Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 6002 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
6 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF600215 × 32 × 9 mm | FAG6002-C>V15 × 32 × 9 mm | TIMKEN600215 × 32 × 9 mm | NSK600215 × 32 × 9 mm | KOYO600215 × 32 × 9 mm | NACHI600215 × 32 × 9 mm |
|---|---|---|---|---|---|---|
| Comparable specifications | ||||||
| Brand | SKF | FAG | TIMKEN | NSK | KOYO | NACHI |
| Designation | 6002 | 6002-C>V | 6002 | 6002 | 6002 | 6002 |
| Product family | Deep groove ball bearings | — | Radial Deep-Groove Ball | Single row deep groove ball bearings | Single-row / Open type | Deep groove ball bearing |
| Detailed type | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings | Deep groove ball bearings |
| Series | — | 6002 | 6000 | — | — | — |
| Bore diameterd | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm |
| Outside diameterD | 32 mm | 32 mm | 32 mm | 32 mm | 32 mm | 32 mm |
| WidthB | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm | 9 mm |
| Basic dynamic load ratingC | 5.85 kN | 6.3 kN | 5.59 kN | 6.15 kN | 7 kN | 7.05 kN |
| Basic static load ratingC0 | 2.85 kN | 2.85 kN | 2.84 kN | 2.84 kN | 2.85 kN | 2.84 kN |
| Fatigue load limitPu | 0.12 kN | 0.191 kN | — | — | 0.15 kN | — |
| Reference speednref | 50000 r/min | 23200 r/min | — | — | — | — |
| Limiting speednG | 32000 r/min | 37000 r/min | — | — | 23000 r/min | — |
| Mass≈m | 0.03 kg | 0.027 kg | 0.03 kg | 0.031 kg | 0.03 kg | 0.032 kg |
| Precision class | P6 and tighter width tolerance | P6 — Class 6 (ISO 492:2023) | — | — | — | — |
| Internal clearance | CN | CN (Group N) — Normal internal clearance | — | — | — | — |
| Sealing | Without | Without — Not sealed | Open | Open | Open | Open |
| Cage | Sheet metal | JN — Steel sheet metal | Steel cage | — | — | — |
| Bearing material | Bearing steel | — | — | — | — | — |
| Lubricant | None | Without — Bearing not greased | — | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — | — | — |
| Maximum operating temperatureTmax | — | 120 °C | — | — | — | — |
| Boundary dimensions | ||||||
| Bearing widthB | — | — | — | 9 mm | — | 9 mm |
| Minimum bearing chamferr min. | — | — | — | 0.3 mm | — | 0.3 mm |
| Calculation Factors | ||||||
| K Factor | — | — | 0.00 | — | — | — |
| Y1 Factor | — | — | 0.00 | — | — | — |
| Y2 Factor | — | — | 0.00 | — | — | — |
| Y0 Factor | — | — | 0.50 | — | — | — |
| E Factor | — | — | 0.00 | — | — | — |
| Cg Factor | — | — | 0.0208 | — | — | — |
| Calculation factors | ||||||
| Calculation factorf0 | — | 14 | — | — | — | — |
| Capabilities & suitability | ||||||
| Radial load capacity | — | Yes | — | — | — | — |
| Axial load capacity in one direction | — | Yes | — | — | — | — |
| Axial load capacity in both directions | — | Yes | — | — | — | — |
| Suitable for grease lubrication | — | Yes | — | — | — | — |
| Suitable for oil lubrication | — | Yes | — | — | — | — |
| Unsealed design | — | Yes | — | — | — | — |
| Classification | ||||||
| Official Category Path | — | — | — | — | Deep groove ball bearings - Single-row - Open type | — |
| Official Classification 1 | — | — | — | — | Deep groove ball bearings / Single-row / Open type | — |
| Construction | ||||||
| Closure arrangement | — | — | — | — | — | Open |
| Listed closure suffix | — | — | — | — | — | None (open type) |
| Catalogue closure construction | — | — | — | Open | — | — |
