Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 603 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | NSK6033 × 9 × 3 mm | KOYO6033 × 9 × 3 mm | EZO6033 × 9 × 3 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | NSK | KOYO | EZO |
| Designation | 603 | 603 | 603 |
| Product family | Single row deep groove ball bearings | Extra-small, miniature ball bearings / Standard type / Open | Miniature Ball Bearing |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Bore diameterd | 3 mm | 3 mm | 3 mm |
| Outside diameterD | 9 mm | 9 mm | 9 mm |
| WidthB | 3 mm | 3 mm | 3 mm |
| Basic dynamic load ratingC | 0.63 kN | 0.54 kN | 0.572 kN |
| Basic static load ratingC0 | 0.187 kN | 0.16 kN | 0.188 kN |
| Fatigue load limitPu | — | 0.004 kN | — |
| Limiting speednG | — | 60000 r/min | — |
| Mass≈m | 0.00087 kg | 0 kg | 0.00085 kg |
| Sealing | Open | Open | Open (no closure suffix in this catalogue marking) |
| Bearing material | — | — | High-carbon chromium bearing steel |
| Boundary dimensions | |||
| Bearing width (open)B | 3 mm | — | — |
| Outer diameterD | — | — | 9 mm |
| Minimum bearing chamferr min. | 0.15 mm | — | — |
| Outer diameterD | — | — | 0.3543 inch |
| Inner ring widthB | — | — | 3 mm |
| Inner ring widthB | — | — | 0.1181 inch |
| Outer ring widthC | — | — | 3 mm |
| Outer ring widthC | — | — | 0.1181 inch |
| Inner ring chamfer dimensionr si min | — | — | 0.15 mm |
| Inner ring chamfer dimensionr si min | — | — | 0.0059 inch |
| Outer ring chamfer dimensionr se min | — | — | 0.15 mm |
| Outer ring chamfer dimensionr se min | — | — | 0.0059 inch |
| Classification | |||
| Official Category Path | — | Deep groove ball bearings - Extra-small, miniature ball bearings - Standard type - Open | — |
| Official Classification 1 | — | Deep groove ball bearings / Extra-small, miniature ball bearings / Standard type / Open | — |
| Construction | |||
| Catalogue closure construction | Open | — | — |
| Closure interpretation | — | — | Open (no closure suffix in this catalogue marking) |
| Material interpretation | — | — | High-carbon chromium bearing steel |
| Load ratings | |||
| Basic dynamic radial load ratingCr | 630 N | — | — |
| Basic static radial load ratingC0r | 187 N | — | — |
| Lubrication-qualified speed | |||
| Limiting speed with grease | 56000 r/min | — | — |
| Limiting speed with oil (open) | 67000 r/min | — | — |
| Catalogue limiting speed (grease) | — | — | 66000 r/min |
| Catalogue limiting speed (oil) | — | — | 78000 r/min |
| Manufacturer Identity | |||
| Official Class Key | — | 010-020-010 | — |
| Mounting dimensions | |||
| Minimum shaft shoulder diameter (open)da min. | 4.2 mm | — | — |
| Maximum adjacent fillet radiusra max. | 0.15 mm | — | — |
| Maximum housing shoulder diameter (open)Da max. | 7.8 mm | — | — |
| Adjacent mounting dimension (da min)da min | — | — | 7.3 mm |
| Adjacent mounting dimension (da min)da min | — | — | 0.2874 inch |
| Adjacent mounting dimension (da max)da max | — | — | 7.8 mm |
| Adjacent mounting dimension (da max)da max | — | — | 0.3071 inch |
| Adjacent mounting dimension (r asi max)r asi max | — | — | 0.15 mm |
| Adjacent mounting dimension (r asi max)r asi max | — | — | 0.0059 inch |
| Adjacent mounting dimension (r ase max)r ase max | — | — | 0.15 mm |
| Adjacent mounting dimension (r ase max)r ase max | — | — | 0.0059 inch |
| Reference mass | |||
| Approximate catalogue mass (open) | 0.87 g | — | — |
| Reference mass | — | — | 0.85 g |
| Rolling elements | |||
| Ball diameterDw | — | — | 1.588 mm |
| Ball quantityZ | — | — | 6 |
| Technical Data | |||
| d | — | 9 mm | — |
| B | — | 3 mm | — |
| R(Min.) | — | 0.15 mm | — |
| Basic Load Ratings : Cr | — | 0.540 kN | — |
| Basic Load Ratings : C0R | — | 0.16 kN | — |
| Fatigue Load Limit : Cu | — | 0.004 kN | — |
| Factor : F0 | — | 14.0 | — |
| Limiting Speeds(Grease Lub.) | — | 60000 min-1 | — |
| Limiting Speeds(Oil Lub.) | — | 72000 min-1 | — |
| Da(Min.) | — | 4.2 mm | — |
| Da(Max.) | — | 7.8 mm | — |
| Ra(Max.) | — | 0.15 mm | — |
| Mass(Refer.) | — | 0.9 g | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.