Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 61912 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF6191260 × 85 × 13 mm | FAG6191260 × 85 × 13 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 61912 | 61912 |
| Product family | Deep groove ball bearings | — |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings |
| Bore diameterd | 60 mm | 60 mm |
| Outside diameterD | 85 mm | 85 mm |
| WidthB | 13 mm | 13 mm |
| Basic dynamic load ratingC | 16.5 kN | 17.4 kN |
| Basic static load ratingC0 | 12 kN | 14.3 kN |
| Fatigue load limitPu | 0.6 kN | 0.79 kN |
| Reference speednref | 16000 r/min | 6900 r/min |
| Limiting speednG | 10000 r/min | 11300 r/min |
| Mass≈m | 0.194 kg | 0.206 kg |
| Precision class | P6 | PN — Normal (ISO 492:2023) |
| Internal clearance | CN | CN (Group N) — Normal internal clearance |
| Sealing | Without | Without — Not sealed |
| Cage | Sheet metal | JN — Steel sheet metal |
| Bearing material | Bearing steel | — |
| Lubricant | None | Without — Bearing not greased |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 120 °C |
| Calculation factors | ||
| Calculation factorf0 | — | 16.5 |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Axial load capacity in both directions | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Dimensions | ||
| Minimum chamfer dimensionrmin | — | 1 mm |
| Minimum chamfer dimensionrmin | — | 0.039 in |
| Shoulder diameter outer ringD1 | — | 76.8 mm |
| Shoulder diameter outer ringD1 | — | 3.024 in |
| Caliber diameter outer ringD2 | — | 79.2 mm |
| Caliber diameter outer ringD2 | — | 3.118 in |
| Shoulder diameter inner ringd1 | — | 68.2 mm |
| Shoulder diameter inner ringd1 | — | 2.685 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 64.6 mm | — |
| Diameter of housing abutmentD a | max. 80.4 mm | — |
| Radius of shaft or housing filletr a | max. 1 mm | — |
| Engineering — Calculation data | ||
| Minimum load factork r | 0.02 | — |
| Calculation factorf 0 | 13.9 | — |
| Engineering — Dimensions | ||
| Deviation limits of mid-range bore diametert Δdmp | -0.012 to 0 mm | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.013 to 0 mm | — |
| Deviation limits of ring widtht ΔBs | -0.15 to 0 mm | — |
| Shoulder diameterd 1 | ≈ 68.3 mm | — |
| Recess diameterD 2 | ≈ 78.7 mm | — |
| Chamfer dimensionr 1,2 | min. 1 mm | — |
| ISO tolerance class for dimensions | P6 | — |
| Engineering — Tolerances of run-out | ||
| Range of section height at inner ring of assembled bearingt Kia | 10 µm | — |
| Range of section height at outer ring of assembled bearingt Kea | 18 µm | — |
| ISO tolerance class for geometrical tolerances | P6 | — |
| Logistics | ||
| Product net weight | 0.194 kg | — |
| eClass code | 23-05-08-01 | — |
| UNSPSC code | 31171504 | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | — | 17,400 N |
| Basic dynamic load rating, radialCr | — | 3,911.871 lbf |
| Basic static load rating, radialC0r | — | 14,300 N |
| Basic static load rating, radialC0r | — | 3,214.928 lbf |
| Fatigue load limit, radialCur | — | 790 N |
| Fatigue load limit, radialCur | — | 177.608 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 350584 |
| Base Type | — | 61912 |
| Gpsd Group | — | S02 |
| Product Line Id | — | 14 |
| X Life Marking | — | n.r. |
| SAP material number | — | 0097866510000 |
| Base product | — | 2305080101 |
| Bearing X designation | — | 61912 |
| Mounting Manager ID | — | 61912 |
| Grease application ID | — | 61912 |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 64.6 mm |
| Minimum diameter shaft shoulderda min | — | 2.543 in |
| Maximum diameter of housing shoulderDa max | — | 80.4 mm |
| Maximum diameter of housing shoulderDa max | — | 3.165 in |
| Maximum fillet radiusra max | — | 1 mm |
| Maximum fillet radiusra max | — | 0.039 in |
| Product characteristics | ||
| Type of SealWithout | — | Not sealed |
| Tolerance classPN | — | Normal (ISO 492:2023) |
| Dimensional / heat stabilizationSN | — | Rings dimensional stabilized up to 120° |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance |
| Bore typeZ | — | Cylindrical |
| Product identity | ||
| Official product category | Deep groove ball bearings | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — |
| Structure group ID | BB1_001_101 | — |
| Available from SKF | Yes | — |
| Remanufacturable | No | — |
| Product Identity | ||
| Construction | — | Deep groove ball bearing 619, single row, steel sheet metal cage |
| Short Description | — | Deep groove ball bearing |
| Properties | ||
| Filling slots | Without | — |
| Number of rows | 1 | — |
| Locating feature, bearing outer ring | Without | — |
| Bore type | Cylindrical | — |
| Matched arrangement | No | — |
| Radial internal clearance | CN | — |
| Material, bearing | Bearing steel | — |
| Coating | Without | — |
| Relubrication feature | Without | — |
| Indicative carbon footprint for new product | 0.72 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 60 mm |
| Outside Diameter (D) | — | 85 mm |
| Width (B) | — | 13 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 17,400 N |
| Basic Static Load Rating, Radial (C0R) | — | 14,300 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 11,300 1/min |
| Operating Temperature Max. (Tmax) | — | 120 °C |
| Reference Speed (Nϑr) | — | 6,900 1/min |
| Calculation Factor (F0) | — | 16.5 |
| Fatigue Load Limit, Radial (Cur) | — | 790 N |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 64.6 mm |
| Shoulder Diameter Inner Ring (D1) | — | 68.2 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 80.4 mm |
| Minimum Chamfer Dimension (Rmin) | — | 1 mm |
| Maximum Fillet Radius (Ra Max) | — | 1 mm |
| Shoulder Diameter Outer Ring (D1) | — | 76.8 mm |
| Caliber Diameter Outer Ring (D1) | — | 79.2 mm |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 120 °C |
| Operating temperature max.Tmax | — | 248 °F |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.