| Dimensions | ||||||
| Minimum chamfer dimensionrmin | — | 0.3 mm | — | — | — | — |
| Minimum chamfer dimensionrmin | — | 0.012 in | — | — | — | — |
| Shoulder diameter outer ringD1 | — | 26.84 mm | — | — | — | — |
| Shoulder diameter outer ringD1 | — | 1.057 in | — | — | — | — |
| Caliber diameter outer ringD2 | — | 28.75 mm | — | — | — | — |
| Caliber diameter outer ringD2 | — | 1.132 in | — | — | — | — |
| Shoulder diameter inner ringd1 | — | 20.16 mm | — | — | — | — |
| Shoulder diameter inner ringd1 | — | 0.794 in | — | — | — | — |
| Caliber diameter inner ringd2 | — | 19.18 mm | — | — | — | — |
| Caliber diameter inner ringd2 | — | 0.755 in | — | — | — | — |
| Engineering — Abutment dimensions | ||||||
| Diameter of shaft abutmentd a | min. 17 mm | — | — | — | — | — |
| Diameter of housing abutmentD a | max. 30 mm | — | — | — | — | — |
| Radius of shaft or housing filletr a | max. 0.3 mm | — | — | — | — | — |
| Engineering — Calculation data | ||||||
| SKF performance class | SKF Explorer | — | — | — | — | — |
| Minimum load factork r | 0.03 | — | — | — | — | — |
| Calculation factorf 0 | 14 | — | — | — | — | — |
| Engineering — Dimensions | ||||||
| Deviation limits of mid-range bore diametert Δdmp | -0.007 to 0 mm | — | — | — | — | — |
| Deviation limits of mid-range outside diametert ΔDmp | -0.009 to 0 mm | — | — | — | — | — |
| Deviation limits of ring widtht ΔBs | -0.06 to 0 mm | — | — | — | — | — |
| Shoulder diameterd 1 | ≈ 20.5 mm | — | — | — | — | — |
| Recess diameterD 2 | ≈ 28.2 mm | — | — | — | — | — |
| Chamfer dimensionr 1,2 | min. 0.3 mm | — | — | — | — | — |
| ISO tolerance class for dimensions | P6 and tighter width tolerance | — | — | — | — | — |
| Engineering — Tolerances of run-out | ||||||
| Range of section height at inner ring of assembled bearingt Kia | 4 µm | — | — | — | — | — |
| Maximum run-out of inner ring side face to the boret Sd | 7 µm | — | — | — | — | — |
| Maximum axial run-out of inner ring of assembled bearingt Sia | 7 µm | — | — | — | — | — |
| Range of section height at outer ring of assembled bearingt Kea | 7 µm | — | — | — | — | — |
| Perpendicularity of outer ring outside surfacet SD | 4 µm | — | — | — | — | — |
| Maximum axial run-out of outer ring of assembled bearingt Sea | 8 µm | — | — | — | — | — |
| ISO tolerance class for geometrical tolerances | P5 | — | — | — | — | — |
| Equivalent-load factors | ||||||
| Catalogue load calculation factorf0 | — | — | — | — | — | 13.9 |
| Load ratings | ||||||
| Basic dynamic radial load ratingCr | — | — | — | 6150 N | — | 7050 N |
| Basic static radial load ratingC0r | — | — | — | 2840 N | — | 2840 N |
| Equivalent-load calculation factorf0 | — | — | — | 13.9 | — | — |
| Logistics | ||||||
| Product net weight | 0.03 kg | — | — | — | — | — |
| eClass code | 23-05-08-01 | — | — | — | — | — |
| UNSPSC code | 31171504 | — | — | — | — | — |
| Lubrication-qualified speed | ||||||
| Limiting speed with grease | — | — | — | 26000 r/min | — | — |
| Limiting speed with oil (open bearing) | — | — | — | 32000 r/min | — | — |
| Limiting speed with grease (open) | — | — | — | — | — | 24000 r/min |
| Limiting speed with oil (open) | — | — | — | — | — | 28000 r/min |
| Main Dimensions & Performance Data | ||||||
| Basic dynamic load rating, radialCr | — | 6,300 N | — | — | — | — |
| Basic dynamic load rating, radialCr | — | 1,416.367 lbf | — | — | — | — |
