Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 54324 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG54324-MP100 × 210 × 131.2 mm | NSK54324X100 × 210 × 131.2 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | NSK |
| Designation | 54324-MP | 54324X |
| Product family | — | Axial deep groove ball bearing |
| Detailed type | Axial deep groove ball bearings | Axial deep groove ball bearings |
| Series | 54324 | — |
| Bore diameterd | 100 mm | 100 mm |
| Outside diameterD | 210 mm | 210 mm |
| WidthB | 131.2 mm | 131.2 mm |
| Reference speednref | 3100 r/min | — |
| Limiting speednG | 1610 r/min | — |
| Mass≈m | 18.8 kg | 16.4 kg |
| Precision class | PN — Normal (ISO 492:2023) | — |
| Cage | MP — Solid brass cage, rolling element guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 150 °C | — |
| Additional information | ||
| Seat washer | U324 | — |
| Aligning-seat geometry | ||
| Aligning-seat geometric referenceA1 | — | 58 mm |
| Spherical seat radiusR | — | 160 mm |
| Assembly boundary dimensions | ||
| Shaft-washer bore diameterd2 | — | 100 mm |
| Overall outside diameterD | — | 210 mm |
| Complete assembled heightT5 | — | 131.2 mm |
| Axial load ratings | ||
| Basic dynamic axial load ratingCa | — | 330000 N |
| Basic static axial load ratingC0a | — | 930000 N |
| Calculation factors | ||
| Minimum load factorA | 4.4 | — |
| Capabilities & suitability | ||
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Chamfers | ||
| Minimum housing-side chamferr min. | — | 2.1 mm |
| Minimum shaft-side chamferr1 min. | — | 1.1 mm |
| Component dimensions | ||
| Central shaft washer outside diameterd3 | — | 209.5 mm |
| Housing washer bore diameterD1 | — | 123 mm |
| Adjacent shaft diameter shown in the catalogue drawing — not the bored | — | 120 mm |
| Central shaft washer thicknessB | — | 27 mm |
| Partial axial height in the assembly drawingT6 | — | 79.1 mm |
| Construction | ||
| Axial load directions | — | Both directions |
| Seat construction | — | Aligning seat |
| Radial-load support | — | Not suitable for radial load; separate radial support required |
| Dimensions | ||
| Inner diameter housing washerD1 | 123 mm | — |
| Inner diameter housing washerD1 | 4.843 in | — |
| Height shaft washerB | 27 mm | — |
| Height shaft washerB | 1.063 in | — |
| Minimum chamfer dimensionrmin | 2.1 mm | — |
| Minimum chamfer dimensionrmin | 0.083 in | — |
| Minimum chamfer dimensionr1 min | 1.1 mm | — |
| Minimum chamfer dimensionr1 min | 0.043 in | — |
| Radius spherical housing washerR | 160 mm | — |
| Radius spherical housing washerR | 6.299 in | — |
| Distance of the center pointA | 58 mm | — |
| Distance of the center pointA | 2.283 in | — |
| Height with seat washerT3 | 143 mm | — |
| Height with seat washerT3 | 5.63 in | — |
| Bore diameter seat washerD2 | 165 mm | — |
| Bore diameter seat washerD2 | 6.496 in | — |
| Outside diameter seat washerD3 | 220 mm | — |
| Outside diameter seat washerD3 | 8.661 in | — |
| Height seat washerC | 22 mm | — |
| Height seat washerC | 0.866 in | — |
| Lubrication-qualified speed | ||
| Limiting speed — grease | — | 750 r/min |
| Limiting speed — oil | — | 1100 r/min |
| Main Dimensions & Performance Data | ||
| Inner diameter shaft washerd | 100 mm | — |
| Inner diameter shaft washerd | 3.937 in | — |
| Outer diameter housing washerD | 210 mm | — |
| Outer diameter housing washerD | 8.268 in | — |
| Basic dynamic load rating, axialCa | 325,000 N | — |
| Basic dynamic load rating, axialCa | 73,066.547 lbf | — |
| Basic static load rating, axialC0a | 910,000 N | — |
| Basic static load rating, axialC0a | 204,586.331 lbf | — |
| Fatigue load limit, axialCua | 32,500 N | — |
| Fatigue load limit, axialCua | 7,306.655 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 395058 | — |
| Base Type | 54324 | — |
| Old Designation | ["54324MP"] | — |
| Gpsd Group | S03 | — |
| Product Line Id | 14 | — |
| X Life Marking | n.r. | — |
| SAP material number | 0381253660000 | — |
| Base product | 2305100102 | — |
| Bearing X designation | 54324-MP | — |
| Mounting Manager ID | 54324-MP | — |
| Grease application ID | 54324-MP | — |
| Mass reference | ||
| Approximate assembly mass | — | 16.4 kg |
| Mounting dimensions | ||
| Maximum housing abutment diameterDa max. | — | 165 mm |
| Maximum housing-side fillet radiusra max. | — | 2 mm |
| Maximum shaft-side fillet radiusrb max. | — | 1 mm |
| Maximum diameter shaft shoulderda max | 120 mm | — |
| Maximum diameter shaft shoulderda max | 4.724 in | — |
| Maximum diameter of housing shoulderDa max | 165 mm | — |
| Maximum diameter of housing shoulderDa max | 6.496 in | — |
| Maximum filled radiusra max | 2.1 mm | — |
| Maximum filled radiusra max | 0.083 in | — |
| Maximum filled radiusra1 max | 1 mm | — |
| Maximum filled radiusra1 max | 0.039 in | — |
| Product characteristics | ||
| Tolerance classPN | Normal (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | Rings dimensional stabilized up to 150° | — |
| Product Identity | ||
| Construction | Axial deep groove ball bearing 543..-MP, double direction, with spherical housing washer, solid brass cage | — |
| Short Description | Axial deep groove ball bearing | — |
| Technical Data | ||
| Inner Diameter Shaft Washer (D) | 100 mm | — |
| Outside Diameter (D) | 210 mm | — |
| Height (T2) | 131.2 mm | — |
| Basic Dynamic Load Rating, Axial (Ca) | 325,000 N | — |
| Basic Static Load Rating, Axial (C0A) | 910,000 N | — |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Limiting Speed (Ng) | 1,610 1/min | — |
| Operating Temperature Max. (Tmax) | 150 °C | — |
| Reference Speed (Nϑr) | 3,100 1/min | — |
| Bore Diameter Seat Washer (D2) | 165 mm | — |
| Height Seat Washer (C) | 22 mm | — |
| Height Shaft Washer (B) | 27 mm | — |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 120 mm | — |
| Minimum Load Factor (A) | 4.4 | — |
| Outside Diameter Seat Washer (D3) | 220 mm | — |
| Distance Of The Center Point (A) | 58 mm | — |
| Height With Seat Washer (T3) | 143 mm | — |
| Bore Diameter Housing Washer (D1) | 123 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | 165 mm | — |
| Minimum Chamfer Dimension (Rmin) | 2.1 mm | — |
| Maximum Fillet Radius (Ra Max) | 2.1 mm | — |
| Maximum Recess Radius (Ra1 Max) | 1 mm | — |
| Radius Spherical Housing Washer (R) | 160 mm | — |
| Minimum Chamfer Dimension (R1 Min) | 1.1 mm | — |
| Fatigue Load Limit, Axial (Cua) | 32,500 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 150 °C | — |
| Operating temperature max.Tmax | 302 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.