Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 606 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
4 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG606-2Z-HLN6 × 17 × 6 mm | NSK6066 × 17 × 6 mm | KOYO6066 × 17 × 6 mm | EZO6066 × 17 × 6 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | FAG | NSK | KOYO | EZO |
| Designation | 606-2Z-HLN | 606 | 606 | 606 |
| Product family | — | Single row deep groove ball bearings | Extra-small, miniature ball bearings / Standard type / Open | Miniature Ball Bearing |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | 606 | — | — | — |
| Bore diameterd | 6 mm | 6 mm | 6 mm | 6 mm |
| Outside diameterD | 17 mm | 17 mm | 17 mm | 17 mm |
| WidthB | 6 mm | 6 mm | 6 mm | 6 mm |
| Basic dynamic load ratingC | 2.09 kN | 2.49 kN | 2.45 kN | 2.26 kN |
| Basic static load ratingC0 | 0.74 kN | 0.835 kN | 0.74 kN | 0.838 kN |
| Fatigue load limitPu | 0.0455 kN | — | 0.03 kN | — |
| Reference speednref | 40000 r/min | — | — | — |
| Limiting speednG | 49000 r/min | — | 43000 r/min | — |
| Mass≈m | 0.006 kg | 0.00597 kg | 0.005 kg | 0.00543 kg |
| Precision class | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | 2Z — Non-contact shield on both sides | Open | Open | Open (no closure suffix in this catalogue marking) |
| Cage | JN — Steel sheet metal | — | — | — |
| Bearing material | — | — | — | High-carbon chromium bearing steel |
| Lubricant | Lubricating grease | — | — | — |
| Minimum operating temperatureTmin | -30 °C | — | — | — |
| Maximum operating temperatureTmax | 120 °C | — | — | — |
| Boundary dimensions | ||||
| Bearing width (open)B | — | 6 mm | — | — |
| Outer diameterD | — | — | — | 17 mm |
| Minimum bearing chamferr min. | — | 0.3 mm | — | — |
| Outer diameterD | — | — | — | 0.6693 inch |
| Inner ring widthB | — | — | — | 6 mm |
| Inner ring widthB | — | — | — | 0.2362 inch |
| Outer ring widthC | — | — | — | 6 mm |
| Outer ring widthC | — | — | — | 0.2362 inch |
| Inner ring chamfer dimensionr si min | — | — | — | 0.3 mm |
| Inner ring chamfer dimensionr si min | — | — | — | 0.0118 inch |
| Outer ring chamfer dimensionr se min | — | — | — | 0.3 mm |
| Outer ring chamfer dimensionr se min | — | — | — | 0.0118 inch |
| Calculation factors | ||||
| Calculation factorf0 | 12.2 | — | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | Yes | — | — | — |
| Axial load capacity in one direction | Yes | — | — | — |
| Axial load capacity in both directions | Yes | — | — | — |
| Lifetimelubricationfreedomfrommaintenance | Yes | — | — | — |
| Suitable for grease lubrication | Yes | — | — | — |
| Sealedonbothsides | Yes | — | — | — |
| Classification | ||||
| Official Category Path | — | — | Deep groove ball bearings - Extra-small, miniature ball bearings - Standard type - Open | — |
| Official Classification 1 | — | — | Deep groove ball bearings / Extra-small, miniature ball bearings / Standard type / Open | — |
| Construction | ||||
| Catalogue closure construction | — | Open | — | — |
| Closure interpretation | — | — | — | Open (no closure suffix in this catalogue marking) |
| Material interpretation | — | — | — | High-carbon chromium bearing steel |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | 0.3 mm | — | — | — |
| Minimum chamfer dimensionrmin | 0.012 in | — | — | — |
| Shoulder diameter outer ringD1 | 13.8 mm | — | — | — |
| Shoulder diameter outer ringD1 | 0.543 in | — | — | — |
| Caliber diameter outer ringD2 | 14.7 mm | — | — | — |
| Caliber diameter outer ringD2 | 0.579 in | — | — | — |
| Shoulder diameter inner ringd1 | 9 mm | — | — | — |
| Shoulder diameter inner ringd1 | 0.354 in | — | — | — |
| Load ratings | ||||
| Basic dynamic radial load ratingCr | — | 2490 N | — | — |
| Basic static radial load ratingC0r | — | 835 N | — | — |
| Lubrication-qualified speed | ||||
| Limiting speed with grease | — | 38000 r/min | — | — |
| Limiting speed with oil (open) | — | 45000 r/min | — | — |
| Catalogue limiting speed (grease) | — | — | — | 42000 r/min |
| Catalogue limiting speed (oil) | — | — | — | 49000 r/min |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | 2,090 N | — | — | — |
| Basic dynamic load rating, radialCr | 469.874 lbf | — | — | — |
| Basic static load rating, radialC0r | 740 N | — | — | — |