| Basic static load rating, radialC0r | — | 2,850 N | — | — | — | — |
| Basic static load rating, radialC0r | — | 640.737 lbf | — | — | — | — |
| Fatigue load limit, radialCur | — | 191 N | — | — | — | — |
| Fatigue load limit, radialCur | — | 42.941 lbf | — | — | — | — |
| Manufacturer Identity | ||||||
| Schaeffler Product Code | — | 1894811 | — | — | — | — |
| Material Number | — | — | 000000000100417052 | — | — | — |
| Official Class Key | — | — | — | — | 010-010-010 | — |
| Base Type | — | 6002 | — | — | — | — |
| World Assembly Part Number | — | — | 6002 | — | — | — |
| Gpsd Group | — | S01 | — | — | — | — |
| Upc | — | — | 0087796294745 | — | — | — |
| Product Line Id | — | 14 | — | — | — | — |
| X Life Marking | — | C | — | — | — | — |
| Official Source System | — | — | CORE BP - DS DF | — | — | — |
| Official Last Run | — | — | 2026-08-23T20:02:47.93 | — | — | — |
| SAP material number | — | 0957026440000 | — | — | — | — |
| Base product | — | 2305080101 | — | — | — | — |
| Bearing X designation | — | 6002-C | — | — | — | — |
| Mounting Manager ID | — | 6002-C | — | — | — | — |
| Grease application ID | — | 6002-C | — | — | — | — |
| Mounting dimensions | ||||||
| Minimum shaft shoulder diameterda min. | — | — | — | 17 mm | — | 17 mm |
| Maximum shaft shoulder diameterda max. | — | — | — | 19 mm | — | — |
| Maximum housing shoulder diameterDa max. | — | — | — | 30 mm | — | 30 mm |
| Maximum adjacent fillet radiusra max. | — | — | — | — | — | 0.3 mm |
| Maximum shaft or housing fillet radiusra max. | — | — | — | 0.3 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 17 mm | — | — | — | — |
| Minimum diameter shaft shoulderda min | — | 0.669 in | — | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 30 mm | — | — | — | — |
| Maximum diameter of housing shoulderDa max | — | 1.181 in | — | — | — | — |
| Maximum fillet radiusra max | — | 0.3 mm | — | — | — | — |
| Maximum fillet radiusra max | — | 0.012 in | — | — | — | — |
| Product characteristics | ||||||
| Version code>V | — | Not marked on bearing | — | — | — | — |
| Changed internal designC | — | GenerationC | — | — | — | — |
| Type of SealWithout | — | Not sealed | — | — | — | — |
| Tolerance classP6 | — | Class 6 (ISO 492:2023) | — | — | — | — |
| Dimensional / heat stabilizationSN | — | Rings dimensional stabilized up to 120° | — | — | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — | — | — |
| Bore typeZ | — | Cylindrical | — | — | — | — |
| Product identity | ||||||
| Official product category | Deep groove ball bearings | — | — | — | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/deep-groove-ball-bearings | — | — | — | — | — |
| Structure group ID | BB1_001_101 | — | — | — | — | — |
| Available from SKF | Yes | — | — | — | — | — |
| Remanufacturable | No | — | — | — | — | — |
| Product Identity | ||||||
| Type Description | — | — | Radial Deep-Groove Ball | — | — | — |
| Construction | — | Deep groove ball bearing 60..-C, single row, Generation C, steel sheet metal cage | Single Row Deep Groove Ball Bearing | Imperial Series | 0.5906 in Bore | 1.2598 in OD | 0.3543 in Width | Open | Cylindrical Bore | Steel Cage | C0 Clearance | ISO P0 Tolerance | — | — | — |
| Number Of Rows | 1 | — | 1 | — | — | — |
| Short Description | — | Deep groove ball bearing | — | — | — | — |
| Tapered Bore | — | — | N | — | — | — |
