | — | — | — | 62 mm |
| Bearing/Inner ring widthB | — | — | — | — | — | — | 16 mm |
| Min fillet radiusrs | — | — | — | — | — | — | 1 mm |
| Radial clearance class | — | — | — | — | — | — | CN |
| Engineering — Abutment dimensions | |||||||
| Diameter of shaft abutmentd a | min. 35.6 mm | — | — | — | — | — | — |
| Diameter of housing abutmentD a | max. 56.4 mm | — | — | — | — | — | — |
| Radius of shaft or housing filletr a | max. 1 mm | — | — | — | — | — | — |
| Engineering — Calculation data | |||||||
| SKF performance class | SKF Explorer | — | — | — | — | — | — |
| Minimum load factork r | 0.03 | — | — | — | — | — | — |
| Calculation factorf 0 | 13.8 | — | — | — | — | — | — |
| Engineering — Dimensions | |||||||
| Deviation limits of mid-range bore diametert Δdmp | -0.008 to 0 mm | — | — | — | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.011 to 0 mm | — | — | — | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.06 to 0 mm | — | — | — | — | — | — |
| Shoulder diameterd 1 | ≈ 40.36 mm | — | — | — | — | — | — |
| Recess diameterD 2 | ≈ 54.06 mm | — | — | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 1 mm | — | — | — | — | — | — |
| ISO tolerance class for dimensions | P6 and tighter width tolerance | — | — | — | — | — | — |
| Engineering — Tolerances of run-out | |||||||
| Range of section height at inner ring of assembled bearingt Kia | 8 µm | — | — | — | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 13 µm | — | — | — | — | — | — |
| ISO tolerance class for geometrical tolerances | P6 | — | — | — | — | — | — |
| Equivalent-load factors | |||||||
| Catalogue load calculation factorf0 | — | — | — | — | — | 13.9 | — |
| Load ratings | |||||||
| Basic dynamic radial load ratingCr | — | — | — | 21400 N | — | 24500 N | — |
| Basic static radial load ratingC0r | — | — | — | 11300 N | — | 11300 N | — |
| Equivalent-load calculation factorf0 | — | — | — | 13.8 | — | — | — |
| Logistics | |||||||
| Product net weight | 0.193 kg | — | — | — | — | — | — |
| eClass code | 23-05-08-01 | — | — | — | — | — | — |
| UNSPSC code | 31171504 | — | — | — | — | — | — |
| Lubrication-qualified speed | |||||||
| Limiting speed with grease | — | — | — | 12000 r/min | — | — | — |
| Limiting speed with oil (open bearing) | — | — | — | 15000 r/min | — | — | — |
| Limiting speed with grease (open) | — | — | — | — | — | 11000 r/min | — |
| Limiting speed with oil (open) | — | — | — | — | — | 13000 r/min | — |
| Main Dimensions & Performance Data | |||||||
| Basic dynamic load rating, radialCr | — | 22,000 N | — | — | — | — | — |
| Basic dynamic load rating, radialCr | — | 4,946.043 lbf | — | — | — | — | — |
| Basic static load rating, radialC0r | — | 11,300 N | — | — | — | — | — |
| Basic static load rating, radialC0r | — | 2,540.468 lbf | — | — | — | — | — |
| Fatigue load limit, radialCur | — | 770 N | — | — | — | — | — |
| Fatigue load limit, radialCur | — | 173.112 lbf | — | — | — | — | — |
| Manufacturer Identity | |||||||
| Schaeffler Product Code | — | 1769390 | — | — | — | — | — |
| Material Number | — | — | 000000000100417056 | — | — | — | — |
| Official Class Key | — | — | — | — | 010-010-010 | — | — |
| Base Type | — | 6206 | — | — | — | — | — |
| World Assembly Part Number | — | — | 6206 | — | — | — | — |
| Gpsd Group | — | S01 | — | — | — | — | — |
| Upc | — | — | 0087796295193 | — | — | — | — |
| Product Line Id | — | 14 | — | — | — | — | — |
| X Life Marking | — | C | — | — | — | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:46.74 | — | — | — | — |
| SAP material number | — | 0955622810000 | — | — | — | — | — |
| Base product | — | 2305080101 | — | — | — | — | — |
| Bearing X designation | — | 6206-C | — | — | — | — | — |
| Mounting Manager ID | — | 6206-C | — | — | — | — | — |
| Grease application ID | — | 6206-C | — | — | — | — | — |
| Mounting dimensions | |||||||
| Minimum shaft shoulder diameterda min. | — | — | — | 35 mm | — | 36 mm | — |
| Maximum shaft shoulder diameterda max. | — | — | — | 38.5 mm | — | — | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 57 mm | — | 56 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | — | — | — | 1 mm | — |
| Maximum shaft or housing fillet radiusra max. | — | — | — | 1 mm | — | — | — |
| Min shoulder diameter IRda min | — | — | — | — | — | — | 35 mm |
| Max shoulder diameter IRda max | — | — | — | — | — | — | 39 mm |
| Max shoulder diameter ORDa max | — | — | — | — | — | — | 57 mm |
| Max shaft & housing fillet radiusra max | — | — | — | — | — | — | 1 mm |
| Minimum diameter shaft shoulderda min | — | 35.6 mm | — | — | — | — | — |
| Minimum diameter shaft shoulderda min | — | 1.402 in | — | — | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 56.4 mm | — | — | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 2.22 in | — | — | — | — | — |
| Maximum fillet radiusra max | — | 1 mm | — | — | — | — | — |
| Maximum fillet radiusra max | — | 0.039 in | — | — | — | — | — |
| Performance | |||||||
| Dynamic loadC | — | — | — | — | — | — | 21.6 kN |
| Static loadC0 | — | — | — | — | — | — | 11.3 kN |
| Fatigue limit loadCu | — | — | — | — | — | — | 0.795 kN |
| Coefficientf0 | — | — | — | — | — | — | 13.8 |