| Basic static load rating, radialC0r | 166.367 lbf | — | — | — |
| Fatigue load limit, radialCur | 45.5 N | — | — | — |
| Fatigue load limit, radialCur | 10.229 lbf | — | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | 1851398 | — | — | — |
| Official Class Key | — | — | 010-020-010 | — |
| Base Type | 606 | — | — | — |
| Gpsd Group | S02 | — | — | — |
| Product Line Id | 14 | — | — | — |
| SAP material number | 0716704910000 | — | — | — |
| Base product | 2305080101 | — | — | — |
| Mounting dimensions | ||||
| Minimum shaft shoulder diameter (open)da min. | — | 8 mm | — | — |
| Maximum adjacent fillet radiusra max. | — | 0.3 mm | — | — |
| Maximum housing shoulder diameter (open)Da max. | — | 15 mm | — | — |
| Adjacent mounting dimension (da min)da min | — | — | — | 14.9 mm |
| Adjacent mounting dimension (da min)da min | — | — | — | 0.5866 inch |
| Adjacent mounting dimension (da max)da max | — | — | — | 15.4 mm |
| Adjacent mounting dimension (da max)da max | — | — | — | 0.6063 inch |
| Adjacent mounting dimension (r asi max)r asi max | — | — | — | 0.3 mm |
| Adjacent mounting dimension (r asi max)r asi max | — | — | — | 0.0118 inch |
| Adjacent mounting dimension (r ase max)r ase max | — | — | — | 0.3 mm |
| Adjacent mounting dimension (r ase max)r ase max | — | — | — | 0.0118 inch |
| Minimum diameter shaft shoulderda min | 8 mm | — | — | — |
| Minimum diameter shaft shoulderda min | 0.315 in | — | — | — |
| Maximum diameter of housing shoulderDa max | 15 mm | — | — | — |
| Maximum diameter of housing shoulderDa max | 0.591 in | — | — | — |
| Maximum fillet radiusra max | 0.3 mm | — | — | — |
| Maximum fillet radiusra max | 0.012 in | — | — | — |
| Product characteristics | ||||
| Type of Seal2Z | Non-contact shield on both sides | — | — | — |
| Tolerance classPN | Normal (ISO 492:2023) | — | — | — |
| Dimensional / heat stabilizationSN | Rings dimensional stabilized up to 120° | — | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — | — |
| Bore typeZ | Cylindrical | — | — | — |
| Product Identity | ||||
| Construction | Deep groove ball bearing 60..-2Z, single row, shields, steel sheet metal cage | — | — | — |
| Short Description | Deep groove ball bearing | — | — | — |
| Reference mass | ||||
| Approximate catalogue mass (open) | — | 5.97 g | — | — |
| Reference mass | — | — | — | 5.43 g |
| Rolling elements | ||||
| Ball diameterDw | — | — | — | 3.5 mm |
| Ball quantityZ | — | — | — | 6 |
| Technical Data | ||||
| d | — | — | 17 mm | — |
| B | — | — | 6 mm | — |
| Bore Diameter (D) | 6 mm | — | — | — |
| R(Min.) | — | — | 0.3 mm | — |
| Outside Diameter (D) | 17 mm | — | — | — |
| Basic Load Ratings : Cr | — | — | 2.45 kN | — |
| Width (B) | 6 mm | — | — | — |
| Basic Load Ratings : C0R | — | — | 0.74 kN | — |
| Basic Dynamic Load Rating, Radial (Cr) | 2,090 N | — | — | — |
| Fatigue Load Limit : Cu | — | — | 0.030 kN | — |
| Basic Static Load Rating, Radial (C0R) | 740 N | — | — | — |
| Factor : F0 | — | — | 12.2 | — |
| Operating Temperature Min. (Tmin) | -30 °C | — | — | — |
| Limiting Speeds(Grease Lub.) | — | — | 43000 min-1 | — |
| Limiting Speed (Ng) | 49,000 1/min | — | — | — |
| Limiting Speeds(Oil Lub.) | — | — | 51000 min-1 | — |
| Operating Temperature Max. (Tmax) | 120 °C | — | — | — |
| Da(Min.) | — | — | 8 mm | — |
| Reference Speed (Nϑr) | 40,000 1/min | — | — | — |
| Da(Max.) | — | — | 15 mm | — |
| Calculation Factor (F0) | 12.2 | — | — | — |
| Ra(Max.) | — | — | 0.3 mm | — |
| Fatigue Load Limit, Radial (Cur) | 45.5 N | — | — | — |
| Mass(Refer.) | — | — | 5.8 g | — |
| Minimum Diameter Shaft Shoulder (Da Min) | 8 mm | — | — | — |
| Shoulder Diameter Inner Ring (D1) | 9 mm | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 15 mm | — | — | — |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | — | — | — |
| Maximum Fillet Radius (Ra Max) | 0.3 mm | — | — | — |
| Shoulder Diameter Outer Ring (D1) | 13.8 mm | — | — | — |
| Caliber Diameter Outer Ring (D1) | 14.7 mm | — | — | — |
| Temperature range | ||||
| Operating temperature min.Tmin | -30 °C | — | — | — |
| Operating temperature min.Tmin | -22 °F | — | — | — |
| Operating temperature max.Tmax | 120 °C | — | — | — |
| Operating temperature max.Tmax | 248 °F | — | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.