| Properties | ||||||
| Filling slots | Without | — | — | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — | — | — |
| Bore type | Cylindrical | — | — | — | — | — |
| Matched arrangement | No | — | — | — | — | — |
| Radial internal clearance | CN | — | — | — | — | — |
| Material, bearing | Bearing steel | — | — | — | — | — |
| Coating | Without | — | — | — | — | — |
| Relubrication feature | Without | — | — | — | — | — |
| Indicative carbon footprint for new product | 0.11 kg CO 2 e | — | — | — | — | — |
| Reference mass | ||||||
| Catalogue row mass (variants not individually specified) | — | — | — | — | — | 0.032 kg |
| Approximate catalogue mass (open reference) | — | — | — | 0.031 kg | — | — |
| Technical Data | ||||||
| d | — | — | — | — | 32 mm | — |
| Overall Width | — | — | 0.000 mm | — | — | — |
| B | — | — | — | — | 9 mm | — |
| Radial Rating | — | — | 0 N | — | — | — |
| R(Min.) | — | — | — | — | 0.3 mm | — |
| Bore Diameter (D) | — | 15 mm | — | — | — | — |
| Axial Rating | — | — | 0 N | — | — | — |
| Basic Load Ratings : Cr | — | — | — | — | 7.00 kN | — |
| Outside Diameter (D) | — | 32 mm | — | — | — | — |
| Dynamic Rating C1 | — | — | 5,590 N | — | — | — |
| Basic Load Ratings : C0R | — | — | — | — | 2.85 kN | — |
| Width (B) | — | 9 mm | — | — | — | — |
| Dynamic Rating C90 | — | — | 0 N | — | — | — |
| Fatigue Load Limit : Cu | — | — | — | — | 0.150 kN | — |
| Basic Dynamic Load Rating, Radial (Cr) | — | 6,300 N | — | — | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — | — | — |
| Factor : F0 | — | — | — | — | 13.9 | — |
| Basic Static Load Rating, Radial (C0R) | — | 2,850 N | — | — | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | — | 23000 min-1 | — |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — | — | — |
| Static Radial Rating C0 | — | — | 2,840 N | — | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | — | 27000 min-1 | — |
| Limiting Speed (Ng) | — | 37,000 1/min | — | — | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — | — | — |
| Da(Min.) | — | — | — | — | 17 mm | — |
| Operating Temperature Max. (Tmax) | — | 120 °C | — | — | — | — |
| Static Axial Rating C0A | — | — | 0 N | — | — | — |
| Da(Max.) | — | — | — | — | 30 mm | — |
| Reference Speed (Nϑr) | — | 23,200 1/min | — | — | — | — |
| Ra(Max.) | — | — | — | — | 0.3 mm | — |
| Calculation Factor (F0) | — | 14 | — | — | — | — |
| Mass(Refer.) | — | — | — | — | 0.030 kg | — |
| Fatigue Load Limit, Radial (Cur) | — | 191 N | — | — | — | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 17 mm | — | — | — | — |
| Shoulder Diameter Inner Ring (D1) | — | 20.16 mm | — | — | — | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 30 mm | — | — | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 0.3 mm | — | — | — | — |
| Caliber Diameter Inner Ring (D1) | — | 19.18 mm | — | — | — | — |
| Maximum Fillet Radius (Ra Max) | — | 0.3 mm | — | — | — | — |
| Shoulder Diameter Outer Ring (D1) | — | 26.84 mm | — | — | — | — |
| Caliber Diameter Outer Ring (D1) | — | 28.75 mm | — | — | — | — |
| Temperature range | ||||||
| Operating temperature min.Tmin | — | -30 °C | — | — | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — | — | — |
| Operating temperature max.Tmax | — | 120 °C | — | — | — | — |
| Operating temperature max.Tmax | — | 248 °F | — | — | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.