| Grease lubrication limit speedN lim | — | — | — | — | — | — | 7300 r/min |
| Min operating temperatureTmin | — | — | — | — | — | — | -25 °C |
| Max operating temperatureTmax | — | — | — | — | — | — | 110 °C |
| Product characteristics | |||||||
| Catalogue construction | — | — | — | — | — | — | Deep groove ball bearing, radial contact, pressed steel cage, contact seal on one side |
| Cage construction | — | — | — | — | — | — | pressed steel cage |
| Closure construction | — | — | — | — | — | — | contact seal on one side |
| Version code>V | — | Not marked on bearing | — | — | — | — | — |
| Changed internal designC | — | GenerationC | — | — | — | — | — |
| Type of SealWithout | — | Not sealed | — | — | — | — | — |
| Tolerance classP6 | — | Class 6 (ISO 492:2023) | — | — | — | — | — |
| Dimensional / heat stabilizationSN | — | Rings dimensional stabilized up to 120° | — | — | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — | — | — |
| Bore typeZ | — | Cylindrical | — | — | — | — | — |
| Product identity | |||||||
| Official product category | Deep groove ball bearings | — | — | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — | — | — | — | — |
| Structure group ID | BB1_001_101 | — | — | — | — | — | — |
| Available from SKF | Yes | — | — | — | — | — | — |
| Remanufacturable | No | — | — | — | — | — | — |
| Product Identity | |||||||
| Type Description | — | — | Radial Deep-Groove Ball | — | — | — | — |
| Construction | — | Deep groove ball bearing 62..-C, single row, Generation C, steel sheet metal cage | Single Row Deep Groove Ball Bearing | Imperial Series | 1.1811 in Bore | 2.4409 in OD | 0.6299 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | ISO P0 Tolerance | — | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — | — | — |
| Short Description | — | Deep groove ball bearing | — | — | — | — | — |
| Tapered Bore | — | — | N | — | — | — | — |
| Properties | |||||||
| Filling slots | Without | — | — | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — | — | — |
| Matched arrangement | No | — | — | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — | — | — |
| Material, bearing | Bearing steel | — | — | — | — | — | — |
| Coating | Without | — | — | — | — | — | — |
| Relubrication feature | Without | — | — | — | — | — | — |
| Indicative carbon footprint for new product | 0.71 kg CO 2 e | — | — | — | — | — | — |
| Reference mass | |||||||
| Catalogue row mass (variants not individually specified) | — | — | — | — | — | 0.199 kg | — |
| Approximate catalogue mass (open reference) | — | — | — | 0.199 kg | — | — | — |
| Technical Data | |||||||
| d | — | — | — | — | 62 mm | — | — |
| Overall Width | — | — | 0.000 mm | — | — | — | — |
| B | — | — | — | — | 16 mm | — | — |
| Radial Rating | — | — | 0 N | — | — | — | — |
| R(Min.) | — | — | — | — | 1 mm | — | — |
| Bore Diameter (D) | — | 30 mm | — | — | — | — | — |
| Axial Rating | — | — | 0 N | — | — | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 24.3 kN | — | — |
| Outside Diameter (D) | — | 62 mm | — | — | — | — | — |
| Dynamic Rating C1 | — | — | 19,500 N | — | — | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 11.3 kN | — | — |
| Width (B) | — | 16 mm | — | — | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 0.800 kN | — | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 22,000 N | — | — | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — | — | — |
| Factor : F0 | — | — | — | — | 13.9 | — | — |
| Basic Static Load Rating, Radial (C0R) | — | 11,300 N | — | — | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 11000 min-1 | — | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — | — | — |
| Static Radial Rating C0 | — | — | 11,300 N | — | — | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 13000 min-1 | — | — |
| Limiting Speed (Ng) | — | 17,800 1/min | — | — | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — | — | — |
| Da(Min.) | — | — | — | — | 35 mm | — | — |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — | — | — |
| Da(Max.) | — | — | — | — | 57 mm | — | — |
| Reference Speed (Nϑr) | — | 13,400 1/min | — | — | — | — | — |
| Ra(Max.) | — | — | — | — | 1 mm | — | — |
| Calculation Factor (F0) | — | 13.8 | — | — | — | — | — |
| Mass(Refer.) | — | — | — | — | 0.199 kg | — | — |
| Fatigue Load Limit, Radial (Cur) | — | 770 N | — | — | — | — | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 35.6 mm | — | — | — | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 39.33 mm | — | — | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 56.4 mm | — | — | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 1 mm | — | — | — | — | — |
| Caliber Diameter Inner Ring (D1) | — | 37.72 mm | — | — | — | — | — |
| Maximum Fillet Radius (Ra Max) | — | 1 mm | — | — | — | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 52.67 mm | — | — | — | — | — |
| Caliber Diameter Outer Ring (D1) | — | 54.91 mm | — | — | — | — | — |
| Temperature range | |||||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — | — | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — | — | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.